Commit graph

465 commits

Author SHA1 Message Date
Joachim Fasting 15da23d5c1
nixos/modules: use defaultText/literalExample where applicable
Primarily to fix rendering of default values/examples but also
to avoid unnecessary work.
2017-03-07 14:06:08 +01:00
Bjørn Forsman 316e7d6764 nixos/nix-daemon: doc: use literalExample
Makes the example more readable by not squashed everything onto one
single line.
2017-03-05 14:07:23 +01:00
Eelco Dolstra 3971876585
nix-daemon: Remove a bunch of unnecessary environment variables 2017-03-03 16:50:37 +01:00
Eelco Dolstra 3070c88798
Fix incorrect $NIX_BUILD_HOOK on Nix 1.12 2017-03-03 16:50:26 +01:00
Nikolay Amiantov 2e80b50a7e cura, curaengine: 14.04 -> 2.4.0
Move old Cura to {cura,curaengine}_stable
2017-03-01 02:23:18 +03:00
Dan Peebles 8def08a56c apache-kafka.service: pass in log4j config more explicitly
The implicit behavior of pulling it out of the classpath seemed not
to work properly and could be thrown off by other things on the
classpath also providing the properties file. This guarantees that
our settings stick.
2017-02-27 18:32:12 +00:00
aszlig 08881b8cbe
taskserver: Remove taskserver from systemPackages
This is deliberate because using the taskd binary to configure
Taskserver has a good chance of messing up permissions.

The nixos-taskserver tool now can manage even manual configurations, so
there really is no need anymore to expose the taskd binary.

If people still want to use the taskd binary at their own risk they can
still add taskserver to systemPackages themselves.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-02-17 19:46:05 +01:00
aszlig c7bbb93878
taskserver: Pass configuration via command line
Putting an include directive in the configuration file referencing a
store path with the real configuration file has the disavantage that
once we change the real configuration file the store path is also a
different one.

So we would have to replace that include directive with the new
configuration file, which is very much error-prone, because whenever
taskd modifies the configuration file on its own it generates a new one
with *only* the key/value options and without any include directives.

Another problem is that we only added the include directive on the first
initalization, so whenever there is *any* configuration change, it won't
affect anything.

We're now passing all the configuration options via command line,
because taskd treats everything in the form of --<name>=<value> to be a
configuration directive.

This also has the effect that we now no longer have extraConfig, because
configuration isn't a file anymore.

Instead we now have an attribute set that is mapped down to
configuration options.

Unfortunately this isn't so easy with the way taskd is configured,
because there is an option called "server" and also other options like
"server.cert", "server.key" and so on, which do not map very well to
attribute sets.

So we have an exception for the "server" option, which is now called
"server.listen", because it specifies the listening address.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #22705
2017-02-17 19:45:58 +01:00
aszlig 78fe00da7c
taskserver: Allow helper tool in manual config
The helper tool so far was only intended for use in automatic PKI
handling, but it also is very useful if you have an existing CA.

One of the main advantages is that you don't need to specify the data
directory anymore and the right permissions are also handled as well.

Another advantage is that we now have an uniform management tool for
both automatic and manual config, so the documentation in the NixOS
manual now applies to the manual PKI config as well.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-02-17 19:45:55 +01:00
aszlig 32c2e8f4ae
taskserver/helpertool: Fix error message on export
The error message displays that a specific user doesn't exist in an
organisation, but uses the User object's name attribute to show which
user it was.

This is basically a very stupid chicken and egg problem and easily fixed
by using the user name provided on the command line.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-02-17 19:45:52 +01:00
Bjørn Forsman d4e5bb34b7 nixos/geoip-updater: run as user 'geoip' instead of 'nobody'
That way 'nobody' is prevented from messing with the databases.
2017-02-15 23:25:27 +01:00
Graham Christensen 7483ba0932
Revert "nix-daemon: default useSandbox to true"
This reverts commit d0a086770a.
2017-02-14 14:13:39 -05:00
Graham Christensen d0a086770a
nix-daemon: default useSandbox to true 2017-02-13 18:06:01 -05:00
Dan Peebles e928cb1c63 ssm-agent NixOS module: init 2017-02-13 04:01:38 +00:00
Franz Pletz f5a82e4714
gitlab service: fix database creation
Providing custom a username and database name was broken. They were
hardcoded to "gitlab".
2017-02-13 00:57:22 +01:00
Bjørn Forsman 824d82fa0f nixos/geoip-updater: new service
The GeoIP databases from MaxMind have no stable URLs and change every
month (or so). Our current method of packaging these database in Nix and
playing catch-up with ever-changing file hashes is a bad idea. For
instance, it makes it impossible to realize old NixOS configurations.

This patch adds a NixOS service that periodically updates the GeoIP
databases in /var/lib/geoip-databases. Moving NixOS modules over can be
done in later patches.

I tried adding MD5 check, but not all databases have them, so i skipped
it. We are downloading over HTTPS though, it should be good. I also
tried adding zip support, but the first zip file I extracted had a
different filename inside than the archive name, which breaks an
assumption in this service, so I skipped that too.

Changes v9 -> v10:
  - Pass "--max-time" to curl to set upper bound on downloads (ensures
    no indefinite hanging if there's problem with networking).
    Timeout for network connectivity check: 60s.
    Timeout for geoip database (each): 15m.

Changes v8 -> v9:
  - Mention the random timer delay in the documentation for the
    'interval' option.

Changes v7 -> v8:
  - Add "RemainAfterExit=true" for the setup service, so it won't be
    restarted needlessly. (Thanks @danbst!)

Changes v6 -> v7:
  - Add --skip-existing flag to geoip-updater, which skips updating
    existing database files. Pass that flag when we run the service on
    boot (and on any NixOS configuration change).
    (IMHO, this is somewhat a workaround for systemd persistent timers
    not being triggered immediately when a timer has never expired
    before. But it does have the nice side effect of ensuring that the
    installed databases always correspond to the configured ones, since
    the service is now always run after configuration changes.)

Changes v5 -> v6:
  - Update database files atomically (per DB)
  - If a database is removed from the configuration, it'll be removed
    from /var/lib/geoip-databases too (on next run).
  - Add NixOS module assertion so that if user inputs non- .gz or .xz
    file there will be a build time error instead of runtime.
  - Run updater as user "nobody" instead of "root".
  - Rename NixOS service from "geoip-databases" to "geoip-updater".
  - Drop RemainAfterExit, or else the timer won't trigger the unit.
  - Bring back "curl --fail", or else we won't catch and log curl
    failures.

Changes v4 -> v5:
  - Add "GeoLite2-City.mmdb.gz" to default database list.

Changes v3 -> v4:
  - Remove unneeded geoip-updater-setup.service after adding
    'wantedBy = [ "multi-user.target" ]' directly to
    geoip-updater.service
  - Drop unneeded "Service" name from service descriptions.

Changes v2 -> v3:
  - Network may be down when starting from a cold boot, so try a few
    times. Possibly, if using systemd-networkd, it'll pass on the first
    try. But with default DHCP on NixOS, the service is started before
    hostnames can be resolved and thus we need a few extra seconds.
  - Add error handling and mark service as failed if fatal error.
  - Add proper syslog log levels.
  - Add RandomizedDelaySec=3600 to the timer to not put high load on the
    MaxMind servers. Suggested by @Mic92.
  - Set RemainAfterExit on geoip-updater.service instead of
    geoip-updater-setup.service. (The latter is only a proxy that pulls
    in the former service).

Changes v1 -> v2:
From Данило Глинський (Danylo Hlynskyi) <abcz2.uprola@gmail.com>:
  nixos/geoip-databases: add `databases` option and fix initial setup

  There were two great issues when using this service:
  - When you just enable service, databases aren't downloaded, they are
    downloaded when timer triggers. Fixed this with automatic download on
    first system activation.
  - When there is no internet, updater outputs nothing to logs, which is
    IMO misbehavior. Fixed this with removing `--fail` option, better be
    explicit here.
2017-02-12 15:07:34 +01:00
Peter Simons bfd7fe8ba5 nixos: fix taskserver module to evaluate properly when keys are managed manually 2017-02-07 18:35:41 +01:00
Tim Jaeger 83241c091d
gogs: fix error on push
Pushing to gogs only works if the `gogs` user's shell is `bash`. For error and
solution, refer to [this SO thread](http://stackoverflow.com/a/22315659)
2017-02-04 12:16:37 +01:00
Peter Simons 10349e72b9 nixos: drop unused 'haskellPackages' option from ihaskell service
Closes https://github.com/NixOS/nixpkgs/issues/19039.
2017-01-31 22:38:01 +01:00
Dan Peebles eebee95176 apache-kafka service: change default brokerId to -1
A default of 0 means that if you deploy two NixOS boxes with the default
configuration, the second will fail because the brokerId was already in
use. Using -1 instead tells it to pick one automatically at first start.
2017-01-24 12:32:22 -05:00
Charles Strahan d298a961f1 Merge pull request #21416 from cstrahan/mesos-1.1.0
mesos: 1.0.1 -> 1.1.0
2017-01-21 19:05:18 -05:00
schneefux 67c4512060
gogs service: init 2017-01-21 13:38:24 +01:00
Tristan Helmich e5f353d5cd couchpotato module: init 2017-01-16 12:54:43 +01:00
Alexander Kahl 61d125b842 sssd: init at 1.14.2
perlPackages.TextWrapI18N: init at 0.06
perlPackages.Po4a: init at 0.47
jade: init at 1.2.1
ding-libs: init at 0.6.0

Switch nscd to no-caching mode if SSSD is enabled.

abbradar: disable jade parallel building.

Closes #21150
2017-01-04 03:07:20 +03:00
Chris Martin 6a7664e6cd Add some more details about useSandbox 2017-01-03 14:24:49 -05:00
Charles Strahan 7ebcada020
mesos: 1.0.1 -> 1.1.0 2016-12-29 20:09:46 -05:00
Jörg Thalheim f4e58c2eb2 Merge pull request #21395 from jerith666/plex-firewall
plex: add config option to open recommended network ports
2016-12-24 23:31:04 +01:00
Matt McHenry b64214f66f plex: add config option to open recommended network ports
as prescribed at https://support.plex.tv/hc/en-us/articles/201543147-What-network-ports-do-I-need-to-allow-through-my-firewall-
2016-12-24 15:36:52 -05:00
Matt McHenry 3c10e68c40
plex: fix a minor syntax issue in systemd ExecStart 2016-12-23 08:02:08 -05:00
Franz Pletz 3000ae8602
gitlab service: fix sidekiq queue config 2016-11-29 17:42:46 +01:00
Ruben Maher 9c9a21d525 matrix-synapse service: Make url_preview_enabled optional (#20609) 2016-11-28 03:33:48 +01:00
Joachim Fasting f9f354faad
nixos/modules: use defaultText where applicable
Primarily to fix rendering of these default values in the manual but
it's also nice to avoid having to eval these things just to build the
manual.
2016-11-21 16:35:15 +01:00
Nikolay Amiantov 6bb292d42b parsoid service: update, use declarative configuration
Old configuration format is disabled now (it can still be used, but with
additional steps). This is a backwards incompatible change.
2016-11-20 19:12:14 +03:00
Michael Stapelberg 9cbf8a0652 Fix buildMachines example: use lists, not string (#20361)
Using the example before this commit resulted in the following error:

```
error: value is a string while a list was expected, at /nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/nixos/modules/services/misc/nix-daemon.nix:349:37
```
2016-11-15 07:04:32 +01:00
Robin Gloster f422afd07d
errbot service: fix import config in plugins 2016-11-08 17:44:52 +01:00
Joachim Schiele 47d81ed347 leaps: 0.5.1 + add a service + test 2016-11-06 10:34:42 +01:00
Eric Sagnes 1fe1cdecb2 types: loeOf -> listOf 2016-11-05 21:46:42 +01:00
Nikolay Amiantov 5187c28f91 parsoid service: don't run as a superuser 2016-11-03 19:20:19 +03:00
Nikolay Amiantov 0fa07f1b20 parsoid service: fix for new parsoid 2016-11-03 19:20:19 +03:00
Ruben Maher 08d7fbb42d
matrix-synapse: Allow keys to be generated
The matrix-synapse user has `createHome = true;` which runs before the
`preStart` script, so the home directory will always exist and the block
will never execute.

Also don't include default path to keys in the configuration file,
because synapse will choke if it tries to open them before they
exist (even with `--generate-keys`).
2016-11-02 10:10:46 +01:00
Edward Tjörnhammar f7ad0c0fd5 Merge pull request #19675 from edwtjo/dictd-touchup
Dictd touchup
2016-10-31 13:08:57 +01:00
Joachim F bdc4397303 Merge pull request #19805 from joachifm/startAt-fixups
Fixup remaining uses of startAt
2016-10-23 20:39:53 +02:00
Emery Hemingway 7c6a4e6c35 nixos/octoprint: fixup extraConfig 2016-10-23 19:47:28 +02:00
Emery Hemingway b675619391 nixos: use types.lines for extraConfig 2016-10-23 19:41:43 +02:00
Joachim Fasting 4c41c412a0
nix gc service: fix use of startAt
`startAt = ""` as in `startAt = optionalString false ...` results
in an invalid timer unit (due to "" being promoted to a singleton
list and not filtered out).

Ref: c9941c4b5e
2016-10-23 17:56:49 +02:00
Joachim F 858f54dd88 Merge pull request #19664 from eqyiel/revert-19591-master
Revert "matrix-synapse: Pass required --report-stats opt"
2016-10-21 01:47:12 +02:00
Tim Steinbach 99d9d32899 Merge pull request #19668 from groxxda/timers
systemd.timers: automatically convert string to list
2016-10-20 17:37:28 -04:00
Robin Gloster c2eb39faba
gitlab: start sidekiq when starting gitlab 2016-10-20 11:18:21 +02:00
Edward Tjörnhammar eacb020a0c
nixos: dictd, make wiktionary and wordnet default dicts 2016-10-19 08:43:30 +02:00
Edward Tjörnhammar 642366d103
nixos: dictd config location; bind to cfg 2016-10-19 08:43:30 +02:00