Commit graph

865 commits

Author SHA1 Message Date
Vincent Demeester 46b00e0b15
Update runc to 1.0.0-rc3
- Fix compilation problems
- Remove patches as those are included in the sources now

Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-06-10 18:05:57 +02:00
Graham Christensen 7d8218a351 Merge pull request #26489 from michalpalka/xen-security
xen: patch for XSAs: 206, 211, 212, 213, 214 and 215
2017-06-09 09:31:42 -04:00
Michał Pałka dd3dcceb23 xen: patch for XSAs: 206, 211, 212, 213, 214 and 215
XSA-206 Issue Description:

> xenstored supports transactions, such that if writes which would
> invalidate assumptions of a transaction occur, the entire transaction
> fails.  Typical response on a failed transaction is to simply retry
> the transaction until it succeeds.
>
> Unprivileged domains may issue writes to xenstore which conflict with
> transactions either of the toolstack or of backends such as the driver
> domain. Depending on the exact timing, repeated writes may cause
> transactions made by these entities to fail indefinitely.

More: https://xenbits.xen.org/xsa/advisory-206.html

XSA-211 Issue Description:

> When a graphics update command gets passed to the VGA emulator, there
> are 3 possible modes that can be used to update the display:
>
> * blank - Clears the display
> * text - Treats the display as showing text
> * graph - Treats the display as showing graphics
>
> After the display geometry gets changed (i.e., after the CIRRUS VGA
> emulation has resized the display), the VGA emulator will resize the
> console during the next update command. However, when a blank mode is
> also selected during an update, this resize doesn't happen. The resize
> will be properly handled during the next time a non-blank mode is
> selected during an update.
>
> However, other console components - such as the VNC emulation - will
> operate as though this resize had happened. When the display is
> resized to be larger than before, this can result in a heap overflow
> as console components will expect the display buffer to be larger than
> it is currently allocated.

More: https://xenbits.xen.org/xsa/advisory-211.html

XSA-212 Issue Description:

> The XSA-29 fix introduced an insufficient check on XENMEM_exchange
> input, allowing the caller to drive hypervisor memory accesses outside
> of the guest provided input/output arrays.

More: https://xenbits.xen.org/xsa/advisory-212.html

XSA-213 Issue Description:

> 64-bit PV guests typically use separate (root) page tables for their
> kernel and user modes.  Hypercalls are accessible to guest kernel
> context only, which certain hypercall handlers make assumptions on.
> The IRET hypercall (replacing the identically name CPU instruction)
> is used by guest kernels to transfer control from kernel mode to user
> mode.  If such an IRET hypercall is placed in the middle of a multicall
> batch, subsequent operations invoked by the same multicall batch may
> wrongly assume the guest to still be in kernel mode.  If one or more of
> these subsequent operations involve operations on page tables, they may
> be using the wrong root page table, confusing internal accounting.  As
> a result the guest may gain writable access to some of its page tables.

More: https://xenbits.xen.org/xsa/advisory-213.html

XSA-214 Issue Description:

> The GNTTABOP_transfer operation allows one guest to transfer a page to
> another guest.  The internal processing of this, however, does not
> include zapping the previous type of the page being transferred.  This
> makes it possible for a PV guest to transfer a page previously used as
> part of a segment descriptor table to another guest while retaining the
> "contains segment descriptors" property.
>
> If the destination guest is a PV one of different bitness, it may gain
> access to segment descriptors it is not normally allowed to have, like
> 64-bit code segments in a 32-bit PV guest.
>
> If the destination guest is a HVM one, that guest may freely alter the
> page contents and then hand the page back to the same or another PV
> guest.
>
> In either case, if the destination PV guest then inserts that page into
> one of its own descriptor tables, the page still having the designated
> type results in validation of its contents being skipped.

More: https://xenbits.xen.org/xsa/advisory-214.html

XSA-215 Issue Description:

> Under certain special conditions Xen reports an exception resulting
> from returning to guest mode not via ordinary exception entry points,
> but via a so call failsafe callback.  This callback, unlike exception
> handlers, takes 4 extra arguments on the stack (the saved data
> selectors DS, ES, FS, and GS).  Prior to placing exception or failsafe
> callback frames on the guest kernel stack, Xen checks the linear
> address range to not overlap with hypervisor space.  The range spanned
> by that check was mistakenly not covering these extra 4 slots.

More: https://xenbits.xen.org/xsa/advisory-215.html
2017-06-09 13:09:01 +00:00
Vladimír Čunát cc9a72a286
virtualboxGuestAdditions: don't install setuid/setgid 2017-06-09 13:09:21 +02:00
Michał Pałka 965668903a xen: fix pygrub by making sure it is wrapped
Recent commit #c10af9e744c91dff1ccc07a52a0b57d1e4d339f3 changed the
behaviour of wrapPythonPrograms, which caused pygrub to no longer
being wrapped. This commit fixes this.
2017-06-09 06:22:03 +00:00
midchildan 7060a692c5
virtmanager: Fix python import error 2017-06-05 23:42:25 +09:00
Robin Gloster 13f2f8673b
OVMF: fix build
$fd for the output was overwritten during the build
2017-05-29 12:21:17 +02:00
Tim Steinbach 9237459d60
rkt: 1.25.0 -> 1.26.0 2017-05-25 18:13:54 -04:00
Joachim Fasting 49ecd62c08
lkl: split outputs
Breaking out lib allows users to link against lkl without pulling the
kitchen sink into their closure.
2017-05-24 01:07:26 +02:00
Joachim Fasting e0b623a56d
lkl: break description into longDescription and a briefer descr 2017-05-24 01:07:24 +02:00
Joachim Fasting 8c8f40a128
lkl: d747073 -> 2017-03-24
- Moves to a more recent kernel (4.10, I think ...)
- API break re the previous version
- cptofs: fix root directory copy
- add support for disks with custom ops
- add LKL_HIJACK_NET_QDISC to configure qdisc policy
- add LKL_HIJACK_SYSCTL to configure sysctl values
2017-05-24 01:07:23 +02:00
Joachim Fasting e983d4306e
lkl: bc & python are native build inputs 2017-05-24 01:07:22 +02:00
Joachim Fasting e845495edb
lkl: add meta.homepage 2017-05-24 01:07:14 +02:00
Peter Hoeg 5b45342832 virtmanager-qt: 0.43.70 -> 0.43.70.2 2017-05-23 17:54:20 +08:00
Joachim F 07ceaa2ec8 Merge pull request #25896 from joachifm/ovmf
ovmf: split firmware image files
2017-05-21 14:48:29 +01:00
Joachim Fasting 874b81b31f
treewide: s,enableParallelBuild(s),enableParallelBuilding,g 2017-05-20 17:16:17 +02:00
Joachim Fasting 252dcd62f3
OVMF: separate output for ovmf binaries
OVMF{,CODE,VARS}.fd are now available in a dedicated fd output, greatly
reducing the closure in the common case where only those files are used (a
few MBs versus several hundred MBs for the full OVMF).

Note: it's unclear why `dontPatchELF` is now necessary for the build to
pass (on my end, at any rate) but it doesn't make much sense to run this
fixup anyway,

Note: my reading of xen's INSTALL suggests that --with-system-ovmf should
point directly to the OVMF binary.  As such, the previous invocation was
incorrect (it pointed to the root of the OVMF tree).  In any case, I have
only built xen with `--with-system-ovmf`, I have not tested it.

Fixes https://github.com/NixOS/nixpkgs/issues/25854
Closes https://github.com/NixOS/nixpkgs/pull/25855
2017-05-20 12:33:48 +02:00
Jörg Thalheim 618f9aa52c
docker-proxy: remove go references
related to #25861
2017-05-17 22:14:34 +01:00
Peter Hoeg 68f335c6cd virtmanager-qt: 0.42.67 -> 0.43.70 2017-05-14 11:21:51 +08:00
Vincent Demeester 398f6ed7d3
docker-edge: 17.04 to 17.05
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-05-09 10:11:05 +02:00
Frederik Rietdijk ef4442e827 Python: replace requests2 with requests tree-wide
See f63eb58573

The `requests2` attribute now throws an error informing that `requests`
should be used instead.
2017-05-07 12:56:09 +02:00
Olegs Jeremejevs 670afd010c virt-manager: add requests as dependency 2017-05-07 12:15:19 +03:00
Frederik Rietdijk 95534bc4ee virtinst: do not depend on glanceclient
because its not a dependency and because its broken.
2017-05-07 10:02:33 +02:00
Frederik Rietdijk e184e02e7a virt-manager: do not depend on glanceclient
because its not a dependency and because its broken.
2017-05-07 10:01:47 +02:00
Pascal Bach c4a48600bf virtualbox: 5.1.18 -> 5.1.22 2017-04-30 22:55:23 +02:00
Michał Pałka 7c918ff7d4 virtualisation-xen: Fix xendomains startup
* Revert to using bash, not sh for the xendomains script to avoid syntax error
* Rewrite /bin/ls to ls in the xendomains script
2017-04-27 07:55:34 +00:00
Bjørn Forsman ddb788b671 OVMF: get version number from edk2
OVMF is built from edk2 sources so that's where its version number comes
from (logically). The edk2 version number is 2014-12-10, so this change
only ensures the version numbers won't drift apart in the future. (There
is no hash change.)
2017-04-23 19:28:34 +02:00
Volth 1931ad0e2c qemu: 2.8.1 -> 2.9.0 2017-04-23 14:20:48 +02:00
Michael Raskin f45f2fb67a Merge pull request #24549 from volth/qemu-2.8.1
qemu: 2.8.0 -> 2.8.1
2017-04-23 11:07:44 +02:00
Tim Steinbach d95fb5f2ac Merge pull request #24632 from NeQuissimus/docker_17_04
docker-edge: init at 17.04
2017-04-05 20:51:14 -04:00
Tim Steinbach 1e589239b3
docker-edge: init at 17.04 2017-04-05 20:49:26 -04:00
Tim Steinbach 89188e2972
docker-distribution: 2.5.1 -> 2.6.0 2017-04-04 21:01:27 -04:00
Tim Steinbach aefb9671bf
docker: 17.03.0 -> 17.03.1 2017-04-04 13:43:57 -04:00
Volth 160a84013e qemu: 2.8.0 -> 2.8.1 2017-04-02 00:21:56 +00:00
Franz Pletz 0018cd5a2d
libvirt packages: fix & clean up dependencies 2017-03-28 19:45:01 +02:00
Kosyrev Serge 0c3138e602 virtualbox: a more maintenance-free way of patching refs to dlopen()-affected dependencies 2017-03-28 01:32:11 +03:00
Nikolay Amiantov 52451067c7 virtualbox: wrap with Qt dependencies
Fixes GTK file open dialogs. Also make sure that linked applications really
exist, and update their list.
2017-03-28 00:29:40 +03:00
Franz Pletz 160fd7231e
virt-manager: needs file for building translations 2017-03-25 14:57:45 +01:00
volth 4e749683e6 virt-manager: 1.4.0 -> 1.4.1 (#24149) 2017-03-21 10:20:55 +01:00
Robin Gloster 07252dc83b
virtualbox: 5.1.14 -> 5.1.18 2017-03-20 16:05:20 +01:00
Michael Raskin dfbd2dd659 Merge pull request #23624 from volth/virt-viewer-5.0
virt-viewer: 2.0 -> 5.0
2017-03-18 19:05:11 +01:00
Peter Hoeg ee20e89644 virtmanager-qt: 0.39.60 -> 0.42.67 2017-03-18 12:32:49 +08:00
Tim Steinbach f1c2d047ed Merge pull request #23872 from NeQuissimus/docker_17_03_0
docker: 1.13.1 -> 17.03.0-ce
2017-03-17 10:07:04 -04:00
Dan Peebles dc61ff31a7 xhyve: update and fix to use our Hypervisor framework
(this is a cherry-picked version of f3b65f67d9,
which got reverted because it depended on my 10.11 frameworks, which were
flawed)
2017-03-14 22:38:35 -04:00
Tim Steinbach aed4918795
docker: 1.13.1 -> 17.03.0-ce 2017-03-14 08:02:35 -04:00
Volth d4294265fd virt-viewer: 2.0 -> 5.0 2017-03-14 04:54:11 +00:00
Joachim Fasting d082a29c3a
runc: use removeReferencesTo 2017-03-11 15:17:36 +01:00
Joachim Fasting c4fe196087
docker: use removeReferencesTo 2017-03-11 15:17:34 +01:00
Joachim Fasting 0c6a1eaa43
containerd: use removeReferencesTo 2017-03-11 15:17:32 +01:00
aszlig 0a7673d202
qemu_test: Rebase force-uid0-on-9p.patch
This reverts commit 3a4e2376e4.

The reverted commit caused the fix for CVE-2016-9602 not to be applied
for qemu_test because it conflicts with the force-uid0-on-9p.patch.

So with the rebase of the patch on top of the changes of the
CVE-2016-9602.patch, both patches no longer conflict with each other.

I've tested this with the "misc" NixOS test and it succeeds.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2017-03-11 15:16:49 +01:00
Franz Pletz 3a4e2376e4
qemu_test: don't apply patch for CVE-2016-9602
Both patches are conflicting. Keeping the vulnerability unpatched in qemu
binaries used for nixos test is tolerable.
2017-03-11 13:43:42 +01:00
Franz Pletz 621e7a9945
qemu: fetch vnc bugfix patch from debian
This version of the patch applies cleanly to the 2.8.0 release.
2017-03-11 09:32:48 +01:00
Franz Pletz c512180f9c
qemu: add patches for multiple CVEs
New upstream patch function and patches for fixing a bug in the patch for
CVE-2017-5667 and the following security issues:

  * CVE-2016-7907
  * CVE-2016-9602
  * CVE-2016-10155
  * CVE-2017-2620
  * CVE-2017-2630
  * CVE-2017-5525
  * CVE-2017-5526
  * CVE-2017-5579
  * CVE-2017-5856
  * CVE-2017-5857
  * CVE-2017-5987
  * CVE-2017-6058
2017-03-11 08:14:29 +01:00
Peter Hoeg bce352949e virtmanager-qt: init at 0.39.60 2017-03-10 11:08:19 +08:00
Jan Malakhovski 916fa0a610 xen: rewrite build expression to be more modular, support upstream qemu and seabios
Also:

* provides a bunch of build options
* documents build options config in longDescription
* provides a bunch of predefined packages and documents them some more
* sources' hashes stay the same
2017-03-05 13:59:28 +00:00
Jan Malakhovski 1c8940a2b8 qemu: add xen support 2017-03-05 13:59:28 +00:00
Jan Malakhovski eff9b09fb7 qemu: separate usbredirSupport option out of spiceSupport option 2017-03-05 13:59:28 +00:00
Tuomas Tynkkynen 439facec2a lkl: Broken on i686
http://hydra.nixos.org/build/49534265
2017-03-02 03:59:31 +02:00
Alexey Shmalko 0d31a76813
virtualbox: fix build
The issue was caused by upgrading `qt` from `qt56` to `qt57`, which
now requires C++11.

For more info, see https://github.com/NixOS/nixpkgs/issues/23257.
2017-02-28 05:35:52 +02:00
Franz Pletz 6bafe64a20
qemu: apply patches for multiple CVEs
Fixes:

  * CVE-2017-2615
  * CVE-2017-5667
  * CVE-2017-5898
  * CVE-2017-5931
  * CVE-2017-5973

We are vulnerable to even more CVEs but those are either not severe like
memory leaks in obscure situations or upstream hasn't acknowledged the
patch yet.

cc #23072
2017-02-25 09:40:53 +01:00
Vladimír Čunát 145d3ea81c
Merge branch 'master' into staging 2017-02-22 17:47:49 +01:00
Vladimír Čunát 1d1dc2dcc3
open-vm-tools: fixup build with glibc-2.25 2017-02-22 16:54:07 +01:00
Graham Christensen cc4919da89
xen: patch for XSAs: 197, 199, 207, 208, 209
XSA-197 Issue Description:

> The compiler can emit optimizations in qemu which can lead to double
> fetch vulnerabilities.  Specifically data on the rings shared
> between qemu and the hypervisor (which the guest under control can
> obtain mappings of) can be fetched twice (during which time the
> guest can alter the contents) possibly leading to arbitrary code
> execution in qemu.

More: https://xenbits.xen.org/xsa/advisory-197.html

XSA-199 Issue Description:

> The code in qemu which implements ioport read/write looks up the
> specified ioport address in a dispatch table.  The argument to the
> dispatch function is a uint32_t, and is used without a range check,
> even though the table has entries for only 2^16 ioports.
>
> When qemu is used as a standalone emulator, ioport accesses are
> generated only from cpu instructions emulated by qemu, and are
> therefore necessarily 16-bit, so there is no vulnerability.
>
> When qemu is used as a device model within Xen, io requests are
> generated by the hypervisor and read by qemu from a shared ring.  The
> entries in this ring use a common structure, including a 64-bit
> address field, for various accesses, including ioport addresses.
>
> Xen will write only 16-bit address ioport accesses.  However,
> depending on the Xen and qemu version, the ring may be writeable by
> the guest.  If so, the guest can generate out-of-range ioport
> accesses, resulting in wild pointer accesses within qemu.

More: https://xenbits.xen.org/xsa/advisory-199.html

XSA-207 Issue Description:

> Certain internal state is set up, during domain construction, in
> preparation for possible pass-through device assignment.  On ARM and
> AMD V-i hardware this setup includes memory allocation.  On guest
> teardown, cleanup was erroneously only performed when the guest
> actually had a pass-through device assigned.

More: https://xenbits.xen.org/xsa/advisory-207.html

XSA-209 Issue Description:

> When doing bitblt copy backwards, qemu should negate the blit width.
> This avoids an oob access before the start of video memory.

More: https://xenbits.xen.org/xsa/advisory-208.html

XSA-208 Issue Description:

> In CIRRUS_BLTMODE_MEMSYSSRC mode the bitblit copy routine
> cirrus_bitblt_cputovideo fails to check wethehr the specified memory
> region is safe.

More: https://xenbits.xen.org/xsa/advisory-209.html
2017-02-22 08:00:45 -05:00
Tim Steinbach 8b60413e95
rkt: 1.24.0 -> 1.25.0 2017-02-21 18:51:34 -05:00
Vladimír Čunát 3d600726b3
xen: fixup build with glibc-2.25 2017-02-21 18:26:52 +01:00
Benjamin Staffin b42f820bdc Merge pull request #22745 from vdemeester/docker_1_13_1
docker: 1.13.0 -> 1.13.1
2017-02-14 11:47:40 -05:00
Parnell Springmeyer 9e36a58649
Merging against upstream master 2017-02-13 17:16:28 -06:00
Vincent Demeester a50b4d0e03
docker: 1.13.0 -> 1.13.1
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-02-13 16:42:39 +01:00
Vladimír Čunát 31eba21d1d
virtualbox: force xorg-server-1.18 for now
This is getting a little hacky, but hopefully it won't break anything.
2017-02-12 21:07:49 +01:00
Tuomas Tynkkynen a14ef4ad52 open-vm-tools: 10.0.7 -> 10.1.0
Also add an option to disable all the X11 stuff.
2017-02-10 20:12:00 +02:00
Christoph Hrdinka de9720b65f
aqemu: init at 0.9.2 2017-02-10 12:48:29 +01:00
Dan Peebles 03cab2d923 ecs-agent: init at 1.14.0 2017-02-10 04:33:48 +00:00
Tim Steinbach f65a3515f4
rkt: 1.23.0 -> 1.24.0 2017-02-05 11:51:05 -05:00
volth 762cc106b4 virt-top: init at 1.0.8 (#21536) 2017-02-04 16:07:45 +01:00
Pascal Bach 5ca3a7e56f virtualbox: remove upstream-info.json as it is no longer used
We keep the script as it might be useful in the future.
2017-02-02 21:11:08 +01:00
Pascal Bach 599df5e108 virtualbox: 5.1.10 -> 5.1.14 2017-02-02 21:10:01 +01:00
Eelco Dolstra c20cc6d0b3
Excise use of importJSON
Putting information in external JSON files is IMHO not an improvement
over the idiomatic style of Nix expressions. The use of JSON doesn't
add anything over Nix expressions (in fact it removes expressive
power). And scattering package info over lots of little files makes
packages less readable over having the info in one file.
2017-01-30 11:44:08 +01:00
Parnell Springmeyer 6777e6f812
Merging with upstream 2017-01-29 05:54:01 -06:00
Parnell Springmeyer 4aa0923009
Getting rid of the var indirection and using a bin path instead 2017-01-29 04:11:01 -06:00
Parnell Springmeyer e92b8402b0
Addressing PR feedback 2017-01-28 20:48:03 -08:00
Graham Christensen f46c5b293b
qemu: 2.7 -> 2.8, drop 2.7 2017-01-26 20:23:40 -05:00
Parnell Springmeyer a26a796d5c
Merging against master - updating smokingpig, rebase was going to be messy 2017-01-26 02:00:04 -08:00
Dan Peebles ed83ec1b65 lkl: fix impure reference to /usr/bin/env 2017-01-25 21:30:59 +00:00
Parnell Springmeyer bae00e8aa8
setcap-wrapper: Merging with upstream master and resolving conflicts 2017-01-25 11:08:05 -08:00
Tim Steinbach 6aae00edfc rkt: 1.22.0 -> 1.23.0 2017-01-23 17:56:46 +01:00
Vincent Demeester d79fa8850a
Fixing the wrong Git Commit hash in docker version
`DOCKER_GITCOMMIT` needs to match the tagged commit used to build the
binary. The current commit refers to 1.12.1 and wasn't update each
time we updated the package. Using a variable near the version and
adding a comment so we don't forget to update next time.

Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-01-23 10:32:17 +01:00
Jaka Hudoklin 4884fa4502 Merge pull request #20656 from vdemeester/docker_1_13
Update to docker 1.13.x
2017-01-21 12:19:06 +01:00
Vladimír Čunát 6b6553c768
Merge branch 'staging'
It contains security updates.  I somehow forgot to push this yesterday.
2017-01-20 16:33:59 +01:00
Michael Raskin ac27b9d836 Merge pull request #22001 from nlewo/qemu-cve
Qemu CVEs
2017-01-20 11:28:14 +00:00
Antoine Eiche 9f1514f086 qemu: fix several CVEs
- CVE 2016-9845
- CVE-2016-9846
- CVE-2016-9907
- CVE-2016-9912
2017-01-20 11:09:02 +01:00
Antoine Eiche 0bd3f82a67 qemu: fix the url of patch for CVE-2016-9921 and CVE-2016-9922 2017-01-20 11:02:22 +01:00
Vincent Demeester 74d4d3e4f9
docker: 1.12.6 -> 1.13.0
- Update docker version to 1.13.0.
- Introduce now docker-proxy package (from libnetmork).
- Use overrideDerivation to set the correct version for docker.
- Update tini to make sure we can build it static.

Signed-off-by: Vincent Demeester <vincent@sbr.pm>
2017-01-18 21:33:37 +01:00
Vladimír Čunát 0dc43ab9d6
virt-manager: fixup evaluation to unbreak Hydra
The package itself is probably still broken.  /cc @fridh e94d9cdfaa
2017-01-18 16:07:25 +01:00
Vladimír Čunát 40003aa2ed
Merge branch 'master' into staging 2017-01-18 15:54:04 +01:00
Dan Peebles 3ab26fdb70 lkl: update to d7470730 2017-01-17 18:40:58 +00:00
Dan Peebles f1a9bc356e lkl: init 2017-01-16 21:24:32 +00:00
Tim Steinbach 490c109928
rkt: 1.21.0 -> 1.22.0 2017-01-11 17:27:19 -05:00
Frederik Rietdijk e94d9cdfaa virtmanager: use python2 2017-01-11 18:25:10 +01:00
Franz Pletz 260d97ca25
runc: add patches to fix CVE-2016-9962 2017-01-11 12:11:29 +01:00
Franz Pletz 0aa4931671
runc: 2016-06-15 -> 1.0.0-rc2 2017-01-11 10:59:27 +01:00
Franz Pletz 4df30fc74f
containerd: 0.2.3 -> 0.2.5 2017-01-11 10:59:26 +01:00
Franz Pletz cb07316773
docker: 1.12.5 -> 1.12.6
Fixes CVE-2016-9962.
2017-01-11 10:59:24 +01:00
Graham Christensen f5ca9a4212
Merge branch 'roundup-15' 2016-12-28 21:04:51 -05:00
Antoine Eiche bc63738c6f
qemu: fix CVE-2016-9921 and CVE-2016-9922 2016-12-28 20:37:00 -05:00
Antoine Eiche a5dd311208
qemu: fix CVE-2016-9911 2016-12-28 20:36:53 -05:00
Michael Raskin 442623e499 qemu_28: init at 2.8.0; not updating the main Qemu expression yet because there were some claims about NixOS test fragility 2016-12-28 15:04:51 +01:00
Graham Christensen 4e6c7faf36
xen: patch for many XSAs
- XSA-190
 - XSA-191
 - XSA-192
 - XSA-193
 - XSA-195
 - XSA-196
 - XSA-198
 - XSA-200
 - XSA_202
 - XSA-204
2016-12-21 14:37:47 -05:00
Daiderd Jordan 49e3190efa
Revert "xhyve: update and fix to use our Hypervisor framework"
This reverts commit f3b65f67d9.
2016-12-20 13:02:27 +01:00
Eelco Dolstra 8a0843c3c4
qemu-kvm: Mark the version for tests
(cherry picked from commit d58a4ec1ba77e390c53c09ba6198b78f8568d495)
2016-12-20 10:52:46 +01:00
Dan Peebles f3b65f67d9 xhyve: update and fix to use our Hypervisor framework 2016-12-19 19:47:24 -05:00
aszlig c5e5dccd13
Merge pull request #21201 (VirtualBox 5.1.10)
This brings VirtualBox to the latest upstream version, which also fixes
building the modules against kernel 4.9.0.

Tested against all the the "virtualbox" subtests on x86_64-linux.
2016-12-17 15:46:06 +01:00
Tim Steinbach a5a98290b7
docker: 1.12.3 -> 1.12.5 2016-12-16 08:57:08 -05:00
aszlig 38ea64e867
qemu_test: Make chown() calls to the store a no-op
The "misc" NixOS test is using Nix to query the store and it tries to
change the ownership of it while doing so.

This fails if Nix is not in a seccomp-sandboxed userid namespace, so
let's make chown() a no-op when applied to store paths.

Fixes the misc test (and possibly future tests) on older Nix versions.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2016-12-16 13:06:25 +01:00
Eelco Dolstra 705829b29a Merge pull request #20500 from aszlig/qemu-patched-for-nixos-tests
nixos/tests: Use a patched QEMU for testing
2016-12-15 12:38:29 +01:00
Peter Hoeg bea3209d5f virtualbox: 5.1.8 -> 5.1.10 2016-12-15 16:20:33 +08:00
Tim Steinbach 4f0592680c
rkt: 1.20.0 -> 1.21.0 2016-12-11 21:10:28 -05:00
Graham Christensen a2d6e8a2eb
xen: Fix patch hashes
I had used nix-prefetch-url, where fetchpatch doesn't support it.
2016-12-09 07:22:35 -05:00
Graham Christensen 86da9839b1
xen: Patch for CVE-2016-9385, CVE-2016-9377, and CVE-2016-9378 2016-12-07 20:16:05 -05:00
Tuomas Tynkkynen 8a4d6516ee Merge remote-tracking branch 'upstream/staging' into master 2016-11-30 00:34:23 +02:00
Tim Steinbach e24df8ea69 rkt: 1.19.0 -> 1.20.0 (#20697) 2016-11-26 17:18:00 +00:00
Vladimír Čunát 925b335607
Merge branch 'master' into staging 2016-11-26 11:27:09 +01:00
Frederik Rietdijk 97259c811e qemu: use python2 2016-11-24 22:28:03 +01:00
Franz Pletz 336bacfa1d
qemu: add patch to fix CVE-2016-7907
cc #20647
2016-11-23 23:23:49 -05:00
Bjørn Forsman bbe5f99e0b qemu: add curl to buildInputs
Enables support for accessing files over HTTP:

  qemu-system-x86_64 -drive media=cdrom,file=http://host/path.iso,readonly

Increases the closures size from 445 to 447 MiB.
2016-11-23 17:44:02 +01:00
Vladimír Čunát b69f568f4c
Merge branch 'staging'
Hydra rebuild looks fine; only a few Darwin jobs is queued:
http://hydra.nixos.org/eval/1304891?compare=1304807
2016-11-19 04:35:51 +01:00
Franz Pletz f4a318b528
qemu: add patches for CVE-2016-7994 & CVE-2016-8668 2016-11-17 22:00:44 +01:00
aszlig 6cfb3b6364
nixos/tests: Use a patched QEMU for testing
The reason to patch QEMU is that with latest Nix, tests like "printing"
or "misc" fail because they expect the store paths to be owned by uid 0
and gid 0.

Starting with NixOS/nix@5e51ffb1c2, Nix
builds inside of a new user namespace. Unfortunately this also means
that bind-mounted store paths that are part of the derivation's inputs
are no longer owned by uid 0 and gid 0 but by uid 65534 and gid 65534.

This in turn causes things like sudo or cups to fail with errors about
insecure file permissions.

So in order to avoid that, let's make sure the VM always gets files
owned by uid 0 and gid 0 and does a no-op when doing a chmod on a store
path.

In addition, this adds a virtualisation.qemu.program option so that we
can make sure that we only use the patched version if we're *really*
running NixOS VM tests (that is, whenever we have imported
test-instrumentation.nix).

Tested against the "misc" and "printing" tests.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2016-11-17 17:16:16 +01:00
Vladimír Čunát b5e89fe9bf
Merge branch 'master' into staging 2016-11-15 00:20:19 +01:00
Justin Bedo 04121437be
singularity: init 2.2 2016-11-15 09:11:53 +11:00
Frederik Rietdijk 84e9328028 virtualbox: python is always needed
even when not building bindings.
2016-11-14 19:09:25 +01:00
Tim Steinbach ecd1a53df6
rkt: 1.18.0 -> 1.19.0 2016-11-10 21:06:20 -05:00
Tobias Geerinckx-Rice 583af41f3c
remotebox: 2.1 -> 2.2 2016-11-09 02:24:46 +01:00
Frederik Rietdijk a18ac150a3 virtinst: use python2 2016-11-08 22:48:55 +01:00
Frederik Rietdijk 95c54db397 virtualbox: use python2
and remove python buildInput. Python should only be added when
`pythonBindings` is true.
2016-11-08 22:48:54 +01:00
Tim Steinbach 1ae2f86a32
rkt: 1.17.0 -> 1.18.0 2016-11-05 22:27:42 -04:00
Tobias Geerinckx-Rice c4f41a0a61
remotebox: 2.0 -> 2.1 2016-11-05 18:44:10 +01:00
Franz Pletz 25c01931bb
qemu: add patches to fix lots of CVEs
Patches from Debian and upstream git repo.

Fixes:

 * CVE-2016-6836
 * CVE-2016-7155
 * CVE-2016-7156
 * CVE-2016-7157
 * CVE-2016-7421
 * CVE-2016-7422
 * CVE-2016-7423
 * CVE-2016-7466
 * CVE-2016-8909
 * CVE-2016-8910
 * CVE-2016-9102
 * CVE-2016-9103
 * CVE-2016-9104
 * CVE-2016-9105
 * CVE-2016-9106

cc #20078
2016-11-03 02:45:16 +01:00
Tim Steinbach 282532e702
docker: 1.12.2 -> 1.12.3 2016-10-27 12:46:04 -04:00
Graham Christensen 69e8bac9cd
virtualbox: 5.1.6 -> 5.1.8 for many CVEs:
From LWN:
From the NVD entries:

CVE-2016-5501: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality,
integrity, and availability via vectors related to Core, a different
vulnerability than CVE-2016-5538.

CVE-2016-5538: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality,
integrity, and availability via vectors related to Core, a different
vulnerability than CVE-2016-5501.

CVE-2016-5605: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.1.4 in Oracle Virtualization allows remote
attackers to affect confidentiality and integrity via vectors related
to VRDE.

CVE-2016-5608: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect availability via vectors
related to Core, a different vulnerability than CVE-2016-5613.

CVE-2016-5610: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality,
integrity, and availability via vectors related to Core.

CVE-2016-5611: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality via
vectors related to Core.

CVE-2016-5613: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect availability via vectors
related to Core, a different vulnerability than CVE-2016-5608.
2016-10-26 22:18:00 -04:00
Frederik Rietdijk 7077a270bf Merge remote-tracking branch 'upstream/master' into HEAD 2016-10-26 13:06:43 +02:00
Tuomas Tynkkynen c78ccb92ec cbfstool: git-2015-07-09 -> 4.5
Fixes build.
2016-10-22 21:07:33 +03:00
Frederik Rietdijk e56832d730 Merge remote-tracking branch 'upstream/master' into HEAD 2016-10-22 17:23:24 +02:00
Frederik Rietdijk bd12c10993 openstack: use python2 2016-10-22 16:47:22 +02:00
Frederik Rietdijk 4833f8bada xen: use python2 2016-10-22 16:47:21 +02:00
Jörg Thalheim a3f38b9adc
rancher-compose: set version during build 2016-10-22 14:40:30 +02:00
Vladimír Čunát 4d5b893002 Merge #19081: gnome-3.22
Also master commits are brought in.
2016-10-20 23:04:10 +02:00
Derek Gonyeo a0295e21c5 rkt: libsystemd fix (#19658)
As of systemd 231, the LD_LIBRARY_PATH fix applied in the installPhase of rkt's
build was no longer valid, causing rkt to fail to work. This patch changes the
path to point to the new location of libsystemd, which is in ${systemd.lib}.
2016-10-18 20:00:44 +02:00
Jörg Thalheim dab4f0a720 Merge pull request #19506 from Mic92/rancher-compose
rancher-compose: init at 0.10.0
2016-10-15 22:11:19 +02:00
Jörg Thalheim d60b74e7db
rancher-compose: init at 0.10.0 2016-10-15 22:06:33 +02:00
Graham Christensen 9b99c9a296 Merge pull request #19570 from NeQuissimus/rkt_1_17_0
rkt: 1.15.0 -> 1.17.0
2016-10-15 07:09:48 -04:00