Commit graph

792 commits

Author SHA1 Message Date
Jörg Thalheim 6fae5631b2
systemd-nspawn: add NotifyRead fixup 2017-05-20 20:32:45 +01:00
Jörg Thalheim 4698012c52
systemd-nspawn: add NotifyRead option 2017-05-20 20:31:38 +01:00
Rickard Nilsson a92bdc54e3 nixos/luks: Silence killall complain about non-existing cryptsetup processes 2017-05-16 09:50:10 +02:00
Jörg Thalheim e33848568d
systemd-boot: document reasoning behind syncfs(2) 2017-05-10 10:32:26 +01:00
Jörg Thalheim e3beb07108
systemd-boot: sync efi filesystem after update
Since fat32 provides little recovery facilities after a crash,
it can leave the system in an unbootable state, when a crash/outage
happens shortly after an update. To decrease the likelihood of this
event sync the efi filesystem after each update.
2017-05-09 19:06:27 +01:00
Jörg Thalheim fa5196e47e Merge pull request #25005 from Lassulus/copytoram
nixos/stage1: add copytoram support
2017-04-30 11:22:45 +02:00
lassulus 87a4615e27 nixos/stage1: add copytoram support 2017-04-28 20:48:09 +02:00
aszlig 72f2b506c7
nixos/grub: Add another example for extraEntries
Someone on IRC wanted to boot Fedora from another disk. While I'm not
too familiar with UEFI booting in conjunction with GRUB2 it took some
time to get it to work.

So in order to safe others from frustration I'm adding this as another
example to the extraEntries option.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-04-25 08:50:43 +02:00
aszlig e662e035f9
nixos/systemd-boot-builder: Don't write .pyc files
This has surfaced since d990aa7163.

The "simpleUefiGummiboot" installer test fails since this commit,
because that commit introduced a small check to verify whether the store
was altered.

While installing NixOS for the first time, the store is usually in
/mnt/nix/store and without the read-only bind mount that's preventing
programs from altering the store.

So after nixos-install is done creating the system closure and setting
it as the active system profile, the bootloader is written from the
closure inside the chroot. The systemd-boot-builder is invoked during
this step, which adds .pyc files for various Python modules of the
Python 3 store path, which in turn invalidates the hash of the Python 3
store path itself.

At the time the system is booted up again, the nix-store is verified and
fails with something like this:

path /nix/store/zvm545rqc4d97caqq9h7344bnd06jhzb-python3-3.5.3 was
modified! expected hash
b2c975f4b8d197443fbb09690fb3f6545e165dd44c9309d7d6df2fce0579ebeb, got
bccca19f39c9d26d857ccf1fb72818b2b817967e6d497a25a1283e36ed0acf01

Running the interpreter with the -B argument prevents Python from
writing those byte code files:

https://docs.python.org/3/using/cmdline.html#cmdoption-B

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-04-20 00:37:02 +02:00
Vladimír Čunát 91ad6b3597
Revert "grub module: fix efiInstallAsRemovable description"
This reverts commit c2b56626f1.
It broke creating the manual.  I suspect the descriptions are
auto-wrapped by <para> and </para>.

We've been through this already in 3af715af90.
/cc #24978, @zraexy, @Mic92.
2017-04-18 14:26:36 +02:00
zraexy c2b56626f1 grub module: fix efiInstallAsRemovable description 2017-04-17 14:45:56 -08:00
Domen Kožar 635822da82
nixos: escape brackets in systemd units
One day we should just whitelist instead of blacklist chars.

Fixes https://github.com/NixOS/nixops/issues/614
2017-04-12 15:56:26 +02:00
Jörg Thalheim b4820d4948 Merge pull request #24645 from Mic92/stage-2
Stage-2 cleanup
2017-04-08 21:52:22 +02:00
Jörg Thalheim 62c79a1de8
stage-2: shellsheck recommendations 2017-04-05 21:40:57 +02:00
Jörg Thalheim e3f031b200
stage-2: reduce mkdir commands 2017-04-05 21:40:51 +02:00
Michael Weiss a6420e13a2 luksroot: Wait for the header (device) to appear
The LUKS header can be on another device (e.g. a USB stick). In my case
it can take up to two seconds until the partition on my USB stick is
available (i.e. the decryption fails without this patch). This will also
remove some redundancy by providing the shell function `wait_target` and
slightly improve the output (one "." per second and a success/failure
indication after 10 seconds instead of always printing "ok").
2017-04-05 20:39:03 +02:00
Jörg Thalheim a17344c2ad
stage-2: process options as first action
this way `set -x` is set early
2017-04-05 09:05:18 +02:00
Jörg Thalheim b42af25223
stage-2: replace readonly-mountpoint by findmnt 2017-04-05 09:05:18 +02:00
Jörg Thalheim a5ad8b4f69
stage-2: simplify exporting path 2017-04-05 09:05:13 +02:00
Eelco Dolstra e84d5b23e1
Allow systemd-fsck@.service to find fsck.*
Fixes "fsck.ext4 doesn't exist, not checking file system on ...".
2017-04-04 18:17:05 +02:00
Eelco Dolstra de51ad6cd1
Don't restart systemd-fsck@ units
Restarting them is useless since the filesystem is already
checked. Worse, restarting them causes the filesystem to be unmounted.

Also remove an override for systemd-rkill@.service which no longer
exists.
2017-04-04 16:40:18 +02:00
Shea Levy 3a26d09e15 initrd-ssh: Use initrd secrets for host keys 2017-04-02 16:33:37 -04:00
Shea Levy b09490a322 systemd-boot: Support initrd secrets 2017-04-02 16:33:37 -04:00
Shea Levy 59c0977300 Add facility to append secrets to the initrd 2017-04-02 16:33:37 -04:00
Symphorien Gibol a6665adde8 grub module: fix useOSProber when installing grub as EFI 2017-03-23 12:53:44 +01:00
Franz Pletz fb50cde71e
nixos/treewide: systemd.time is in manvolume 7
cc #23396
2017-03-21 08:28:53 +01:00
Franz Pletz 9536169074
nixos/treewide: remove boolean examples for options
They contain no useful information and increase the length of the
autogenerated options documentation.

See discussion in #18816.
2017-03-17 23:36:19 +01:00
Benjamin Staffin f474f82860 ykpers: consolidate into yubikey-personalization
Looks like this accidentally got packaged twice.
2017-03-11 16:23:00 -05:00
Franz Pletz 66f553974b
dhcpcd service: fix network-online.target integration
When dhcpcd instead of networkd is used, the network-online.target behaved
the same as network.target, resulting in broken services that need a working
network connectivity when being started.

This commit makes dhcpcd wait for a lease and makes it wanted by
network-online.target. In turn, network-online.target is now wanted by
multi-user.target, so it will be activated at every boot.
2017-02-23 16:07:40 +01:00
Kevin Cox da33c8a19d
systemd: Properly escape environment options.
Using toJSON on a string value works because the allowed JSON escape
sequences is almost a subset of the systemd allowed escape sequences.
The only exception is `\/` which JSON allows but systemd doesn't.
Luckily this sequence isn't required and toJSON don't produce it making
the result valid for systemd consumption.

Examples of things that this fixes are environment variables with double
quotes or newlines.
2017-02-20 22:20:13 -05:00
aszlig dc31a1ea29
systemd-boot: Unlink loader.conf if it exists
Since systemd version 232 the install subcommand of bootctl opens the
loader.conf with fopen() modes "wxe", where the "e" stands for
exclusive, so the call will fail if the file exists.

For installing the boot loader just once this is fine, but if we're
using NIXOS_INSTALL_BOOTLOADER on a systemd where the bootloader is
already present this will fail.

Exactly this is done within the simpleUefiGummiboot installer test,
where nixos-install is called twice and thus the bootloader is also
installed twice, resulting in an error during the fopen call:

Failed to open loader.conf for writing: File exists

Removing the file prior to calling bootctl should fix this.

I've tested this using the installer.simpleUefiGummiboot test and it now
succeeds.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra, @shlevy, @mic92
Fixes: #22925
2017-02-20 14:54:48 +01:00
aszlig 4daccf208f
systemd-boot: Make sure /etc/machine-id exists
This leads to the following error when trying to install a new machine
where the machine ID wasn't yet initialized during boot:

Failed to get machine did: No such file or directory

In addition this was also detected by the simpleUefiGummiboot installer
test.

So let's generate a fallback machine ID by using
systemd-machine-id-setup before actually running bootctl.

Tested this by running the installer.simpleUefiGummiboot test, it still
fails but not because of the machine ID.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra, @shlevy, @mic92
Fixes: #22561
2017-02-20 14:54:44 +01:00
Franz Pletz 60555c7c0a Merge pull request #22969 from symphorien/extrainitrd
grub module: add extraInitrd option
2017-02-20 04:32:48 +01:00
Symphorien Gibol 9ed2846e04 grub module: add extraInitrd option 2017-02-19 10:50:22 +01:00
Brice Waegeneire 47c214cc2a fix comments about nixos-hardware-scan
It has been renamed to nixos-generate-config in 3ed4173
2017-02-18 13:29:47 +01:00
Profpatsch bb797c1390 networking.networkd: adjust autmatic mapping of bonds
Since the bonds interface changed to a lot more possible values we create a
mapping of kernel bond attribute names and values to networkd attributes.
Those match for the most part, but have to transformed slightly.

There is also an assert that unknown options won’t slip through silently.
2017-02-16 21:24:40 +01:00
Robin Gloster af9f44dd57
grub: fix capitalisation
Missed this occurence while renaming the option
2017-02-13 14:55:36 +01:00
symphorien 0b87efacb1 grub: add grub.useOSProber option (#22558) 2017-02-13 14:53:15 +01:00
Graham Christensen 4f34e030a5 Merge pull request #22677 from grahamc/drop-kdm-kde4-modules
Drop kdm and kde4 modules
2017-02-12 08:36:33 -05:00
Ricardo M. Correia 123cbd40c2 raspberryPi boot loader: don't remove xx-initrd files
The Raspberry Pi boot loader was deleting all xx-initrd text files
(which simply contain the path to the actual initrd files) just after
having created them. The code was actually trying to delete real,
obsolete initrd files, which are named <hash>-initrd-initrd (after path
cleaning), but the glob was catching the other files as well.
2017-02-12 02:48:57 +02:00
Ricardo M. Correia c19b17d14f raspberryPi boot loader: fix booting Raspberry Pi 3
The Raspberry Pi 3 seems to need the .DTB file when booting the kernel,
so we must copy it to /boot when installing a new kernel.
2017-02-12 02:48:57 +02:00
Graham Christensen 3cec7d10df
kdm: drop service 2017-02-11 13:55:09 -05:00
Nikolay Amiantov 6f7811143d systemd service: don't install systemd-hwdb-update 2017-02-08 21:42:07 +03:00
Antoine Eiche 9d30099b7f nixos/systemd: set r-x group permissions on /var/log/journal
This allows services such as systemd-journal-gateway to access the
systemd journal.

Closes #22288
2017-02-08 16:06:14 +03:00
Nikolay Amiantov 90bc1a8595 Merge pull request #22353 from abbradar/bluetooth
Bluetooth improvements
2017-02-05 13:18:48 +03:00
Nikolay Amiantov 8ef14f80e3 systemd service: add aliases option 2017-02-02 00:52:54 +03:00
Robin Gloster a38f1911d3
systemd: 231 -> 232
Includes adding some more upstream units and removing obsolete (-.slice) ones.
2017-01-26 17:52:52 +01:00
Franz Pletz 068dad3a21
systemd-boot: fix evaluation 2017-01-21 14:42:10 +01:00
Linus Heckemann 98bd722d1d systemd-boot: allow setting editor security option (#21853) 2017-01-21 14:24:26 +01:00
Franz Pletz e4fb2bb0c5
Revert "nixos/stage2: Check for each special mount individually and mount missing ones. (#21370)"
This reverts commit 712e62c260.

This commit broke NixOS containers. Systemd wouldn't detect if a container
started successfully and would kill it again after a grace period.

Additionally this prints mount errors due to already mounted filesystems
at boot.
2017-01-10 17:35:38 +01:00
Sebastian Hagen 712e62c260 nixos/stage2: Check for each special mount individually and mount missing ones. (#21370) 2017-01-09 10:32:23 +01:00
Eelco Dolstra b297af42d2
Fix using ephemeral disks for /tmp etc. in EC2 instances
This code in amazon-image.nix:

  if mountFS "$device" "$mp" "" auto; then
    if [ -z "$diskForUnionfs" ]; then diskForUnionfs="$mp"; fi
  fi

relies on mountFS to return a zero exit status if mounting
succeeds. But the lustrateRoot check in mountFS was causing a non-zero
exit status. As a result /disk0 would be mounted, but not used for
/tmp.

(cherry picked from commit d082ed8c35dec48aee2afd1303b3c8b2a1b242b0)
2017-01-03 17:32:42 +01:00
Markov Dmitry efd5508b89 systemd: add slice support 2016-12-20 10:49:08 +01:00
Jörg Thalheim 579051fe66 networkd: add extraConfig to all units
networkd options are always correct or up to date. This option allows to by
pass type checking. It is also easier to write because examples can be just copy
and paste from manpages.
2016-12-17 15:23:34 +01:00
Jörg Thalheim d49e0d5fa5 networkd: allow to supply own unit files
Networkd units can contain secrets. In future also wireguard vpn will be supported by
networkd. To avoid leakage of private keys, those could be then also put outside
of the /nix/store

Having a writeable /etc/systemd/network also allows to quick fix network issues,
when upgrading `nixos-rebuild switch` would require network on its own (due
updates).
2016-12-17 15:23:34 +01:00
Bjørn Forsman 3af715af90 Revert "fix 2 xml errors in the description of boot.loader.grub.efiInstallAsRemovable"
This reverts commit 656cc3acaf because it
causes building the manual to fail:

  $ nixos-rebuild build
  ...
  building path(s) ‘/nix/store/s9y5z78z5pssvmixcmv9ix13gs8xj87f-manual-olinkdb’
  Writing /nix/store/s9y5z78z5pssvmixcmv9ix13gs8xj87f-manual-olinkdb/manual.db for book(book-nixos-manual)
  ./man-pages.xml:625: element para: Relax-NG validity error : Did not expect element para there
  ./man-pages.xml:3: element variablelist: Relax-NG validity error : Element refsection has extra content: variablelist
  ./man-pages.xml:29: element refsection: Relax-NG validity error : Element refentry has extra content: refsection
  ./man-pages.xml:3: element reference: Relax-NG validity error : Element reference failed to validate content
  ./man-pages.xml fails to validate

CC @cleverca22, @Mic92
2016-12-17 11:45:31 +01:00
Jörg Thalheim 1590461887 ntp: make timesyncd the new default
- most nixos user only require time synchronisation,
  while ntpd implements a battery-included ntp server (1,215 LOCs of C-Code vs 64,302)
- timesyncd support ntp server per interface (if configured through dhcp for instance)
- timesyncd is already included in the systemd package, switching to it would
  save a little disk space (1,5M)
2016-12-17 00:00:45 +01:00
michael bishop 656cc3acaf fix 2 xml errors in the description of boot.loader.grub.efiInstallAsRemovable 2016-12-16 20:39:40 +01:00
michael bishop e5cefadef7 fix indentation in several nixos option descriptions 2016-12-16 18:29:25 +01:00
Joachim Fasting f9f354faad
nixos/modules: use defaultText where applicable
Primarily to fix rendering of these default values in the manual but
it's also nice to avoid having to eval these things just to build the
manual.
2016-11-21 16:35:15 +01:00
Jörg Thalheim cb8af0ca51 Merge pull request #19379 from nixy/master
grub bootloader: add forceInstall option
2016-11-21 15:15:45 +01:00
Jörg Thalheim c54d2860dc Merge pull request #20469 from Mic92/initrd-ssh
initrd-ssh: fix authorized_key generation with multiple keys
2016-11-18 23:16:44 +01:00
Jörg Thalheim 7ad01f5f0c initrd-ssh: fix authorized_key generation with multiple keys
multiple entries should be separated by newline
2016-11-16 14:47:37 +00:00
Eric Sagnes 4a600b0437 raspberrypi module: use enum 2016-11-16 22:37:36 +09:00
Eric Sagnes 80b854739c grub module: use enum 2016-11-04 13:05:13 +09:00
Andrew R. M a31bf8961a grub bootloader: add forceInstall option
Using the --force option on GRUB isn't recommended, but there are very
specific instances where it makes sense. One example is installing on a
partitionless disk.
2016-11-03 05:50:42 -04:00
aszlig 3d4b6257d6
nixos/stage1: Fix local keyword outside function
Thanks to @NeQuissimus in a5c1985fef for
updating busybox, which since version 1.25 doesn't allow local variables
outside of functions anymore (which is the desired behaviour).

See the following upstream commit of busybox which is the change that
let's this problem surface:

https://git.busybox.net/busybox/commit/?id=ef2386b80abfb22ccb697ddbdd4047aacc395c50

So this has been an error I've made on my end in
67223ee205, because I originally had a
function for killing the processes but desired to inline it because it's
only used in one place.

This fixes the boot-stage1 NixOS test.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2016-10-28 22:50:44 +02:00
Eelco Dolstra e6088f77be initrd: Include i8042 kernel module
For some reason, between Linux 4.4.19 and 4.4.20, the atkbd and libps2
kernel modules lost their dependency on i8042 in modules.dep, causing
i8042 not to be included in the initrd. This breaks keyboard in the
initrd, in turn breaking LUKS.

This only happens on the 16.03 branch; on 16.09, it appears i8042 is
pulled into the initrd anyway (through some other dependency,
presumably). But let's include it explicitly.

http://hydra.nixos.org/build/40468431
2016-10-21 14:27:11 +02:00
Tim Steinbach 99d9d32899 Merge pull request #19668 from groxxda/timers
systemd.timers: automatically convert string to list
2016-10-20 17:37:28 -04:00
Eric Sagnes 87318e9820 nspawn module: optionSet -> submodule 2016-10-21 01:31:54 +09:00
Alexander Ried 8bb4fc1039 systemd.timers: filter timers with empty startAt 2016-10-19 02:22:12 +02:00
Alexander Ried c9941c4b5e systemd.timers.startOn: automatically convert string to list 2016-10-19 02:22:12 +02:00
Charles Strahan da36847d92
nixos: make it easy to apply kernel patches
This makes it easy to specify kernel patches:

    boot.kernelPatches = [ pkgs.kernelPatches.ubuntu_fan_4_4 ];

To make the `boot.kernelPatches` option possible, this also makes it
easy to extend and/or modify the kernel packages within a linuxPackages
set. For example:

    pkgs.linuxPackages.extend (self: super: {
      kernel = super.kernel.override {
        kernelPatches = super.kernel.kernelPatches ++ [
          pkgs.kernelPatches.ubuntu_fan_4_4
        ];
      };
    });

Closes #15095
2016-10-11 19:59:00 -04:00
Alexander Ried ce7739a4dd systemd.nspawn: add definition (#18320)
this adds the option to manage systemd.nspawn files via
config.systemd.nspawn. The files are placed in "/etc/systemd/nspawn".
2016-10-08 16:10:56 +02:00
Thomas Tuegel d067b7bd35
Merge branch 'kde-5' into staging 2016-10-04 21:50:17 -05:00
Jörg Thalheim e5c6f35a49 Merge pull request #19069 from peterhoeg/targets
systemd: add user target support
2016-10-03 23:10:18 +02:00
Jörg Thalheim 888f6a1280 Merge pull request #19199 from wizeman/u/fix-help2man-hash
help2man: fix hash
2016-10-03 19:26:44 +02:00
Jörg Thalheim 08cb89ae19 Merge pull request #19102 from Mic92/systemd-boot
systemd-boot: port builder to python3
2016-10-03 10:47:18 +02:00
Eric Sagnes 24aacc3b43 networkd module: fix submodule options declaration 2016-10-03 13:02:42 +09:00
Joachim F 0906a0f197 Merge pull request #18491 from groxxda/network-interfaces
Replace Network-interfaces.target
2016-10-02 16:34:37 +02:00
Tuomas Tynkkynen 19225bf5cc Merge remote-tracking branch 'upstream/master' into staging 2016-10-02 10:36:47 +03:00
Joachim F 7e80c42b0e Merge pull request #18511 from ericsagnes/feat/remove-optionSet
modules: optionSet -> submodule
2016-10-01 17:57:45 +02:00
Nikolay Amiantov ff0b8b2225 systemd-journald service: restart instead of stop and start
Also restart when configuration is changed.
2016-09-30 17:49:30 +03:00
Jörg Thalheim 8bb4551273
systemd-boot: inline add_entry function 2016-09-30 13:56:19 +02:00
Jörg Thalheim 4e0423467a
systemd-boot: port builder to python3
see #18185
2016-09-30 13:28:42 +02:00
Eelco Dolstra 97bfc2fac9 runCommand: Use stdenvNoCC
This ensures that most "trivial" derivations used to build NixOS
configurations no longer depend on GCC. For commands that do invoke
gcc, there is runCommandCC.
2016-09-29 13:06:43 +02:00
Eelco Dolstra 75a1ec8a65 NixOS: Use runCommand instead of mkDerivation in a few places 2016-09-29 13:05:28 +02:00
Peter Hoeg 1049fd49ed systemd: add user target support
This allows us to define system user targets in addition to the existing
services, timers and sockets.

Furthermore, we add a top-level configuration keyword:

 - Documentation
2016-09-29 17:02:10 +08:00
jokogr b12debc076 grub: Do not check for duplicated devices in mirroredBoots on UEFI (#18625)
When Grub is to be used with UEFI, it is not going to write to any MBR
of any disk. As such, it is safe to use multiple "nodev" device entries
when mirroring the ESP partition to multiple disks.

E.g.:

```
boot.loader.grub = {
  enable = true;
  version = 2;
  zfsSupport = true;
  efiSupport = true;
  mirroredBoots = [
    { devices = [ "nodev" ]; path = "/boot1"; efiSysMountPoint = "/boot1"; }
    { devices = [ "nodev" ]; path = "/boot2"; efiSysMountPoint = "/boot2"; }
    { devices = [ "nodev" ]; path = "/boot3"; efiSysMountPoint = "/boot3"; }
  ];
};

boot.loader.efi.canTouchEfiVariables = true;
```

Fixes #18584
2016-09-25 07:37:18 +02:00
Nikolay Amiantov a63ca1bf3d stage-1 module: remove check that swap device has a label
All swap device option sets "have" a label, it's just that sometimes it's
undefined. Because we set a `device` attribute when we have a label anyway it's
ok to just check device prefix.

Fixes #18891.
2016-09-24 13:06:27 +03:00
Nikolay Amiantov f42e0dc9fd Merge pull request #18691 from abbradar/keys-fs
stage-2 init: move /run/keys mount to boot.specialFileSystems
2016-09-24 13:34:28 +04:00
Nikolay Amiantov 00f444d0c1 initrd-ssh service: check that authorized keys are added 2016-09-20 12:16:10 +03:00
Nikolay Amiantov 79d4636d50 stage-2 init: move /run/keys mount to boot.specialFileSystems 2016-09-17 15:39:24 +03:00
obadz 93974eb98b grub: fix manual build 2016-09-16 19:12:47 +01:00
obadz eda4f5d409 grub: clarify efiInstallAsRemovable docstring 2016-09-16 18:09:50 +01:00
obadz 1c9ac8aabc grub: add boot.loader.grub.efiInstallAsRemovable
Closes #16374
2016-09-16 18:02:36 +01:00
Eelco Dolstra 32d00f50ec Merge pull request #18573 from peterhoeg/systemd_user_cfg
systemd: support setting defaults for user instances
2016-09-14 13:39:57 +02:00
Alexander Ried e90471d792 systemd-networkd.service: remove network-interfaces.target ordering 2016-09-13 11:19:23 +02:00
Alexander Ried 2d46004b74 multi-user.target should not pull network.target 2016-09-13 11:19:22 +02:00
Eric Sagnes 79f72966e6 systemd module: optionSet -> submodule 2016-09-13 12:56:36 +09:00
Eric Sagnes 78858f2f8d networkd module: optionSet -> submodule 2016-09-13 12:56:05 +09:00
Eric Sagnes 96f5788346 luksroot module: optionSet -> submodule 2016-09-13 12:53:13 +09:00
Eric Sagnes 55e437806a grub module: optionSet -> submodule 2016-09-13 12:53:12 +09:00
Franz Pletz c58654e2b7
treewide: fix fallout of ip-up deprecation
See #18319 for details. Starting network-online.target manually does not
work as it hangs indefinitely.

Additionally, don't treat avahi and dhcpcd special and sync their systemd units
with the respective upstream suggestion.
2016-09-11 08:13:04 +02:00
Alexander Ried 27bc34f1e4 treewide: deprecate ip-up.target (#18319)
Systemd upstream provides targets for networking. This also includes a target network-online.target.

In this PR I remove / replace most occurrences since some of them were even wrong and could delay startup.
2016-09-10 18:03:59 +02:00
Lengyel Balázs 127924954b Linux-kernel: Workaround for https://github.com/NixOS/nixpkgs/issues/18451
remove after upstream gets fixed
2016-09-09 11:47:48 +02:00
Peter Hoeg 23b76b23f5 support user config 2016-09-08 16:40:54 +08:00
aszlig dd98b6fb9f
nixos/stage2: Fix mounting special filesystems
This partially reverts commit ab9537ca22.

From the manpage of systemd-nspawn(1):

  Note that systemd-nspawn will mount file systems private to the
  container to /dev, /run and similar.

Testing this in a shell turns out:

$ sudo systemd-nspawn --bind-ro=/nix/store "$(readlink "$(which ls)")" /proc
Spawning container aszlig on /home/aszlig.
Press ^] three times within 1s to kill container.
/etc/localtime does not point into /usr/share/zoneinfo/, not updating
container timezone.
1          execdomains  kpageflags    stat
acpi       fb           loadavg       swaps
asound     filesystems  locks         sys
buddyinfo  fs           meminfo       sysrq-trigger
bus        interrupts   misc          sysvipc
cgroups    iomem        modules       thread-self
cmdline    ioports      mounts        timer_list
config.gz  irq          mtrr          timer_stats
consoles   kallsyms     net           tty
cpuinfo    kcore        pagetypeinfo  uptime
crypto     key-users    partitions    version
devices    keys         scsi          vmallocinfo
diskstats  kmsg         self          vmstat
dma        kpagecgroup  slabinfo      zoneinfo
driver     kpagecount   softirqs
Container aszlig exited successfully.

So the test on whether PID 1 exists in /proc is enough, because if we
use PID namespaces there actually _is_ a PID 1 (as shown above) and the
special file systems are already mounted. A test on the $containers
variable actually mounts them twice.

This unbreaks NixOS containers and I've tested this against the
containers-imperative NixOS test.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @rickynils, @shlevy, @edolstra
2016-09-07 18:10:08 +02:00
Rickard Nilsson ab9537ca22 nixos: Generalise the container tests in stage-2 boot
This way, stage-2 behaves correctly also for libvirt-lxc containers.

Some more discussion on this:
a7a08188bf
bfe46a653b
2016-09-07 07:50:04 +00:00
Alexander Ried 53f3c2a278 systemd: add some missing upstream units 2016-09-05 15:03:46 +02:00
Alexander Ried 2fd6b36c51 networkd.module: remove before network-online
this is already upstream default
2016-09-05 15:03:35 +02:00
Alexander Ried 992c514a20 (network,remote-fs)-pre: remove duplicate wantedBy and before
this is part of (network,remote-fs).target, repectively
2016-09-05 15:03:35 +02:00
Domen Kožar a6670c1a0b Fixes #18124: atomically replace /var/setuid-wrappers/ (#18186)
Before this commit updating /var/setuid-wrappers/ folder introduced
a small window where NixOS activation scripts could be terminated
and resulted into empty /var/setuid-wrappers/ folder.

That's very unfortunate because one might lose sudo binary.

Instead we use two atomic operations mv and ln (as described in
https://axialcorps.com/2013/07/03/atomically-replacing-files-and-directories/)
to achieve atomicity.

Since /var/setuid-wrappers is not a directory anymore, tmpfs mountpoints
were removed in installation scripts and in boot process.

Tested:

- upgrade /var/setuid-wrappers/ from folder to a symlink
- make sure /run/setuid-wrappers-dirs/ legacy symlink is really deleted
2016-09-01 20:57:51 +02:00
Domen Kožar d163882770 Merge pull request #18172 from Profpatsch/startAt-type
systemd-unit-options: startAt can be a list
2016-09-01 20:44:32 +02:00
Domen Kožar f5271680c4 Fixes #14831 by using full path for binaries used in install-grub.pl
Both btrfs-progs and utillinux are ~5MB, we may discuss in future
to handle this better but I see no better way at the moment than
increaing purity in the install process.
2016-09-01 10:36:38 +02:00
Domen Kožar 2a7293fd9d install-grub.pl: fix a double slash prefix bug 2016-09-01 10:14:44 +02:00
Domen Kožar 5e5b0d039c install-grub.pl: add comments 2016-09-01 10:14:44 +02:00
Profpatsch 488f0d9cb3 systemd-unit-options: startAt can be a list
OnCalendar entrys can be specified multiple times in a systemd timer, to
make more complex scheduling possible.

Tested by manually checking the timer generated by the following:

    systemd = {
      services.huhu = {
        description = "meh";
        wantedBy = [ "default.target" ];
        serviceConfig.ExecStart = "/bin/sh -c 'printf HUHU!'";
        startAt = [ "*:*:0/30" "*:0/1:15" ];
      };
    };

It prints HUHU to the log at seconds 0, 15 and 30 of each minute.
2016-09-01 00:39:36 +02:00
Nikolay Amiantov 509733a343 Merge pull request #17822 from abbradar/systemd-mounts
nixos filesystems: unify special filesystems handling
2016-08-30 22:42:19 +04:00
obadz c7142c1aa3 Merge branch 'master' into staging 2016-08-28 13:33:13 +01:00
Domen Kožar 4af09e0031 Merge pull request #14311 from Profpatsch/mkRemovedOptionModule-replacement
mkRemovedOptionModule: add replacement argument
2016-08-28 13:55:28 +02:00
obadz 3de6e5be50 Merge branch 'master' into staging
Conflicts:
      pkgs/applications/misc/navit/default.nix
      pkgs/applications/networking/mailreaders/alpine/default.nix
      pkgs/applications/networking/mailreaders/realpine/default.nix
      pkgs/development/compilers/ghc/head.nix
      pkgs/development/libraries/openssl/default.nix
      pkgs/games/liquidwar/default.nix
      pkgs/games/spring/springlobby.nix
      pkgs/os-specific/linux/kernel/perf.nix
      pkgs/servers/sip/freeswitch/default.nix
      pkgs/tools/archivers/cromfs/default.nix
      pkgs/tools/graphics/plotutils/default.nix
2016-08-27 23:54:54 +01:00
Nikolay Amiantov 6efcfe03ae nixos filesystems: unify early filesystems handling
A new internal config option `fileSystems.<name>.early` is added to indicate
that the filesystem needs to be loaded very early (i.e. in initrd). They are
transformed to a shell script in `system.build.earlyMountScript` with calls to
an undefined `specialMount` function, which is expected to be caller-specific.
This option is used by stage-1, stage-2 and activation script to set up and
remount those filesystems.  Options for them are updated according to systemd
defaults.
2016-08-27 13:38:20 +03:00
Jan Malakhovski b267785c43 nixos: generalize copy-paste from stage-1 and zfs to utils 2016-08-23 18:14:06 +00:00
Jan Malakhovski 8da59c406c nixos: copy resize2fs only for stage-1 fileSystems 2016-08-23 18:14:05 +00:00
Jan Malakhovski 65d26c4dc1 nixos: apply toposort to fileSystems to support bind and move mounts
And use new `config.system.build.fileSystems` property everywhere.
2016-08-23 18:14:05 +00:00
obadz 0e8d2725dc Merge branch 'master' into staging 2016-08-23 18:50:06 +01:00
Jan Malakhovski 1266852fd8 Revert a soon to be useless pice of "nixos/stage-1: add mechanism which lustrates all impurities from / (#17784)"
This reverts a pice of commit 3d16af70bf.
2016-08-23 17:48:14 +00:00
Nikolay Amiantov 1df4dd6bf5 initrd-ssh service: ensure that keys got copied into initrd
Fixes #17927.
2016-08-23 16:20:26 +03:00
obadz 24a9183f90 Merge branch 'hardened-stdenv' into staging
Closes #12895

Amazing work by @globin & @fpletz getting hardened compiler flags by
enabled default on the whole package set
2016-08-22 01:19:35 +01:00
obadz ba50fd7170 Merge branch 'master' into staging 2016-08-22 01:18:11 +01:00
obadz 3d16af70bf nixos/stage-1: add mechanism which lustrates all impurities from / (#17784)
lustrate /ˈlʌstreɪt/ verb.
  purify by expiatory sacrifice, ceremonial washing, or some other
  ritual action.

- sudo touch /etc/NIXOS_LUSTRATE
  ⇒ on next reboot, during stage 1, everything but /nix and /boot
  is moved to /old-root
- echo "etc/passwd" | sudo tee -a /etc/NIXOS_LUSTRATE
  ⇒ on next reboot, during stage 1, everything but /nix and /boot
  is moved to /old-root; except /etc/passwd is copied back.

Useful for installing NixOS in place on another distro. For instance:

$ nix-env -iE '_: with import <nixpkgs/nixos> { configuration = {}; }; with config.system.build; [ nixos-generate-config manual.manpages ]'
$ sudo mkdir /etc/nixos
$ sudo `which nixos-generate-config`

… edit the configuration files in /etc/nixos using man configuration.nix
  if needed

  maybe add: users.extraUsers.root.initialHashedPassword = "" ?

… Build the entire NixOS system and link it to the system profile:
$ nix-env -p /nix/var/nix/profiles/system -f '<nixpkgs/nixos>' -A system --set

… If you were using a single user install:
$ sudo chown -R 0.0 /nix

… NixOS is about to take over
$ sudo touch /etc/NIXOS
$ sudo touch /etc/NIXOS_LUSTRATE

… Let's keep the configuration files we just created
$ echo etc/nixos | sudo tee -a /etc/NIXOS_LUSTRATE

$ sudo mv -v /boot /boot.bak &&
  sudo /nix/var/nix/profiles/system/bin/switch-to-configuration boot
$ sudo reboot

… NixOS boots, Stage 1 moves all the old distro stuff in /old-root.
2016-08-22 01:15:13 +01:00
Nikolay Amiantov 6b41f1132c nixos treewide: don't set MODULE_DIR 2016-08-19 17:56:54 +03:00
Nikolay Amiantov 5ff6e98486 modprobe service: drop kmod wrapper 2016-08-19 17:56:49 +03:00
Shea Levy 2942895d55 Merge branch 'install-bootloader-flag' 2016-08-17 21:16:29 -04:00
Julien Langlois 552c30c155 stage-1: exclude zram devices from resumeDevices 2016-08-17 00:21:47 -07:00
Shea Levy b4954a8f38 Deprecate --install-grub in favor of --install-bootloader for nixos-rebuild.
Fixes #14293
2016-08-16 07:51:58 -04:00
Shea Levy 9adad8612b Revert "Merge branch 'modprobe-fix' of git://github.com/abbradar/nixpkgs"
Was meant to go into staging, sorry

This reverts commit 57b2d1e9b0, reversing
changes made to 760b2b9048.
2016-08-15 19:05:52 -04:00
Nikolay Amiantov 1f63958772 nixos treewide: don't set MODULE_DIR 2016-08-16 00:19:25 +03:00
Nikolay Amiantov b2ebecd9e5 modprobe service: drop kmod wrapper 2016-08-16 00:19:25 +03:00
Robin Gloster b7787d932e Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-08-12 09:46:53 +00:00
Thomas Tuegel 68922e3f74 nixos/stage-1: use readlink -e in builder
The builder has this convoluted `while` loop which just replicates
`readlink -e`. I'm sure there was a reason at one point, because the
loop has been there since time immemorial. It kept getting copied
around, I suspect because nobody bothered to understand what it actually
did.

Incidentally, this fixes #17513, but I have no idea why.
2016-08-08 09:45:45 -05:00
Thomas Tuegel ee36bb8588 nixos/stage-1: fix antiquotation 2016-08-08 09:28:17 -05:00
Wout Mertens db8401f603 Merge pull request #17100 from abbradar/resume-delay
nixos stage-1: wait for resume devices to appear
2016-08-08 11:34:38 +02:00
Nikolay Amiantov 986a40421a nixos stage-1: wait for devices during resumption attempt
Also a microimprovement -- use `test -n` instead of `test -e`
since we have already checked that the file exists.
2016-08-08 01:35:43 +03:00
Nikolay Amiantov 3ae468e835 nixos stage-1: move resumption below helper functions' definitions 2016-08-08 01:34:23 +03:00
Nikolay Amiantov 59aa3bb5c8 nixos stage-1: factor device waiting into a function 2016-08-08 01:32:18 +03:00
Tuomas Tynkkynen 2ea72fa9c8 nixos/luksroot: Reference correct output of openssl 2016-08-04 23:12:39 +03:00
Robin Gloster 1f04b4a566 Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-07-21 00:56:43 +00:00
Nikolay Amiantov 3cc54bbad9 Merge pull request #17082 from abbradar/fix-early-kbd
Use new early kbd-setting code in initrd and fix layouts from external packages
2016-07-20 23:52:45 +04:00
Robin Gloster 203846b9de Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-07-19 10:37:02 +00:00
Christian Kauhaus 3530f3f20a systemd: make ctrl-alt-del target configurable. (#16911)
We currently only allow upstream's default of "reboot.target" due to the
way the symlinks are initialized. I made this configurable similar to the
default unit.
2016-07-19 09:42:53 +02:00
Nikolay Amiantov 7bed3d0cb3 nixos stage-1: move keymap handling to kbd module 2016-07-18 23:27:45 +03:00
Nikolay Amiantov 3d69653d6b plymouth service: stop splash screen before a failure prompt 2016-07-18 13:45:37 +03:00
Nikolay Amiantov 7513a1d2f5 plymouth service: update root fs before stage 2 2016-07-18 13:45:37 +03:00
Nikolay Amiantov 9cab592abd plymouth service: style fixes 2016-07-18 13:45:37 +03:00
Nikolay Amiantov 86ad25625f nixos stage-1: add custom pre failure dialog commands 2016-07-18 13:45:37 +03:00
Nikolay Amiantov 193ab8be67 Revert "nixos stage-1: try to quit plymouth if started on failure"
This reverts commit c69c76ca7e.

This patch was messed up during a rebase -- the commit title doesn't match what
it really does at all (it is actually a broken attempt to get LUKS passphrase
prompts in Plymouth).
2016-07-17 15:03:13 +03:00
Robin Gloster 5185bc1773 Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-07-15 14:41:01 +00:00
Nikolay Amiantov 1848bfc92d Merge branch 'plymouth' into staging 2016-07-13 03:54:38 +03:00
Nikolay Amiantov c69c76ca7e nixos stage-1: try to quit plymouth if started on failure 2016-07-12 22:22:29 +03:00
Nikolay Amiantov a2d4235fe1 plymouth service: init 2016-07-12 22:22:29 +03:00
Nikolay Amiantov d3e3e643cb nixos stage-1: set extraUtils variable 2016-07-12 22:22:29 +03:00
Nikolay Amiantov 3508918da2 nixos stage-1: replace udevadm in udevRules 2016-07-12 22:22:28 +03:00
Nikolay Amiantov e02b5ace0b nixos stage-1: guard udevRules from extra references 2016-07-12 22:22:28 +03:00
Nikolay Amiantov bd0ab027c1 nixos stage-1: recursively process binaries and libraries 2016-07-12 22:22:28 +03:00
Nikolay Amiantov 90ad879753 nixos stage-1: unconditionally mount /dev/pts 2016-07-12 22:22:28 +03:00
Bjørn Forsman 2eb8aab42c nixos/systemd: disable timer units with service
A disabled systemd service with a "startAt" attribute, like this:

  systemd.services.foo-service = {
    enable = false;
    startAt = "*-*-* 05:15:00";
    ...
  };

will cause the following errors in the system journal:

  systemd[1]: foo-service.timer: Refusing to start, unit to trigger not loaded.
  systemd[1]: Failed to start foo-service.timer.

Fix it by not generating the corresponding timer unit when the service
is disabled.
2016-07-11 22:42:47 +02:00
Jookia b187c869f4 systemd-coredump: Add systemd service and fix sysctl pattern. 2016-07-10 18:07:37 +10:00
Tuomas Tynkkynen 931706cdc1 extlinux-conf-builder: Choose whether to use DTBs on per-generation basis
Previously, the value from stdenv.platform.kernelDTB was used. That
doesn't work well if both kinds (DTB and non-DTB) of generations exist
in the system profile.
2016-07-10 03:03:51 +03:00
Bjørn Forsman aeb516c741 nixos/grub: change state file device separator from ':' to ','
':' is currently used as separator in /boot/grub/state for the list of
devices GRUB should be installed to. The problem is that ':' itself may
appear in a device path:

  /dev/disk/by-id/usb-SanDisk_Cruzer_20043512300546C0B317-0:0

With such a path, NixOS will install GRUB *every* time, because it
thinks the configuration differs from the state file (due to the wrong
list split). Fix it by using ',' as separator.

For existing systems with GRUB installed on multiple devices, this
change means that GRUB will be installed one extra time.
2016-07-06 00:11:57 +02:00
Guillaume Maudoux 86dfaafad2 systemd-logind: reload when logind.conf changed 2016-07-03 00:38:37 +02:00
Alexander Ried a31e07fc11 modules.resolved: Enhance by upstream options (#15897) 2016-06-26 22:58:04 +02:00
Eelco Dolstra d0b2524633 Merge pull request #16021 from Baughn/systemd-linger
systemd: Set KillUserProcesses=no in logind.conf
2016-06-20 14:54:03 +02:00
Robin Gloster 8031cba2ab Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-06-10 09:27:04 +00:00
Svein Ove Aas 93c160fabc systemd: Set KillUserProcesses=no in logind.conf
Full discussion at
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=825394

NixOS is even more of a server OS than Debian, and I can think of no
reason to make users jump through this sort of hoop.
2016-06-06 11:51:51 +01:00
Shea Levy 83c2629f15 Merge pull request #15895 from cerana/stage2-sysfs
stage2: if no /proc, also mount /sys
2016-06-03 11:32:57 -04:00
Nahum Shalman 9b0a5ced13 stage2: if no /proc, also mount /sys 2016-06-01 13:26:14 +00:00
Eelco Dolstra e8ad22be12 Rename gummiboot module 2016-06-01 12:55:56 +02:00
Eelco Dolstra 9f0e137338 Rename boot.loader.gummiboot.enable -> boot.loader.systemd-boot.enable 2016-06-01 12:55:52 +02:00
Eelco Dolstra f222689aba Use systemd-boot instead of gummiboot
Gummiboot is part of systemd now so we may as well use it.
2016-05-31 17:02:47 +02:00
Robin Gloster 2d382f3d98 Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-05-30 19:39:34 +00:00
Profpatsch 16c923cef2 modules/mkRemovedOptionModule: add replacement doc
When displaying a warning about a removed Option we should always
include reasoning why it was removed and how to get the same
functionality without it.

Introduces such a description argument and patches occurences (mostly
with an empty string).

startGnuPGAgent: further notes on replacement
2016-05-29 00:42:08 +02:00
Vladimír Čunát 81039713fa Merge branch 'master' into staging
... to get the systemd update (rebuilding ~7k jobs).
2016-05-26 16:50:22 +02:00
Eelco Dolstra 845c9b50bf boot.initrd.luks.devices: Change into an attribute set
This allows setting options for the same LUKS device in different
modules. For example, the auto-generated hardware-configuration.nix
can contain

  boot.initrd.luks.devices.crypted.device = "/dev/disk/...";

while configuration.nix can add

  boot.initrd.luks.devices.crypted.allowDiscards = true;

Also updated the examples/docs to use /disk/disk/by-uuid instead of
/dev/sda, since we shouldn't promote the use of the latter.
2016-05-25 18:04:21 +02:00
Eelco Dolstra 32bed83b18 Remove boot.loader.grub.timeout and boot.loader.gummiboot.timeout
There is a generic boot.loader.timeout option.
2016-05-25 11:39:17 +02:00
Eelco Dolstra 0c5ebbd744 Merge pull request #15598 from rnhmjoj/systemd
Remove systemd shell aliases
2016-05-23 10:28:34 +02:00
Vladimír Čunát 0b192a0976 Merge branch 'master' into staging
That's to get mesa rebuild from master, as it's nontrivial.
2016-05-23 09:02:10 +02:00
rnhmjoj 1d9651e723
Remove systemd shell aliases 2016-05-21 19:25:21 +02:00
Nikolay Amiantov 53b8852498 initrd-ssh service: add assertions for host keys 2016-05-20 23:34:28 +03:00
Tuomas Tynkkynen 2a73de6e6c treewide: Make explicit that 'dev' output of openssl is used 2016-05-19 10:02:23 +02:00
Franz Pletz f8d481754c
Merge remote-tracking branch 'origin/master' into hardened-stdenv 2016-05-18 17:10:02 +02:00
Vladimír Čunát 65a9fa8cdc Merge branch 'master' into staging 2016-05-08 21:24:48 +02:00
Nikolay Amiantov 17e4803de7 initrd-ssh service: fix build 2016-05-07 15:38:46 +03:00
aszlig 67223ee205
nixos/stage-1: Don't kill kernel threads
Unfortunately, pkill doesn't distinguish between kernel and user space
processes, so we need to make sure we don't accidentally kill kernel
threads.

Normally, a kernel thread ignores all signals, but there are a few that
do. A quick grep on the kernel source tree (as of kernel 4.6.0) shows
the following source files which use allow_signal():

  drivers/isdn/mISDN/l1oip_core.c
  drivers/md/md.c
  drivers/misc/mic/cosm/cosm_scif_server.c
  drivers/misc/mic/cosm_client/cosm_scif_client.c
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  drivers/staging/rtl8188eu/core/rtw_cmd.c
  drivers/staging/rtl8712/rtl8712_cmd.c
  drivers/target/iscsi/iscsi_target.c
  drivers/target/iscsi/iscsi_target_login.c
  drivers/target/iscsi/iscsi_target_nego.c
  drivers/usb/atm/usbatm.c
  drivers/usb/gadget/function/f_mass_storage.c
  fs/jffs2/background.c
  fs/lockd/clntlock.c
  fs/lockd/svc.c
  fs/nfs/nfs4state.c
  fs/nfsd/nfssvc.c

While not all of these are necessarily kthreads and some functionality
may still be unimpeded, it's still quite harmful and can cause
unexpected side-effects, especially because some of these kthreads are
storage-related (which we obviously don't want to kill during bootup).

During discussion at #15226, @dezgeg suggested the following
implementation:

for pid in $(pgrep -v -f '@'); do
    if [ "$(cat /proc/$pid/cmdline)" != "" ]; then
        kill -9 "$pid"
    fi
done

This has a few downsides:

 * User space processes which use an empty string in their command line
   won't be killed.
 * It results in errors during bootup because some shell-related
   processes are already terminated (maybe it's pgrep itself, haven't
   checked).
 * The @ is searched within the full command line, not just at the
   beginning of the string. Of course, we already had this until now, so
   it's not a problem of his implementation.

I posted an alternative implementation which doesn't suffer from the
first point, but even that one wasn't sufficient:

for pid in $(pgrep -v -f '^@'); do
    readlink "/proc/$pid/exe" &> /dev/null || continue
    echo "$pid"
done | xargs kill -9

This one spawns a subshell, which would be included in the processes to
kill and actually kills itself during the process.

So what we have now is even checking whether the shell process itself is
in the list to kill and avoids killing it just to be sure.

Also, we don't spawn a subshell anymore and use /proc/$pid/exe to
distinguish between user space and kernel processes like in the comments
of the following StackOverflow answer:

http://stackoverflow.com/a/12231039

We don't need to take care of terminating processes, because what we
actually want IS to terminate the processes.

The only point where this (and any previous) approach falls short if we
have processes that act like fork bombs, because they might spawn
additional processes between the pgrep and the killing. We can only
address this with process/control groups and this still won't save us
because the root user can escape from that as well.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #15226
2016-05-06 16:24:42 +02:00
Robin Gloster c92bca56f8 Merge remote-tracking branch 'upstream/master' into hardened-stdenv 2016-05-02 22:58:02 +00:00
William A. Kennington III 60b3484928 dbus: Fix for new 1.10 version
(cherry picked from commit 68a4a6df3971d66aa988bba680351a30fbadbed3)
2016-05-02 13:04:20 -05:00
Nikolay Amiantov 5f19542581 Merge commit 'refs/pull/14694/head' of git://github.com/NixOS/nixpkgs into staging 2016-04-25 18:02:23 +03:00
Tuomas Tynkkynen 1d4b21ef42 treewide: Use correct output of config.nix.package in non-string contexts 2016-04-25 16:44:38 +02:00
Nikolay Amiantov ab0a0c004e makeSearchPathOutputs: refactor to makeSearchPathOutput 2016-04-25 13:24:39 +03:00