Commit graph

1187 commits

Author SHA1 Message Date
Bjørn Forsman 395bc5d05c lighttpd: restart service if config changes
Using /etc/lighttpd.conf "hides" the config file from NixOS so that it
will not automatically restart the service when its config file changes.
So don't do that.
2013-03-31 18:06:43 +02:00
Lluís Batlle i Rossell 86c1e10a43 Setting pam otpw *after* pam_unix, for dovecot failed auth messages.
I think it's nice that it first asks the usual password, and then offers the
otpw one if enabled. That enables dovecot to show the last pam prompt.

I also add the dovecot option for that.
2013-03-30 22:25:19 +01:00
Eelco Dolstra c2977f134e nix-gc.timer: Fix the start time 2013-03-28 13:35:07 +01:00
Eelco Dolstra 7ad91f31d6 Add support for systemd timers 2013-03-28 11:54:19 +01:00
Eelco Dolstra 9c3a31ff4c Clear /proc/sys/kernel/hotplug again
Otherwise the kernel will pointlessly try to invoke /sbin/hotplug all
the time.  Another feature lost in the systemd switch.
2013-03-27 23:03:37 +01:00
Eelco Dolstra f3bea050f8 Updates for systemd 198/199 2013-03-27 23:03:37 +01:00
Eelco Dolstra 8b9216fdcb Don't set the firmware path in 3 different places 2013-03-27 23:03:37 +01:00
Domen Kozar c52cb9bb65 add almir service 2013-03-27 11:47:28 +01:00
Eelco Dolstra 991a78dd8b Use nixUnstable 2013-03-26 15:58:38 +01:00
Mathijs Kwik b5e2ff4bed mongodb: v8 is the default javascript engine now 2013-03-25 08:10:36 +01:00
Eelco Dolstra cc6bd6d7bb Fix evaluation if driSupport32Bit is enabled on NVIDIA 2013-03-24 22:08:01 +01:00
Nicolas B. Pierron 8b2256686b Merge pull request #123 from MarcWeber/feed-upstream/toList
replace list by listOf using same style as for attrsOf
2013-03-23 16:21:21 -07:00
Domen Kozar b8a1ccd16a Add bacula service 2013-03-23 01:23:59 +01:00
Peter Simons 83e7689d02 Merge pull request #107 from Davorak/fixXorgVMware
Fix Xorg-server on vmware inconjunction with
2013-03-21 03:18:05 -07:00
Rob Vermaas ef28e8e70e Add WorkingDirectory default configuration value for rsyslog. 2013-03-17 21:36:25 +01:00
Rob Vermaas 9a9b53aa9f Add module for rsyslog. Although rsyslog is supposed to be a drop-in
replacement for sysklogd, it lacks some support for certain arguments
used in the default syslog module of NixOS.
2013-03-15 12:55:49 +01:00
Rickard Nilsson be698e93a4 Merge hardware.pulseaudio and services.pulseaudio
More specifically, this removes services.pulseaudio and adds the option
hardware.pulseaudio.systemWide which defaults to false but can be used to turn
on the system-wide PulseAudio server (previously defined in
services.pulseaudio). Since the two PulseAudio modes are mutually exclusive
anyway (maybe not strictly true, but I don't think is a good idea combining
them) its nicer to be able to reuse server and ALSA configuration between them.

Also the system-wide PulseAudio service has been adjusted to systemd, and a few
things has been fixed (there was no alsa.conf before, for example).

The bottomline is that people that was using hardware.pulseaudio before should
be able to keep doing it in exactly the same way, and people that used
services.pulseaudio must switch over to hardware.pulseaudio.systemWide instead.
2013-03-14 23:33:45 +01:00
Marc Weber f3e6b42258 replace list by listOf using same style as for attrsOf 2013-03-14 17:09:21 +01:00
Shea Levy 6e20c697cd alsa-store.service: Avoid unnecessary shell
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-03-13 19:58:35 -04:00
Shea Levy 7bbf034f93 alsa-store.service: Ensure /var/lib/alsa exists
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-03-13 19:48:58 -04:00
Peter Simons 415ff3c39a smartd: change 'devices' option from "list of strings" to "list of attribute sets"
The smartd used to expect a list of devices to monitor. After this patch, it
expects a list of attribute sets, which may have two attributes:

 - device: path to the device (required)
 - options: smartd options to apply to this particular device (optional)

A concrete example configuration would be:

  services.smartd = {
    enable = true;
    devices = [ { device = "/dev/sda"; } { device = "/dev/sdb"; options = "-d sat"; } ];
  };

Furthermore, the config option 'deviceOpts' can be used to configure options
that are applied to *every* device.
2013-03-10 01:19:44 +01:00
Vladimír Čunát a3d8e6eeba xfce: update the xinitrc path 2013-03-09 10:55:57 +01:00
Bjørn Forsman d89ba0697f Add Transmission BitTorrent service
Enable it with

  services.transmission.enable = true;

and optionally configure it

  services.transmission.settings =
    {
      download-dir = "/srv/torrents/";
      incomplete-dir = "/srv/torrents/.incomplete/";
      incomplete-dir-enabled = true;
      rpc-whitelist = "127.0.0.1,192.168.*.*";
      # for users in group "transmission" to have access to torrents
      umask = 2;
    };

The above settings are written/merged into settings.json each time the
service is about to start.
2013-03-08 16:47:09 +01:00
Shea Levy 35093b8a28 Silence a harmless warning on kernels without the 'path' parameter for firmware_class. 2013-03-05 20:33:41 -05:00
Lluís Batlle i Rossell a9b3dbf8ea Fixing the vaapiDrivers; it didn't work, with only one driver 2013-03-04 22:35:33 +01:00
Shea Levy 70378ad2b7 Add our firmware path to the in-kernel lookup path
Newer kernels (since torvalds/linux@abb139e75c) try to
read firmware directly from the filesystem before falling back to a
userspace helper (udev) if firmware cannot be found (in even newer
kernels, the fallback path can be disabled altogether). By default, only
certain paths in /lib/firmware* are searched, so this was initially not
helpful for NixOS.

Since torvalds/linux@2760284206 (which,
based on the commit message, was implemented just for NixOS, go us!),
though, an extra path can be dynamically prepended to the search path.
So do that, in three ways:

1. Pass a kernel command line option in case the module is built-in
2. Add a line to modprobe.conf in case the module isn't yet loaded by
activation-time
3. Add an activation script to set the option in /sys in case the module
is already loaded by activation-time.
2013-03-04 09:42:03 -05:00
Rickard Nilsson 5737604b13 xfce: Set GTK_PATH to system.path/lib/gtk-2.0, so xfce can find all theme engines. 2013-03-04 10:51:33 +01:00
Bjørn Forsman 61c07244e8 Add lighttpd web server module 2013-03-03 20:16:44 +01:00
Domen Kozar 854a37aa7e add most basic nginx service 2013-03-03 12:12:17 +01:00
Patrick Wheeler fc7c7ae91a Remove vmware comment 2013-03-01 11:05:00 -06:00
Patrick John Wheeler ea3eb991b7 Fix Xorg-server on vmware inconjunction with fix to
xf86videovmware[1].

Adds "vmware" to list of default options of
services.xerver.videoDrivers.

new default:
 [ "ati" "cirrus" "intel" "vesa" "vmware" ]

old default:
 [ "ati" "cirrus" "intel" "vesa" ]

[1] Pull request for xf86videovmware found at
https://github.com/NixOS/nixpkgs/pull/338.
2013-03-01 02:53:08 +01:00
Rickard Nilsson 568683316b mpd: Start service with exec 2013-02-28 19:26:19 +01:00
Shea Levy 7ac425a22f Merge pull request #102 from iElectric/deluge
Add deluged and deluge.web services
2013-02-27 11:19:08 -08:00
Domen Kozar c50d7cbc8d use ExecStart instead of script, this way we get rid of systemd wrapper scripts 2013-02-27 20:13:14 +01:00
Domen Kozar bb89f2eb99 We don't need an explicit uid/gid. We also don't need web to depend
on deluged, since it can be started before it.
2013-02-27 20:06:10 +01:00
Shea Levy f3d4d24d6b dd-agent: Run as a separate user 2013-02-27 09:25:37 -05:00
Domen Kozar 71f4330d3f use path to deluge script correctly 2013-02-27 10:58:28 +01:00
Domen Kozar 99edd5d575 run deluge under deluge user/group 2013-02-26 22:53:52 +01:00
Eelco Dolstra 85188d19c5 nix-daemon: Restart when nix.conf changes 2013-02-26 03:15:29 +01:00
Domen Kozar 259fd8e34a don't use quotes when setting example to true 2013-02-25 22:39:47 +01:00
Rickard Nilsson cc3549fa34 Add ActiveMQ service 2013-02-25 16:50:10 +01:00
Rickard Nilsson e44021494c mongodb: Add initialisation service
The mongodb service runs as user mongodb, and therefore
the preStart-script has no permissions to set up mongodb
directories. This is solved by adding an initialisation
service that runs as root and just sets up the required
directories.
2013-02-25 09:04:31 +01:00
Domen Kozar a6f0d984fe Add deluge and deluge web services 2013-02-24 17:33:48 +01:00
Rickard Nilsson b0f33f2052 Add options for setting theme and setup-script in KDM 2013-02-22 09:34:36 +01:00
Domen Kozar a953ed57c9 mkdir musicDirecotry for mpd before startnig the service 2013-02-21 23:05:40 +01:00
Eelco Dolstra 7b8958b6c5 Fix the boot.hardwareScan option
Fixes #95.
2013-02-21 11:32:51 +01:00
viric f43729298d Merge pull request #93 from aristidb/master
Implementation: services.xserver.driSupport32Bits: Intel support via mesa (#92)
2013-02-20 11:52:22 -08:00
Vladimír Čunát c2a213e559 Merge pull request #70 from cpages/master
Support driSupport32Bit for nvidia legacy 304
2013-02-19 11:29:14 -08:00
Aristid Breitkreuz 37be1c8982 x11/mesa: driSupport32Bit for the mesa implementation 2013-02-19 18:28:25 +01:00
Shea Levy b83be79adf default-websockify: Stop when reconfigured (i.e. new ports added/removed) 2013-02-18 11:55:46 -05:00