Commit graph

12515 commits

Author SHA1 Message Date
Malte Brandy fe143bac5b nixos/redis: Disable hugepages for redis via sysctl and not via a systemd-oneshot 2019-10-21 22:38:16 +02:00
Florian Klink 1125fb02cc
Merge pull request #71428 from talyz/gitlab-already-initialized-constant
gitlab: Get rid of most 'already initialized constant'-warnings
2019-10-21 20:52:54 +02:00
Tor Hedin Brønner aa910d164d nixos/seahorse: use seahorse's askpass by default 2019-10-21 18:01:15 +02:00
Franz Pletz cc9b18f223
Merge pull request #71406 from astro/collectd
collectd: plugins configuration, buildMinimalPackage
2019-10-21 10:34:34 +00:00
edef 0599c89d58
Merge pull request #71338 from edef1c/nix-daemon-opt-aliases
nixos/nix-daemon: don't refer to deprecated option aliases
2019-10-21 09:59:13 +00:00
SRGOM fe26d4c0df
nixos/x11/libinput: Document values for option
For option `scrollMethod`, document that there is an available value of `button`.
2019-10-21 12:46:01 +05:30
Aaron Andersen 1c4b13bb5b
Merge pull request #71067 from aanderse/httpd
nixos/httpd: remove deprecated extraSubservices option
2019-10-20 20:36:33 -04:00
Florian Klink f24b4fb411
nixos/networkmanager: remove networking.networkmanager.dynamic… (#71337)
nixos/networkmanager: remove networking.networkmanager.dynamicHosts
2019-10-21 02:33:28 +02:00
Aaron Andersen 9a91679b7a nixos/httpd: remove deprecated extraSubservices option 2019-10-20 20:16:45 -04:00
worldofpeace 64468d4121
Merge pull request #70931 from symphorien/system-config-printer
system-config-printer: 1.5.11 -> 1.5.12
2019-10-20 23:39:48 +00:00
Elis Hirwing 9319dd17d8
nixos/lidarr: Add dataDir option
This will bring this module to a state to be consistent with how the
other forks (sonarr & radarr) works.
2019-10-20 21:20:53 +02:00
Jan Tojnar f849554226
Merge branch 'staging-next' into staging 2019-10-20 16:49:29 +02:00
Florian Klink ca6c91e395 nixos/networkmanager: remove networking.networkmanager.dynamicHosts
This option was removed because allowing (multiple) regular users to
override host entries affecting the whole system opens up a huge attack
vector. There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using networking.hosts,
provide them via the DNS server in your network, or use
networking.networkmanager.appendNameservers to point your system to
another (local) nameserver to set those entries.
2019-10-20 16:37:41 +02:00
Florian Klink 0a4373a46d
Merge pull request #71319 from talyz/gitlab-revert-clear-out-initializers
Revert "nixos/gitlab: properly clear out initializers"
2019-10-20 13:38:14 +02:00
worldofpeace 42f567b30d Revert "nixos/gnome3: fix gnome-flashback"
This reverts commit 60aedadc59.

Using tests from #71212 I am now unable to reproduce there being issues
with starting the default metacity flashback session without this.
2019-10-19 19:57:49 -04:00
ft 1390ed10e7 nixos/widnow-managers/xmonad: fix systemd identifier for xmonad 2019-10-19 16:36:29 -07:00
ft 5834d78a20 ssdm: fix identifier for xserver-wrapper 2019-10-19 16:36:29 -07:00
Astro 06abd24886 nixos/collectd: add option buildMinimalPackage 2019-10-20 00:53:49 +02:00
Astro e2283d9533 nixos/collectd: add plugin config 2019-10-20 00:53:49 +02:00
worldofpeace a13b8ce0b8
Merge pull request #71115 from hedning/plymouth-gdm-fix
nixos/plymouth: do not order `plymouth-quit` after `display-manager`
2019-10-19 22:34:46 +00:00
talyz ed4a09c6f3 gitlab: Get rid of most 'already initialized constant'-warnings
On start, unicorn, sidekiq and other parts running ruby code emits
quite a few warnings similar to

/var/gitlab/state/config/application.rb:202: warning: already initialized constant Gitlab::Application::LOOSE_EE_APP_ASSETS
/nix/store/ysb0lgbzxp7a9y4yl8d4f9wrrzy9kafc-gitlab-ee-12.3.5/share/gitlab/config/application.rb:202: warning: previous definition of LOOSE_EE_APP_ASSETS was here
/var/gitlab/state/lib/gitlab.rb:38: warning: already initialized constant Gitlab::COM_URL
/nix/store/ysb0lgbzxp7a9y4yl8d4f9wrrzy9kafc-gitlab-ee-12.3.5/share/gitlab/lib/gitlab.rb:38: warning: previous definition of COM_URL was here

This seems to be caused by the same ruby files being evaluated
multiple times due to the paths being different - sometimes they're
loaded using the direct path and sometimes through a symlink, due to
our split between config and package data. To fix this, we make sure
that the offending files in the state directory always reference the
store path, regardless of that being the real file or a symlink.
2019-10-19 19:30:28 +02:00
Tor Hedin Brønner 927a6fdaad nixos/gnome3: launch gnome-shell wayland with RT scheduling
We create a wrapper which launches gnome-shell with the correct environment and
cap_sys_nice.

We can then override gnome-shell-wayland.service to use this wrapper.

NOTE: We need to force clear the environment, because the defaults aren't good
for user services. That should probably be fixed.
2019-10-19 17:14:38 +02:00
worldofpeace cf05f707d8
Merge pull request #71210 from worldofpeace/fix-gnome-flashback
nixos/gnome3: fix gnome-flashback
2019-10-18 23:57:45 +00:00
worldofpeace 1554e4a95e
Merge pull request #71298 from symphorien/nm-fortissl
networkmanager-fortisslvpn: create the local state directory
2019-10-18 23:50:33 +00:00
Symphorien Gibol a37b9636f7 networkmanager-fortisslvpn: create the local state directory
Otherwise connecting simply fails:
VPN connection: failed to connect: 'La création du fichier « /tmp/lib/NetworkManager-fortisslvpn/0507e3ef-f0e0-4153-af64-b3d9a025877c.config.XSB19Z » a échoué : No such file or directory'
2019-10-18 19:49:56 -04:00
worldofpeace 30cfe8d5f1
Merge pull request #71341 from edef1c/rabbitmq-example
nixos/rabbitmq: use a literalExample for example configItems
2019-10-18 21:07:02 +00:00
Florian Klink c41b37ef25
nixos/networkmanager: use tmpfiles to setup state directories (#71322)
nixos/networkmanager: use tmpfiles to setup state directories
2019-10-18 17:58:45 +02:00
edef 32c7f772f7 nixos/rabbitmq: use a literalExample for example configItems 2019-10-18 12:36:16 +00:00
edef a68219b79b nixos/nix-daemon: don't refer to deprecated option aliases
The `gc-` prefixed versions of these options have been
deprecated since Nix 2.0.
2019-10-18 12:27:43 +00:00
Frederik Rietdijk 1b5c537f45 Merge staging-next into staging 2019-10-18 12:27:41 +02:00
Florian Klink 5e593038d1 nixos/networkmanager: use tmpfiles to setup state directories 2019-10-18 12:11:55 +02:00
WilliButz 917b127314
Merge pull request #71243 from d-goldin/prometheus_blackbox_configfile
prometheus-blackbox-exporter: coercing cfg to path
2019-10-18 08:11:03 +02:00
talyz 201cca9a04 Revert "nixos/gitlab: properly clear out initializers"
This reverts commit 2ee14c34ed.

This caused the initializers directory to be cleaned out while gitlab
was running in some instances. We clean out the directory on the
preStart stage already, so ensuring existance and permissions should
suffice.
2019-10-18 08:00:56 +02:00
Dima b788467ec4 prometheus-blackbox-exporter: fixing path issue
This fixes an issue with a recent addition of a config file
check in c28ded36ef.

Previously it was possible to supply a path as a string
to `configFile`. Now it will fail checking the config file
during evaluation of the module due to sandboxing.

A toggle to disable the check, more informative log messages
and handling for various configFile values are added.
2019-10-18 02:03:02 +02:00
Frederik Rietdijk 0256080d11 nixos/pppd: add description for peers, unbreaks metrics job and channel
services.pppd.peers was lacking a description, causing a trace warning
resulting in a parse error in the metrics job.
2019-10-17 13:59:52 +02:00
Florian Klink 36756e930f udisks2: use tmpfiles instead of activation script to create /var/lib/udisks2 2019-10-16 20:31:33 -04:00
Franz Pletz ec6224b6cd Revert "installer: Disable udisks"
This reverts commit 571fb74f44.

The dependency on gtk2 was removed.

Co-authored-by: Florian Klink <flokli@flokli.de>
2019-10-16 20:31:24 -04:00
Franz Pletz 3d832dee59 gnupg: disable gui/pinentry support by default
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.

NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.

Co-authored-by: Florian Klink <flokli@flokli.de>
2019-10-16 20:31:16 -04:00
Franz Pletz c2576266ba nixos/gnupg: add option for setting pinentry flavours
Co-authored-by: Florian Klink <flokli@flokli.de>
2019-10-16 20:31:05 -04:00
Franz Pletz cb0adc11ff pinentry: build with multiple outputs in single drv
Co-authored-by: Florian Klink <flokli@flokli.de>
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
2019-10-16 20:30:52 -04:00
worldofpeace 2fbccbc728 Revert "Merge pull request #71095 from flokli/pinentry-cleanup"
This reverts commit 823da4d492, reversing
changes made to b75c8ee3bc.
2019-10-16 20:28:21 -04:00
worldofpeace 823da4d492
Merge pull request #71095 from flokli/pinentry-cleanup
Split pinentry flavors and enable udisks2 on install media again
2019-10-17 00:24:15 +00:00
Florian Klink e397b949a9 udisks2: use tmpfiles instead of activation script to create /var/lib/udisks2 2019-10-16 19:56:50 -04:00
Franz Pletz b04b354e2c Revert "installer: Disable udisks"
This reverts commit 571fb74f44.

The dependency on gtk2 was removed.

Co-authored-by: Florian Klink <flokli@flokli.de>
2019-10-16 19:56:50 -04:00
Franz Pletz b5bea4ce32 gnupg: disable gui/pinentry support by default
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.

NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.

Co-authored-by: Florian Klink <flokli@flokli.de>
2019-10-16 19:56:50 -04:00
Franz Pletz edea9fed72 nixos/gnupg: add option for setting pinentry flavours
Co-authored-by: Florian Klink <flokli@flokli.de>
2019-10-16 19:56:49 -04:00
Franz Pletz a4916fdea5 pinentry: build with multiple outputs in single drv
Co-authored-by: Florian Klink <flokli@flokli.de>
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
2019-10-16 19:56:49 -04:00
Florian Klink fff04a0a49
nixos/pppd: init (#71105)
nixos/pppd: init
2019-10-17 01:15:55 +02:00
worldofpeace 0dbbeabdab nixos/gnome3: copy flashback gschema overrides 2019-10-15 20:56:09 -04:00
worldofpeace 60aedadc59 nixos/gnome3: fix gnome-flashback
This session would fail to start because we didn't have it in systemd.packages
(as we've switched to systemd gnome-session).

Haven't tested custom sessions.
2019-10-15 20:15:46 -04:00
David Anderson 997a6f6f1e nixos/pppd: init 2019-10-15 08:36:09 -07:00
Tor Hedin Brønner 2c7f0f06b7
nixos/system-environment: prepend wrapperDir to PATH (#70430)
This fixes user environment setup for sessions which doesn't successfully go
through a shell init.

Note we don't go through `sessionVariables` as we want the wrappers to have
highest priority. It would also cause wrapperDir to occur twice when in shell
sessions, as shells use `sessionVariables` too while prepending wrapperDir in a
custom snippet.

In particular logging in and out of gnome-shell could result in a broken path
without this fix.
2019-10-15 13:17:38 +02:00
Jörg Thalheim faa7ce3ee5
Merge pull request #70240 from woffs/pr-etc-zpool.d
nixos module zfs: provide /etc/zfs/zpool.d
2019-10-15 11:45:52 +01:00
Maximilian Bosch 7774945b70
Merge pull request #70469 from Vskilet/matrix-synapse-update
matrix-synapse: 1.3.1 -> 1.4.0
2019-10-15 01:31:21 +02:00
Victor SENE 372422390f
matrix-synapse: 1.3.1 -> 1.4.0
Bumps `matrix-synapse` to version 1.4.0[1]. With this version the
following changes in the matrix-synapse module were needed:

* Removed `trusted_third_party_id_servers`: option is marked as deprecated
  and ignored by matrix-synapse[2].
* Added `account_threepid_delegates` options as replacement for 3rdparty
  server features[3].
* Added `redaction_retention_period` option to configure how long
  redacted options should be kept in the database.
* Added `ma27` as maintainer for `matrix-synapse`.

Co-Authored-By: Notkea <pacien@users.noreply.github.com>
Co-authored-by: Maximilian Bosch <maximilian@mbosch.me>

[1] https://matrix.org/blog/2019/10/03/synapse-1-4-0-released
[2] https://github.com/matrix-org/synapse/pull/5875
[3] https://github.com/matrix-org/synapse/pull/5876
2019-10-15 01:11:18 +02:00
Philip Potter 8120184bf1 ssh-agent: add agentPKCS11Whitelist option
If you want to be able to use OpenSC with ssh-agent, you need to be able
to add it to the ssh-agent whitelist.  This adds an option,
agentPKCS11Whitelist, that exposes the option.

Note that I currently work around this by injecting the parameter into
the agentTimeout option:

    programs.ssh.agentTimeout = "1h -P ${pkgs.opensc}/lib/opensc-pkcs11.so";

but I feel that a proper option would be better :)
2019-10-14 20:45:28 +01:00
Justin Humm b8cd11f347
smokeping: add erictapen as maintainer 2019-10-14 21:23:11 +02:00
Justin Humm 9eb067b0d7
nixos/smokeping: replace smokeping.fcgi with a symlink
This fixes a regression from bb649d96b0.
There were permission problems, when the preStart script tried to copy
the smokeping.fcgi file over the old file.
2019-10-14 21:11:47 +02:00
WilliButz 104b93eef0
Merge pull request #70070 from Ma27/borgbackup-removable-devices
nixos/borgbackup: add option to allow removable devices
2019-10-14 18:02:30 +02:00
Maximilian Bosch 2dfc67517a
nixos/borgbackup: add option to allow removable devices
When having backup jobs that persist to a removable device like an
external HDD, the directory shouldn't be created by an activation script
as this might confuse auto-mounting tools such as udiskie(8).

In this case the job will simply fail, with the former approach
udiskie ran into some issues as the path `/run/media/ma27/backup` was
already there and owned by root.
2019-10-14 17:28:44 +02:00
Tor Hedin Brønner 5924bab20b nixos/plymouth: do not order plymouth-quit after display-manager
GDM now specifies ordering between `plymouth-quit` and `display-manager`:
9be5321097

This causes an ordering cycle between GDM and plymouth-quit which can result in
systemd breaking GDM:
```
plymouth-quit.service: Job display-manager.service/start deleted to break
                       ordering cycle starting with plymouth-quit.service/start
```

Not sure how often this triggers, as I've run my system with plymouth and
9be5321097 without any issues. But I did catch a VM doing this.

NOTE: I also tried to remove the ordering in GDM to see if plymouth managed to
live longer, but it didn't seem to help. So I opted to stick as close to
upstream (upstream GDM specifies ordering, but plymouth does not).
2019-10-14 13:08:51 +02:00
Jörg Thalheim d633ec9787
Merge pull request #70601 from Mic92/zfs-trim
nixos/zfs: only enable trim if zfs is enabled
2019-10-14 11:04:35 +01:00
Jörg Thalheim 9a89467606
nixos/zfs: simplify logic for scrub/autosnapshot service
This makes them consistent with the way zfs.trim is enabled
and allow to enable them by default in future.
2019-10-14 10:30:57 +01:00
Silvan Mosberger 23d920c8f0
nixos/users: Increase maximum system uid/gid from 499 to 999
This enlarges the system uid/gid range 6-fold, from 100 to 600 ids. This
is a preventative measure against running out of dynamically allocated
ids for NixOS services with isSystemUser, which should become the
preferred way of allocating uids for non-real users.
2019-10-14 01:59:19 +02:00
worldofpeace dd050270c7 nixos/environment: don't set GTK_DATA_PREFIX or GTK_EXE_PREFIX
We had these set so gtk2 can discover themes properly, however we failed
realize that gtk2 already has a patch that makes it search in XDG_DATA_DIRS.
I don't believe any issue is solved by setting these.
2019-10-13 19:54:09 -04:00
Florian Klink 5d5b79d517
nixos/mysql: fix mysqlReplication test (#61671)
nixos/mysql: fix mysqlReplication test
2019-10-13 23:05:23 +02:00
worldofpeace 6d5fe6b8ed
Merge pull request #71065 from worldofpeace/gdm-no-plymouth-conflict
nixos/gdm: don't conflict with plymouth-quit
2019-10-13 17:34:00 +00:00
worldofpeace ed20a541c5 nixos/gdm: don't conflict with plymouth-quit
Co-Authored-By: Tor Hedin Brønner <torhedinbronner@gmail.com>
2019-10-13 13:30:43 -04:00
Izorkin 632f69e485 nixos/mysql: fix mysqlReplication test 2019-10-13 19:18:51 +03:00
Vladimír Čunát 4e6826a3b2
Merge branch 'staging-next'
It's not perfect, but I think we can deal with the rest of the
regressions directly on master, so that this process does not stall.
2019-10-13 16:10:58 +02:00
Maximilian Bosch 87178a2e6e
Merge pull request #71058 from WilliButz/add-nextcloud-exporter
prometheus-nextcloud-exporter: init at 2019-10-12, with module and test
2019-10-13 13:47:41 +02:00
Vladimír Čunát b5697c6954
Merge branch 'master' into staging-next
Hydra nixpkgs: ?compare=1548439
2019-10-13 13:31:33 +02:00
Maximilian Bosch eeb4726446
nixos/prometheus-wireguard-exporter: remove addr option
This option was added by mistake since `listenAddress` exists by default
for each prometheus-exporter. Using
`services.prometheus.exporters.wireguard.addr` will now cause a warning,
but doesn't break eval.
2019-10-13 12:16:46 +02:00
Vladimír Čunát 7818f30cc4
Merge #70499: nixos/steam-hardware: add uinput to boot.kernelModules 2019-10-13 10:21:49 +02:00
Tor Hedin Brønner d15e5b02fe
nixos/lightdm: do not conflict with plymouth (#71061)
Having `display-manager` conflict with `plymouth-quit` causes this lock up:

 - `plymouth-quit-wait` starts up, waiting for plymouth-quit to run
 - `lightdm` starts up
 - `plymouth-quit` can't start, it conflicts with lightdm
 - `plymouth-quit-wait` keeps waiting on plymouth-quit to kill plymouthd

The idea is having LightDM control when plymouth quits, but communication with
plymouth was broken: https://github.com/NixOS/nixpkgs/pull/71064

Unfortunately having the conflict breaks switching to configurations with
plymouth enabled. So we still need to remove the conflict.

fixes #71034
2019-10-13 10:03:54 +02:00
Symphorien Gibol 172950661f nixos/system-config-printer: depends on packagekit 2019-10-13 00:09:40 +02:00
WilliButz d953d328ca
nixos/prometheus-nextcloud-exporter: add module 2019-10-12 23:17:48 +02:00
Janne Heß d6c08776ba treewide: Switch to system users 2019-10-12 22:25:28 +02:00
Joachim F a8b2e302c6
Merge pull request #41841 from Izorkin/samba
samba: fix autostart service
2019-10-12 14:31:39 +00:00
Mario Rodas af4351ab85
Merge pull request #69255 from minijackson/init-shiori
Init shiori
2019-10-12 09:01:58 -05:00
Florian Klink 696d1d8a86
Merge pull request #71013 from worldofpeace/pulseaudio-no-autospawn
nixos/pulseaudio: don't autospawn ever
2019-10-12 14:36:49 +02:00
Florian Klink e24526d38e
Merge pull request #69422 from arianvp/fix-machinectl
nixos/systemd: Make machinectl work with NixOS
2019-10-12 14:12:44 +02:00
Joachim F 5bea2997fe
nixos/hardened: blacklist old filesystems (#70482)
The rationale for this is that old filesystems have recieved little scrutiny
wrt. security relevant bugs.

Lifted from OpenSUSE[1].

[1]: 8cb42fb665

Co-Authored-By: Renaud <c0bw3b@users.noreply.github.com>
2019-10-12 10:08:44 +00:00
worldofpeace 361b5f7f65 nixos/pulseaudio: don't autospawn ever
This is long been superseded by socket activation.
Additonally using autospawn nudges some unpleasant
GDM related issues.
2019-10-11 21:41:15 -04:00
Jan Tojnar 6c8aed6391
Merge branch 'master' into staging-next 2019-10-12 00:50:21 +02:00
Tor Hedin Brønner 5b7c900192
nixos/gdm: do not restart on reload switch (#70357)
Not entirely sure how this works, but this does seem to fix reload switch
killing the current graphical session.
2019-10-11 20:07:16 +02:00
Florian Klink 1aad3acf15
nixos/gitlab: Don't print sensitive data to log on startup (#70861)
nixos/gitlab: Don't print sensitive data to log on startup
2019-10-11 18:10:16 +02:00
Jan Tojnar 1739d34904
Merge pull request #70734 from jtojnar/nixos-rebuild-remote-fish
nixos-rebuild: Fix target-host using fish
2019-10-11 13:26:11 +02:00
Aaron Andersen 0b6067f93e
Merge pull request #68836 from Thra11/wacomtablet-kcm
wacomtablet: init at 3.2.0
2019-10-11 05:52:37 -04:00
Eelco Dolstra 9d0de0dc57
nix-daemon.nix: Shut up warning 2019-10-10 16:24:33 +02:00
Eelco Dolstra 27d2857a99
nix-daemon.nix: Use 'nix ping-store' to initialize directories 2019-10-10 16:24:33 +02:00
Eelco Dolstra 2c97f0669d
Typo 2019-10-10 16:24:33 +02:00
Eelco Dolstra 4b950c42cd
nix-daemon.nix: Drop Nix 1.x compatibility
Probably didn't work anyway anymore.
2019-10-10 16:24:33 +02:00
Eelco Dolstra 4e0d6a5ff8
Don't create /nix/var/nix/{gcroots,per-user}/per-user with 1777 permission
In fact, don't create them at all because Nix does that automatically.

Also remove modules/programs/shell.nix because everything it did is
now done automatically by Nix.
2019-10-10 16:24:33 +02:00
Eelco Dolstra 3ab3614e2b
nix: 2.3 -> 2.3.1 2019-10-10 16:23:33 +02:00
worldofpeace 1169336cd9
Merge pull request #70448 from worldofpeace/lightdm-improve-systemd
nixos/lightdm: improve systemd service
2019-10-09 21:22:19 +00:00
Robin Gloster 0bf7300375
Merge pull request #70850 from yoohaemin/patch-1
Fix documentation typo
2019-10-09 17:35:41 +02:00
Robin Gloster 8e1fdad7c6
Merge pull request #70858 from manveru/nginx-map-hash-sizes
nginx: add map_hash_*_size options
2019-10-09 17:32:40 +02:00
Christoph Hrdinka 65be608330
Merge pull request #70371 from dminuoso/dovecot-fix-type
dovecot: fix wrong type in configFile option
2019-10-09 17:25:12 +02:00
talyz dc29a45fc9 nixos/gitlab: Don't print sensitive data to log on startup
gitlab:db:configure prints the root user's password to stdout on
successful setup, which means it will be logged to the
journal. Silence this informational output. Errors are printed to
stderr and will thus still be let through.
2019-10-09 16:59:18 +02:00
Franz Pletz f024e7b769
Merge pull request #67890 from mguentner/mxisd_ma1sd
mxisd: 1.4.5 -> 1.4.6 ☺ ma1sd: init at 2.1.1
2019-10-09 14:36:56 +00:00
Milan Pässler ff0148d868 nixos/nginx: use mailcap mime.types
The mime type definitions included with nginx are very incomplete, so
we use a list of mime types from the mailcap package, which is also
used by most other Linux distributions by default.
2019-10-09 14:20:40 +00:00
Michael Fellinger 2d0b34aa1c
nginx: add map_hash_*_size options 2019-10-09 15:59:03 +02:00
Haemin Yoo 8fc5984e83
Fix documentation typo 2019-10-09 19:43:12 +09:00
José Romildo Malaquias f251c29484
Merge pull request #70035 from mkf/cwm-windowManager
nixos/cwm: init. Added windowManager cwm, basing on the module for dwm.
2019-10-09 07:04:39 -03:00
Andreas Rammhold 633baf4273
Merge pull request #70843 from B4dM4n/systemd-tmpfiles
nixos/systemd: fix broken tmpfiles.d symlinks
2019-10-09 11:44:19 +02:00
Fabian Möller 996d846726
nixos/systemd: fix broken tmpfiles.d symlinks 2019-10-09 10:53:01 +02:00
Robin Gloster b5449e65b5
Merge pull request #69344 from talyz/gitlab-create-database
nixos/gitlab: Fix databaseCreateLocally evaluation and operation
2019-10-09 00:28:21 +02:00
Robin Gloster b648a710af
Merge pull request #68721 from talyz/gitlab-fix
nixos/gitlab: Fix state directory permissions, clean up initializers directory
2019-10-09 00:27:12 +02:00
Eelco Dolstra b407822b85 locate.nix: Don't create /var/cache
Fixes

  setting up tmpfiles
  [/etc/tmpfiles.d/var.conf:19] Duplicate line for path "/var/cache", ignoring.
2019-10-08 21:45:42 +02:00
Michał Krzysztof Feiler 00633a3e13
nixos/window-managers: add cwm to imports
as per request from @romildo under #70035 https://github.com/NixOS/nixpkgs/pull/70035#pullrequestreview-298166798
2019-10-08 17:48:09 +00:00
Thomas Tuegel 22b4014900
Merge pull request #69357 from mtetreault/plymouth-custom-logo
breeze-plymouth: allow usage of custom logo
2019-10-08 05:32:07 -05:00
Jörg Thalheim 692656daf8
nixos/zfs: avoid script derivation for trim service
Since we only have a single pipe we can save the overhead of building a derivation
when creating the zfs trim service file when building the system.
2019-10-08 11:11:06 +01:00
Frederik Rietdijk a0c34f54cc Merge master into staging-next 2019-10-08 11:56:52 +02:00
Jan Tojnar 316d4faba4
nixos-rebuild: Fix target-host using fish
I have `users.defaultUserShell = pkgs.fish;` set on my server and when I ran `nixos-rebuild switch --target-host …`, the command failed with the following error:

    fish: Unsupported use of '='. To run 'nix-store' with a modified environment, please use 'env PATH=… nix-store…'

That is because fish requires env to set environment variables for a program. It should also work on other shells.
2019-10-08 11:43:05 +02:00
Vladimír Čunát f760f0ef48
Revert "Merge #67232: machinectl compliant NixOS installation"
This reverts commit 66967ec752, reversing
changes made to fb6595eafd.
Fixes #70442; discussion: https://github.com/NixOS/nixpkgs/pull/70027
2019-10-07 20:56:59 +02:00
Eelco Dolstra 37c22b9d30
Revive systemd.coredump.enable 2019-10-07 20:28:13 +02:00
Maximilian Güntner 176b1aeb4e
nixos/mxisd: add support for ma1sd
both servers only differ slighly so the module
can be reused
2019-10-07 18:57:15 +02:00
Mathieu A.-Tetreault 001b42db7f breeze-plymouth: allow usage of custom logo 2019-10-07 09:43:23 -04:00
Jörg Thalheim a412d90e10
nixos/zfs: only enable trim if zfs is enabled
Also don't fail the service if there are no pools yet.
This might happen on installation ISOs.
2019-10-07 10:44:56 +01:00
Linus Heckemann 0b754fbe54
Merge pull request #69302 from mayflower/networkd-disallow-dhcp
networkd: disallow useDHCP
2019-10-07 11:29:04 +02:00
Symphorien Gibol d9cac95878 nixos/xfce4-14: add xfce4-volumed-pulse when not using the desktop
xfce4-volumed-pulse is not abandoned, but is superseded by a panel
plugin which is not available when not using the desktop.

Fixes: volume up/down keys support
2019-10-06 21:22:44 +02:00
worldofpeace 67ac11e072 nixos/lightdm: improve systemd service
These improvements come from shopping around
at what other downstreams have done with their
systemd units and recent changes like [0] to gdm.

Note there's no requries or after on dbus.socket because
settings BusName will set this up automaticallly and
give it a type of dbus.

[0]: 2d57f45962
2019-10-06 10:23:21 -04:00
Joachim F 103180155d
Merge pull request #70447 from joachifm/feat/containers-private-networking-lockKernelModules-compat
nixos/containers: explicitly load kernel modules for networking
2019-10-06 11:00:36 +00:00
geistesk 7f9767954b nixos/go-shadowsocks2: init 2019-10-06 11:18:20 +02:00
Matthieu Coudron 2a25b5c3cb
Merge pull request #70503 from joachifm/feat/remove-blcr
Remove blcr package & nixos module
2019-10-06 17:23:12 +09:00
Joachim Fasting 923c449e9b
nixos/blcr: remove 2019-10-06 08:10:23 +02:00
(cdep)illabout 1137ac7785
nixos/steam-hardware: add uinput to boot.kernelModules
uinput needs to be added to boot.kernelModules in order for the udev
rules defined by steam to be run and set permissions correctly on
/dev/uinput.

See https://github.com/NixOS/nixpkgs/issues/70471.
2019-10-06 11:34:54 +09:00
worldofpeace 60ddfac0c6
Merge pull request #70465 from worldofpeace/pam-home
nixos/system-environment: use pam syntax for home variable
2019-10-05 15:04:31 +00:00
worldofpeace 57481b7a1c nixos/system-environment: use pam syntax for home variable 2019-10-05 09:43:47 -04:00
worldofpeace 789fcebdab
Merge pull request #46997 from worldofpeace/installer-autorun
installer: autorun xserver in graphical media
2019-10-05 11:34:27 +00:00
Maximilian Bosch d72f4e2ae0
Merge pull request #70422 from elseym/documize-writable-home
documize: introduce state directory
2019-10-05 13:20:58 +02:00
worldofpeace 99df63be0a nixos/pantheon: add elementary-default-settings for services
This is needed for the AccountsService interfaces (in systemPackages).
2019-10-05 06:43:38 -04:00
Joachim Fasting fe3da83b7e
nixos/containers: explicitly load kernel modules for networking
List all modules that *may* be required depending on individual container
configurations; don't expect that further modules can be loaded after boot.

Fixes https://github.com/NixOS/nixpkgs/issues/38676
2019-10-05 12:25:12 +02:00
Bas van Dijk 82259b5d54 thanos: 0.6.1 -> 0.7.0 2019-10-05 10:35:52 +02:00
Tor Hedin Brønner 9be5321097 nixos/gdm: follow upstream's service config 2019-10-05 05:15:29 +02:00
Tor Hedin Brønner 1efac91ca4 nixos/gdm: make config dir for gnome-initial-setup
Observed failure to lauch gdm in a VM due to missing /run/gdm.config.
2019-10-05 05:15:29 +02:00
worldofpeace 1f91fd0a03
Merge pull request #70362 from worldofpeace/gnome-shell-overides
nixos/gnome3: copy gnome-shell override
2019-10-05 02:53:52 +00:00
elseym 93fa16f939
documize: introduce state directory 2019-10-05 00:40:44 +02:00
lassulus 9d04a64a8f iso-image: add loopback.cfg support to boot iso from grub 2019-10-04 23:24:52 +02:00
Jörg Thalheim bf3360cdcf
nixos/zeronet: Improved config, dynamic user, remove static UI… (#70305)
nixos/zeronet: Improved config, dynamic user, remove static UID and GID
2019-10-04 10:23:13 +01:00
Victor Nawothnig 187c0b3aef Specify correct option type 2019-10-04 09:57:06 +02:00
worldofpeace eb14b000e5 nixos/gnome3: copy gnome-shell override
Without this these default settings overrides to gnome-shell
don't appear to be used completely.
2019-10-03 22:27:04 -04:00
Aaron Andersen 2448733001
Merge pull request #69371 from dasJ/memcached-sysuser
nixos/memcached: Switch to a system user
2019-10-03 18:11:00 -04:00
Okinan 5c18c08da9 nixos/zeronet: improved config, dynamic user 2019-10-03 17:03:32 -05:00
Nikolay Amiantov 2219129888 matrix-synapse service: blacklist local IPv6 addresses by default 2019-10-03 19:08:48 +03:00
talyz c6efa9fd2d nixos/gitlab: Clean up the initializers on start
The initializers directory is populated with files from the gitlab
distribution on start, but old files will be left in the state folder
even if they're removed from the distribution, which can lead to
startup failures. Fix this by always purging the directory on start
before populating it.
2019-10-03 14:38:54 +02:00
talyz 0f8133d633 nixos/gitlab: Fix state directory permissions
Since the preStart script is no longer running in privileged mode, we
reassign the files in the state directory and its config subdirectory
to the user we're running as. This is done by splitting the preStart
script into a privileged and an unprivileged part where the privileged
part does the reassignment.

Also, delete the database.yml symlink if it exists, since we want to
create a real file in its place.

Fixes #68696.
2019-10-03 09:02:00 +02:00
Okinan f2fc1b0046 nixos/zeronet: remove static uid and gid 2019-10-03 01:25:08 -05:00
worldofpeace 7e89933127
Merge pull request #70296 from worldofpeace/targets-want-gsd
nixos/gnome-settings-daemon: move systemd config here
2019-10-03 03:19:46 +00:00
worldofpeace fb7b158dda nixos/gnome-settings-daemon: move systemd config here
As I've decided that it doesn't make sense for the module to be shared [0]
we can move this config here.

[0]: 68ab37aa44
2019-10-02 22:51:11 -04:00
worldofpeace 489548310f nixos/iso-image: add menu entry to disable display-manager 2019-10-02 22:10:18 -04:00
worldofpeace f6f5151d57 installer: autorun xserver in graphical media 2019-10-02 22:10:18 -04:00
Elias Probst 86dea5559f nixos/networkmanager: allow iwd as Wi-Fi backend
This introduces an option wifi.backend to the networkmanager module.

Co-authored-by: Cole Mickens <cole.mickens@gmail.com>
Co-authored-by: worldofpeace <worldofpeace@protonmail.ch>
2019-10-02 21:52:58 -04:00
worldofpeace 5edb20533d
Merge pull request #70041 from worldofpeace/desktopmanager-compat
Fix certain desktop managers building together
2019-10-03 01:32:12 +00:00
Jan Tojnar b3fcd9375d
Merge branch 'master' into staging-next 2019-10-03 01:47:08 +02:00
Jan Tojnar 4655669483
Gnome 3.34 (#68608)
Gnome 3.34
2019-10-03 00:38:54 +02:00
worldofpeace dd86155fe4
nixos/gnome3: use sessionVariables
Without this GNOME_SESSION_DEBUG
likely won't be set in the systemd user environment.
2019-10-03 00:09:18 +02:00
worldofpeace 38147b9215
nixos/gnome-initial-setup: prevent run on existing systems
GNOME initial setup's run is conditioned on whether
the gnome-initial-setup-done file exists in XDG_CONFIG_HOME
Because of this, every existing user will have initial setup
running because they never ran it before.

To prevent this we create the file if the users stateVersion
is older than 20.03 (the release we added this module).

Also drop uneeded manual conflicts as systemd.packages
does handle this.
2019-10-03 00:09:12 +02:00
worldofpeace f462b376bb
nixos/gdm: prevent g-i-s from running 2019-10-03 00:09:12 +02:00
worldofpeace f9b44934bc
nixos/gnome-initial-setup: init
It tries to start during the GDM session even
with the conflicts.
2019-10-03 00:09:12 +02:00
Silvan Mosberger 899937e1ca
Merge pull request #69868 from Infinisil/config-check-warning
nixos/nix-daemon: Prevent network warning when checking config
2019-10-02 23:15:13 +02:00
Silvan Mosberger 643a329a4c
do-agent: init at 3.5.6 (#69186)
do-agent: init at 3.5.6
2019-10-02 22:34:26 +02:00
Peter Simons 8cd5aa8a82
Merge pull request #69194 from danbst/pg11-nixos
nixos/postgresql: switch default 9.6 -> 11
2019-10-02 20:02:25 +02:00
yvt 00a54207e0 nixos/do-agent: Depend on network-online.target 2019-10-03 02:44:33 +09:00
yvt e3c1ecf111 nixos/do-agent: Use DynamicUser 2019-10-03 01:30:41 +09:00
Frank Doepper 3065d00d74 nixos module zfs: provide /etc/zfs/zpool.d
The scripts for zpool iostat -c and zpool status -c are located in
/etc/zfs/zpool.d
2019-10-02 12:34:09 +02:00
worldofpeace 49bc1bf44a
Merge pull request #70137 from michaelpj/fix-pam-variable-subst
nixos/system-environment: fix variable substitution
2019-10-02 01:20:28 +00:00
Michael Peyton Jones d8b9742deb nixos/system-environment: fix syntax for environment variables
`@` synax is for `PAM_ITEM`s, `HOME` needs to use `$`.
2019-10-01 21:19:04 -04:00
Michael Peyton Jones 9d61ddaf82 nixos/system-environment: replace env vars in values of variables too
We were only replacing them in the profiles. We also need to do this in
the values of variables, including both the session-relative variables
and the non-session-relative variables.
2019-10-01 21:18:54 -04:00
worldofpeace 4b7cac98a1
Merge pull request #70166 from kcalvinalvin/plasma-cmt-fix
nixos/cmt: Update error message for cmt
2019-10-01 12:42:08 +00:00
Calvin Kim a96a5f37d2 nixos/cmt: Update error message for cmt
Added clearer error message for the failed assertion with libinput
2019-10-01 19:43:27 +09:00
worldofpeace db96124d3d
Merge pull request #68995 from worldofpeace/bump/libfprint
fprintd: 0.8.1 -> 0.9.0, libfprint: 0.99 -> 1.0
2019-10-01 05:38:33 +00:00
AmineChikhaoui 6ce605e18d
sdImage: add option to enable bzip2 compression
also make SD image compression the default setup.
Fixes issues with output size such as: https://hydra.nixos.org/build/102163603
2019-09-30 15:42:13 -04:00
Tor Hedin Brønner d27212d466 nixos/gnome3: enable systemd session
- register gnome-session and gnome-settings-daemon services.
- gnome-shell is already registered due to having a xdg portal
- manually specify that gsd is wanted by gnome-session
    (systemd.packages doesn't pick the .wants directories for some reason)
2019-09-30 19:39:50 +02:00
Tor Hedin Brønner fc43be57f0 nixos/gdm: start after getty@tty1
GDM is now killed if tty1 is started after gdm is launched. This follows
upstream's gdm service config.

This might cause problems with nixos-rebuild switch though. See the reasoning
and work that led to not following upstream on this:
  https://github.com/NixOS/nixpkgs/issues/21439
  4a180da
  c46d4da
2019-09-30 19:39:49 +02:00
Silvan Mosberger c75a18fea6
mkRemovedOptionModule: assert on removed options (#69419)
mkRemovedOptionModule: assert on removed options
2019-09-30 16:39:40 +02:00
Robin Gloster b08b0bcbbe mkRemovedOptionModule: assert on removed options
We don't want to ignore config that can mess up machines. In general
this should always fail evaluation, as you think you are changing
behaviour and don't, which can easily create run-time errors we can
catch early.
2019-09-30 12:07:13 +02:00
worldofpeace 9bc8169695 nixos/networkmanager: remove basePackages option
This option in now completely useless.
All the default configs for these packages
already have GNOME features default,
2019-09-29 20:36:49 -04:00
worldofpeace 68ab37aa44 nixos/gnome-settings-daemon: drop package option
After some thought, it doesn't make sense for this module to be shared.
2019-09-29 20:36:49 -04:00
Michał Krzysztof Feiler d9a7c51016
nixos/cwm: init
Added windowManager cwm, basing on the module for dwm.
2019-09-29 23:26:08 +02:00
Frederik Rietdijk 503081fa5b Merge staging into staging-next 2019-09-29 11:05:22 +02:00
worldofpeace 1d1ff2cc50
Merge pull request #67305 from adisbladis/iso-image-defaults
Change ISO image defaults
2019-09-28 18:09:08 -04:00
Maximilian Bosch beb59b76cf
prometheus-wireguard-exporter: 3.1.0 -> 3.1.1
https://github.com/MindFlavor/prometheus_wireguard_exporter/releases/tag/3.1.1

This release adds a flag `-l` which takes an address where the exporter
is available. The default is `0.0.0.0` (previously, `0.0.0.0` was used
by default).

Please note that there are no dependency changes in Cargo and therefore
the cargo hash didn't change.
2019-09-28 20:55:57 +02:00
Vladimír Čunát 4c07c0fdf0
nixos network-interfaces.nix: fixup after the last change
TL;DR: ipv6 tests were broken (probably the privacy-extension stuff)
https://github.com/NixOS/nixpkgs/pull/68227#issuecomment-536159177
2019-09-28 19:33:44 +02:00
Silvan Mosberger e463c7cd75
nixos/nix-daemon: Prevent network warning when checking config
Since version 2.3 (https://github.com/NixOS/nix/pull/2949 which was
cherry-picked to master) Nix issues a warning when --no-net wasn't
passed and there is no network interface. This commit adds the --no-net
flag to the nix.conf check such that no warning is issued.
2019-09-28 17:00:47 +02:00
Jörg Thalheim 5a73cd4f68
nixos/zfs: Enable trim by default (#69672)
nixos/zfs: Enable trim by default
2019-09-28 10:07:12 +01:00
Jörg Thalheim 3ed9892552
Merge pull request #69489 from Mic92/sysctl
nixos/sysctl: reduce prio of "kernel.kptr_restrict" to mkDefault
2019-09-28 10:06:54 +01:00
Vladimír Čunát fda4a08d4a
Merge branch 'staging-next'
There are several security fixes - again, as it consists mainly of the
previously reverted staging-next merge.
2019-09-28 07:43:04 +02:00
worldofpeace 07ca91187c
Merge pull request #69706 from worldofpeace/gdm-isnt-unstable
nixos/gdm: update description
2019-09-27 18:40:18 -04:00
worldofpeace e4cce87fba nixos/gdm: update description
GDM isn't dangerous anymore in NixOS.
2019-09-27 17:42:39 -04:00
Vladimír Čunát 217cf982c7
Merge branch 'master' into staging-next 2019-09-27 22:13:02 +02:00
Samuel Dionne-Riel 95005c1039
Merge pull request #68265 from tkerber/rpi4
Various: Add support for raspberry pi 4.
2019-09-27 14:35:17 -04:00
Svein Ove Aas e4f975765f
nixos/zfs: Enable trim by default 2019-09-27 18:35:03 +01:00
Joachim F ad773d31e2
Merge pull request #69345 from joachifm/feat/split-version
Replace uses of splitString for splitting version strings
2019-09-27 06:19:18 +00:00
worldofpeace 985697bff7
Merge pull request #66652 from craigem/clarify_wireless_examples
nixos/doc: Clarify wireless examples
2019-09-26 22:56:20 -04:00
Craige McWhirter cce7486deb nixos/doc: Clarify wireless examples
This commits makes it clearer to a novice reader how to configure several
diferent types of SSID connections that were otherwise obscurely documented

Resolves #66650
2019-09-26 22:52:21 -04:00
Joachim Fasting bad07dfac5
tree-wide: replace uses of splitString "." with lib.versions
Quoting from the splitString docstring:

   NOTE: this function is not performant and should never be used.

This replaces trivial uses of splitString for splitting version
strings with the (potentially builtin) splitVersion.
2019-09-26 17:42:49 +02:00
Linus Heckemann f0f3bd8d96
Merge pull request #68227 from volth/patch-362
network-interfaces.nix: escape '.' in interface names passed to sysctl
2019-09-26 12:16:24 +02:00
Jörg Thalheim 46dfb2d090
nixos/sysctl: reduce prio of "kernel.kptr_restrict" to mkDefault
Users should be able to override this value without having to use mkForce.
2019-09-26 10:09:31 +01:00
Peter Hoeg 8cc9d24fe1
Merge pull request #69387 from peterhoeg/f/optimise
nixos/nix-optimise: be smarter about when we run the store optimiser
2019-09-26 13:10:39 +08:00
Dmitry Kalinkin b3472597b7
Merge branch 'staging-next' into staging
Fixes eval on darwin after #69072

Tested using maintainers/scripts/eval-release.sh before and after to see
that the fix works
2019-09-25 19:31:32 -04:00
Dmitry Kalinkin c455adcc42
Merge branch 'master' into staging-next
Fixes eval on darwin after #69072

Resolved conflict in pkgs/tools/security/thc-hydra/default.nix
Basically had to revert a1c0e10564 which
adapts #69210 to master that doesn't yet have
329a88efa7

Tested using maintainers/scripts/eval-release.sh before and after to see
that the fix works
2019-09-25 19:21:46 -04:00
Daniel KT 4590a2380e nixos/nextcloud: add Strict-Transport-Security
This commit adds a Strict-Transport-Security header to
the nginx config file generated by the nextcloud module.

The Strict-Transport-Security header is recommended in
official guide for hardening Nextcloud installations:
https://docs.nextcloud.com/server/16/admin_manual/installation/harden_server.html

Further, if it is not set, we see a warning in the security scan results
in the Nextcloud admin panel:

```
The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips

```
2019-09-25 16:56:53 -04:00
Marek Mahut a28f136bdb
Merge pull request #69297 from aanderse/zabbix
nixos/zabbixServer: move pid file from default (/tmp) to /run/zabbix …
2019-09-25 20:35:50 +02:00
edef 429644bf4c nixos/rabbitmq: use an attrset for example configItems 2019-09-25 17:38:00 +00:00
markuskowa 389c287b90
Merge pull request #69398 from Evils-Devils/fancontrol
nixos/fancontrol: init
2019-09-25 18:34:16 +02:00
Arian van Putten 7058b0ad12 nixos/systemd: Make machinectl work with NixOS
Images generated with nixos-install will be supported by machinectl
problem is that systemd-nspawn's private usersns feature clashes
with DynamicUser and RuntimeDirectory features, which causes NixOS
images to not boot. There is an upstream issue for this
https://github.com/systemd/systemd/issues/13622
2019-09-25 18:27:19 +02:00
Evils-Devils 6765f049f2
Update nixos/modules/services/hardware/fancontrol.nix
Co-Authored-By: markuskowa <markus.kowalewski@gmail.com>
2019-09-25 17:31:20 +02:00
Evils-Devils 44e2ff26b8
Update nixos/modules/services/hardware/fancontrol.nix
Co-Authored-By: markuskowa <markus.kowalewski@gmail.com>
2019-09-25 17:24:49 +02:00
Evils 401b0b0c7b fancontrol: load config from configuration.nix 2019-09-25 17:05:09 +02:00
Evils-Devils 5fe72ee446
Update nixos/modules/services/hardware/fancontrol.nix
Co-Authored-By: markuskowa <markus.kowalewski@gmail.com>
2019-09-25 14:49:28 +02:00
Evils baa642e8b3 fancontrol: more cleanup 2019-09-25 14:42:22 +02:00
Markus Kowalewski 8b4ce06e63
nixos/orangefs: add modules for server and client 2019-09-25 14:17:08 +02:00
Evils 30f8bc974c update cfg to match section change 2019-09-25 13:43:06 +02:00
Evils-Devils 6c19673fef
Update nixos/modules/services/hardware/fancontrol.nix
Co-Authored-By: markuskowa <markus.kowalewski@gmail.com>
2019-09-25 13:28:16 +02:00
Franz Pletz 66967ec752
Merge pull request #67232 from ck3d/container-useHostResolvConf
machinectl compliant NixOS installation
2019-09-25 09:34:17 +00:00
Robin Gloster 68b42a84fd
Merge branch 'master' into networkd-disallow-dhcp 2019-09-25 11:28:20 +02:00
Evils 81b6dec3c8 fancontrol service init 2019-09-25 05:05:32 +02:00
Peter Hoeg 81cd220c67 nixos/pymks: log to journal 2019-09-25 06:33:34 +08:00
Peter Hoeg 4b34dd3120
Merge pull request #69300 from peterhoeg/f/ha2
nixos/home-assistant: set bluetooth perms
2019-09-25 04:49:31 +08:00
Janne Heß aa27c1c664 nixos/memcached: Switch to a system user 2019-09-24 20:10:19 +02:00
talyz 58a7502421 nixos/gitlab: Only create the database when databaseHost is unset
Make sure that we don't create a database if we're not going to
connect to it. Also, fix the assertion that usernames be equal to only
trig when peer authentication is used (databaseHost == "").
2019-09-24 15:04:20 +02:00
talyz ec958d46ac nixos/gitlab: Fix evaluation failure when postgresql is disabled
config.services.postgresql.package is only defined when the postgresql
service is activated, which means we fail to evaluate when
databaseCreateLocally == false. Fix this by using the default
postgresql package when the postgresql service is disabled.
2019-09-24 15:04:19 +02:00
Robin Gloster 6b87fb6df2
Merge pull request #69346 from rvolosatovs/fix/systemd-dhcp
nixos/network: replace deprecated DHCP=both by DHCP=yes
2019-09-24 14:14:30 +02:00
Florian Klink e813eb2b65
nixos/gitlab: Update release notes and documentation (#69313)
nixos/gitlab: Update release notes and documentation
2019-09-24 13:00:35 +02:00
Robin Gloster 5ee383ea8c
nixos-generate-config: add useDHCP per interface
This sets networking.useDHCP to false and for all interfaces found the
per-interface useDHCP to true. This replicates the current default
behaviour and prepares for the switch to networkd.
2019-09-24 11:44:01 +02:00
Roman Volosatovs a0a3675bdf
nixos/network: replace deprecated DHCP=both by DHCP=yes 2019-09-24 11:33:36 +02:00
Robin Gloster e862dd6373
networking.useDHCP: add release notes and docs 2019-09-24 10:20:17 +02:00
Robin Gloster c26c6241ea
networking.useDHCP: disallow for networkd
This setting will be removed with the switch to systemd-networkd. The
use of per interface config is encouraged instead.
2019-09-24 10:20:16 +02:00
Vladimír Čunát 192fb9d11b
Merge branch 'staging-next' into staging 2019-09-24 08:15:01 +02:00
Vladimír Čunát eab41878ac
Merge branch 'master' into staging-next 2019-09-24 08:14:34 +02:00
Jörg Thalheim bfed455de3
Merge pull request #68946 from volth/escape
treewide: fix string escapes
2019-09-24 04:19:12 +01:00
Jörg Thalheim c5bc77d151
Merge pull request #67748 from typetetris/yubico-local-auth
Yubico local auth
2019-09-24 03:31:39 +01:00
Notkea 981177e4dd nixos/postgresql-wal-receiver: remove restart limit (#67857)
useful in case of network disruption
2019-09-23 22:51:26 +03:00
talyz dfc43f7d0a nixos/gitlab: Document the restriction introduced on statePath
The state path now, since the transition from initialization in
preStart to using systemd-tmpfiles, has the following restriction: no
parent directory can be owned by any other user than root or the user
specified in services.gitlab.user. This is a potentially breaking
change and the cause of the error isn't immediately obvious, so
document it both in the release notes and statePath description.
2019-09-23 17:55:58 +02:00
Peter Hoeg e537a0a11e home-assistant: set capabilities for bluetooth 2019-09-23 21:54:16 +08:00
Robin Gloster 30591314e5
Merge pull request #68970 from teto/rngd
qemu-guest: allow to override security.rngd
2019-09-23 15:53:38 +02:00
Aaron Andersen 32a38d50bb nixos/zabbixServer: move pid file from default (/tmp) to /run/zabbix to avoid issues with PrivateTmp=true 2019-09-23 09:35:51 -04:00
Franz Pletz 0dc4fe0a44
nixos/systemd: pick more upstream tmpfiles confs
In #68792 it was discovered that /dev/fuse doesn't have
wordl-read-writeable permissions anymore. The cause of this is that the
tmpfiles examples in systemd were reorganized and split into more files.
We thus lost some of the configuration we were depending on.

In this commit some of the new tmpfiles configuration that are
applicable to us are added which also makes wtmp/lastlog in the pam
module not necessary anymore.

Rationale for the new tmpfile configs:

  - `journal-nowcow.conf`: Contains chattr +C for journald logs which
  makes sense on copy-on-write filesystems like Btrfs. Other filesystems
  shouldn't do anything funny when that flag is set.

  - `static-nodes-permissions.conf`: Contains some permission overrides
  for some device nodes like audio, loop, tun, fuse and kvm.

  - `systemd-nspawn.conf`: Makes sure `/var/lib/machines` exists and old
  snapshots are properly removed.

  - `systemd-tmp.conf`: Removes systemd services related private tmp
  folders and temporary coredump files.

  - `var.conf`: Creates some useful directories in `/var` which we would
  create anyway at some point. Also includes
  `/var/log/{wtmp,btmp,lastlog}`.

Fixes #68792.
2019-09-23 15:23:31 +02:00
Florian Klink 6262e83f5f
nixos/gitlab: Add gnutar and gzip to gitlab-sidekiq's path (#68908)
nixos/gitlab: Add gnutar and gzip to gitlab-sidekiq's path
2019-09-23 06:40:52 +02:00
Peter Hoeg 55509279a9
Merge pull request #69260 from volth/patch-369
nixos/mailcatcher: add bind capabilities
2019-09-23 11:27:32 +08:00
Peter Hoeg 423eb16913
Merge pull request #15560 from peterhoeg/nm_dnsdhcp
nixos/networkmanager: tiny cleanups
2019-09-23 10:16:32 +08:00
volth 6c038cd409
nixos/mailcatcher: add bind capabilities 2019-09-22 19:49:26 +00:00
Minijackson 367cd2c7f8
nixos/shiori: init with test 2019-09-22 18:48:07 +02:00
Jan Tojnar f2b9f5baa5
Merge branch 'staging-next' into staging 2019-09-22 16:39:56 +02:00
Jan Tojnar 11c2b06dd2
Merge branch 'master' into staging-next 2019-09-22 16:39:12 +02:00
Martin Milata 2adb03fdae nixos/wordpress: generate secrets locally
Use /dev/urandom to generate keys and salts instead of downloading them
from https://api.wordpress.org/secret-key/1.1/salt/
2019-09-22 14:33:08 +02:00
Peter Simons a486f0178d
Merge pull request #68950 from peti/t/nixos-doc-fix
nixos: improve the example that shows how to include nvidia_x11 in boot.extraModulePackages
2019-09-22 11:53:52 +02:00
danbst e557ad74ac move from 19.09 to 20.03 2019-09-22 12:27:39 +03:00