Commit graph

1260 commits

Author SHA1 Message Date
rembo10 8d1ad4317c headphones: init at 0.5.19 2018-09-16 21:48:18 +02:00
Christian Kögler 533efd0cfd initial NixOS module for LIRC 2018-09-14 03:57:51 +02:00
Yarny0 12fa95f2d6 modules: HylaFAX server configuration
This commit adds the following
* the uucp user
* options for HylaFAX server to control startup and modems
* systemd services for HylaFAX server processes
  including faxgettys for modems
* systemd services to maintain the HylaFAX spool area,
  including cleanup with faxcron and faxqclean
* default configuration for all server processes
  for a minimal working configuration

Some notes:

* HylaFAX configuration cannot be initialized with faxsetup
  (as it would be common on other Linux distributions).
  The hylafaxplus package contains a template spool area.
* Modems are controlled by faxgetty.
  Send-only configuration (modems controlled by faxq)
  is not supported by this configuration setup.
* To enable the service, one or more modems must be defined with
  config.services.hylafax.modems .
* Sending mail *should* work:
  HylaFAX will use whatever is in
  config.services.mail.sendmailSetuidWrapper.program
  unless overridden with the sendmailPath option.
* The admin has to create a hosts.hfaxd file somewhere
  (e.g. in /etc) before enabling HylaFAX.
  This file controls access to the server (see hosts.hfaxd(5) ).
  Sadly, HylaFAX does not permit account-based access
  control as is accepts connections via TCP only.
* Active fax polling should work; I can't test it.
* Passive fax polling is not supported by HylaFAX.
* Pager transmissions (with sendpage) are disabled by default.
  I have never tested or used these.
* Incoming data/voice/"extern"al calls
  won't be handled by default.
  I have never tested or used these.
2018-09-08 14:21:40 +02:00
Jan Tojnar 667e54bdb0
Merge pull request #45045 from jtojnar/rygel
Rygel
2018-09-08 06:22:37 +01:00
Jan Tojnar 60ae12f5de
nixos/rygel: init 2018-09-08 06:57:14 +02:00
geistesk 7469e68dda nixos/wavemon: create module 2018-09-07 20:35:17 +02:00
Timo Kaufmann e326c0156d
Merge pull request #45728 from Ma27/nixos/weechat-module
nixos/weechat: add module
2018-09-07 17:19:46 +02:00
Yegor Timoshenko b54987715b
weechat: add NixOS module 2018-09-07 13:09:08 +02:00
Janne Heß 32a2d08b23 nixos/nullidentdmod: Init 2018-09-06 16:31:20 +02:00
Janne Heß 9e25ebc03a nixos/iperf: Init the module 2018-09-06 12:38:30 +02:00
チルノ 17564e0ed9 nixos/zeronet: init (#44842) 2018-08-31 11:40:23 +01:00
Jan Tojnar f0136e4bc8
Merge pull request #45638 from aanderse/incron
incron: init at 0.5.12
2018-08-31 06:54:58 +01:00
Jan Tojnar 8a8056c302
Merge pull request #45058 from michaelpj/imp/freedesktop-modules
freedesktop modules: init
2018-08-30 16:14:35 +01:00
Augustin Borsu 4d3ce5ca36 nixos/jupyter: init service 2018-08-26 12:00:54 +02:00
Aaron Andersen fc03a9f5b7 initial work on incron service 2018-08-25 18:08:24 -04:00
Bas van Dijk 32200033a6 elasticsearch-curator: include the module in the module-list & fix bug 2018-08-25 18:53:10 +02:00
Jake Woods 4142020e45 nixos/undervolt: adding undervolt module
We want to be able to configure persistent undervolting
in the NixOS configuration
2018-08-20 21:01:19 +10:00
Michael Peyton Jones 13e2e19158
xdg: add modules for supporting various XDG specs 2018-08-16 21:23:34 +01:00
Jan Tojnar 7bfb3e163e
Merge pull request #45095 from worldofpeace/zeitgeist-service
nixos/zeitgeist: init
2018-08-16 15:02:06 +02:00
Johannes Frankenau f9129251ea nixos/triggerhappy: init 2018-08-16 11:00:29 +02:00
worldofpeace 48a765e641 nixos/zeitgeist: init 2018-08-15 20:05:00 -04:00
Samuel Leathers 67b1cbb39d
Merge pull request #40399 from rvl/datadog-agent
DataDog Agent v6
2018-08-15 15:53:03 -04:00
Silvan Mosberger 1a3b9e1bd2
Merge pull request #44556 from johanot/certmgr-module-init
nixos/certmgr: init
2018-08-10 15:11:26 +02:00
Johan Thomsen 004e7fb6fd nixos/certmgr: init 2018-08-10 09:56:25 +02:00
Rodney Lorrimar b9486e2b50 nixos/datadog-agent: add module
This is the new v6 version of datadog-agent.

The old v5 module is kept as dd-agent.
2018-08-09 16:53:31 +02:00
Thomas Bach 31e11bdd60 cassandra: rewrote service from scratch
Adds a replacement for the previously broken
`services.database.cassandra` with tests for a multi-node setup.
2018-08-07 14:48:43 +00:00
Silvan Mosberger d31f89df44
Merge pull request #44127 from johanot/nixos-cfssl
nixos/cfssl: Add new module for cfssl
2018-08-03 16:39:12 +02:00
Johan Thomsen 7d7c36f8be nixos/cfssl: init
- based on module originally written by @srhb
- complies with available options in cfssl v1.3.2
- uid and gid 299 reserved in ids.nix
- added simple nixos test case
2018-08-03 09:40:32 +02:00
Franz Pletz 9820531cb5
freeradius module: add to modules-list.nix
This was somehow never added and was thus never available. It works.
2018-08-01 22:24:47 +02:00
Franz Pletz b5477ab37b
freeradius: add rest module and multiple outputs 2018-08-01 22:24:47 +02:00
Maximilian Bosch cd5e01edd9 ocserv: init at 0.12.1 (#42871)
`ocserv` is a VPN server which follows the openconnect protocol
(https://github.com/openconnect/protocol). The packaging is slightly
inspired by the AUR version
(https://aur.archlinux.org/packages/ocserv/).

This patch initializes the package written in C, the man pages and a
module for a simple systemd unit to run the VPN server. The package
supports the following authentication methods for the server:

* `plain` (mostly username/password)
* `pam`

The third method (`radius`) is currently not supported since `nixpkgs`
misses a packaged client.

The module can be used like this:

``` nix
{
  services.ocserv = {
    enable = true;
    config = ''
      ...
    '';
  };
}
```

The option `services.ocserv.config` is required on purpose to
ensure that nobody just enables the service and experiences unexpected
side-effects on the system. For a full reference, please refer to the
man pages, the online docs or the example value.

The docs recommend to simply use `nobody` as user, so no extra user has
been added to the internal user list. Instead a configuration like
this can be used:

```
run-as-user = nobody
run-as-group = nogroup
```

/cc @tenten8401
Fixes #42594
2018-08-01 21:39:09 +02:00
Alexey Lebedeff c00d17aae3 epmd: Introduce erlang port mapper daemon service
Having socket-activated epmd means that there always be only a single
instance managed centrally. Because Erlang also starts it
automatically if not available, and in worst case scenario 'epmd' can
be started by some Erlang application running under systemd. And then
restarting this application unit will cause complete loss of names in
'epmd' (if other Erlang system are also installed on this host).

E.g. see at which lengths RabbitMQ goes to recover from such
situations:
7741b37b1e/src/rabbit_epmd_monitor.erl (L36)

Having the only one socket-activated epmd completely solves this
problem.
2018-07-19 17:32:29 +02:00
Maximilian Bosch 0adca53c79
inginious: remove
Fallout of 9db7f15ea3ce57eee25458daf87cce7a04ea98b2 which removed
simpleldap.

@layus suggests to remove:

* https://github.com/NixOS/nixpkgs/pull/43782#issuecomment-406186881
* https://github.com/NixOS/nixpkgs/pull/31975#issuecomment-346647857
2018-07-19 17:31:40 +02:00
Silvan Mosberger 810f91f46d
Merge pull request #43308 from Chiiruno/dev/hydron
hydron: init at 2018-07-11
2018-07-18 22:10:11 +02:00
Okina Matara 38f2a3efbf nixos/hydron: init 2018-07-18 13:16:50 -05:00
Wael M. Nasreddine fd2448b2e6 aerospike: init at 4.2.0.4
Co-authored-by: Volth <volth@webmaster.ms>
2018-07-16 04:21:47 +00:00
William Casarin 6c1eb15a3b nixos/modules: add clipmenu user service
add a clipmenud daemon user service
2018-07-15 12:22:46 -07:00
Peter Hoeg 6e3ee65b44
Merge pull request #43511 from peterhoeg/m/firejail
firejail: add nixos module
2018-07-14 21:04:11 +08:00
Peter Hoeg 65eb3a590d firejail: add nixos module
Also add support for wrapping binaries with firejail.
2018-07-14 20:21:41 +08:00
Jan Tojnar bf09bb5ef0 nixos/bamf: init 2018-07-11 18:58:02 +02:00
Yegor Timoshenko 1bb95d8409
Merge pull request #42775 from mkaito/oauth2_proxy-virtualHosts
oauth2_proxy: add nginx vhost module
2018-07-05 22:15:50 +03:00
Matthew Bauer 060a98e9f4
Merge pull request #41381 from aespinosa/hadoop-modules
nixos/hadoop: add hadoop module (hdfs, yarn)
2018-06-30 18:33:03 -04:00
Allan Espinosa 0c10b2baa6 nixos/hadoop: add hadoop module (hdfs, yarn) 2018-06-29 23:14:02 -04:00
Michishige Kaito 4a72999c75 oauth2_proxy: add nginx vhost module 2018-06-29 15:36:03 +01:00
Matthew Bauer e0cd8fc91a
Merge pull request #42394 from netixx/add-freeradius-modules
freeradius : added service to module-list
2018-06-28 22:09:46 -04:00
Matthew Bauer 50edf59e1b
Merge pull request #41430 from Tomahna/bloop
Bloop: Init 1.0.0-M11
2018-06-28 20:42:41 -04:00
Franz Pletz 2ef3ae5590
virtlyst service: init 2018-06-26 01:18:30 +02:00
Ambroz Bizjak d9fa88dfe8 Use a NixOS module for generating the gdk-pixbuf loaders cache.
Fixes issue #33231 and makes it possible to enable Plasma and KDE at the same time.

Previously, this worked like this:
- The gdk-pixbuf package comes with a cache file covering the modules bundled
  with gdk-pixbuf.
- The librsvg package comes with a cache covering modules from gdk-pixbuf as
  well as librsvg.
- plasma5 and xfce modules set the environment variable GDK_PIXBUF_MODULE_FILE
  to the one from librsvg, so that SVG was supported in addition to the
  formats supported by gdk-pixbuf. However if both were enabled a configuration
  conflict would result (despite setting to the same value).

While this sort of worked (ignoring the conflict which perhaps could be hacked
around), it is unscalable and a hack, as there would be a real problem when one
wanted to add a third package that supports additional image formats.

A new NixOS module (gdk-pixbuf) is added with a configuration option
(modulePackages) that other modules use to request specific packages to be
included in the loaders cache. When any package is present in the list, the
module generates a system-wide loaders cache which includes the requested
packages (and always gdk-pixbuf itself), and sets the environment variable
GDK_PIXBUF_MODULE_FILE to point to the generated cache file.

The plasma5 and xfce modules are updated to add librsvg to modulePackages
instead of setting GDK_PIXBUF_MODULE_FILE.

Note that many packages create wrappers that set GDK_PIXBUF_MODULE_FILE,
some directly to the one from librsvg. Therefore this change does not
change the existing hack in the librsvg package which ensures that
file is generated. This change aims only to solve the conflict in the
global environent variable configuration.
2018-06-25 16:23:45 +02:00
Kevin Rauscher ead58d100d bloop: init at 1.0.0-M11 2018-06-23 18:25:44 +02:00
Netix (Espinet François) 4ea4073c46 freeradius : added service to module-list
The freeradius service was merged with #34587
but the module was not added to module-list.

This commit fixes that and enables the use of
services.freeradius in nixos configuration.
2018-06-22 22:20:57 +02:00
Matthew Justin Bauer 3925077548
Merge pull request #41485 from teto/owamp
[RDY] Owamp : Get one way (network) latencies between synchronized computers
2018-06-20 21:45:36 -04:00
dje4321 1b7ce4c6d5 brightnessctl: init at 0.3.2 (#42102)
* brightnessctl: init at 0.3.2

* Revised PR
2018-06-16 18:15:42 -04:00
Matthew Justin Bauer 53a75e3a2a
Merge pull request #41737 from jraygauthier/jrg/uvcvideo_dynctrl_rebased
nixos/uvcvideo.dynctrl: Init
2018-06-15 22:26:30 -04:00
xeji bffc59badd
Merge pull request #37289 from disassembler/dnsdist
nixos/dnsdist: init module
2018-06-13 13:56:53 +02:00
Raymond Gauthier 3dfc9cd826 nixos/uvcvideo.dynctrl: Init 2018-06-11 11:33:49 -04:00
Maximilian Bosch aa46b1ec0e nixos/autosuggestions: add module (#41397)
The `zsh-autosuggestions` package provides several configuration options
such as a different highlight style (like `fg=cyan` which is easier to
read).

With `rename.nix` the old `programs.zsh.enableAutosuggestions` is still
functional, but yields the following warning like this during evaluation:

```
trace: warning: The option `programs.zsh.enableAutosuggestions' defined in `<unknown-file>' has been renamed to `programs.zsh.autosuggestions.enable'.
```

The module provides the most common `zsh-autosuggestions` (highlight
style and strategy) as options that will be written into the interactive
shell init (`/etc/zshrc` by default). Further configuration options can
be declared using the `extraConfig` attr set:

```
{
  programs.zsh.autosuggestions.extraConfig = {
    "ZSH_AUTOSUGGEST_BUFFER_MAX_SIZE" = "buffer_size";
  };
}
```

A full list of available configuration options for `zsh-autosuggestions`
can be viewed here: https://github.com/zsh-users/zsh-autosuggestions/blob/v0.4.3/README.md
2018-06-10 23:08:50 +02:00
Matthieu Coudron 358296c05a owamp: adding module
You can retrieve the one way latency between your client and the remote
host via owping.
2018-06-05 22:15:28 +09:00
Vladimír Čunát 448d7d648d
Merge branch 'staging'
It's only half-rebuilt on Hydra, but it brings a security fix.
2018-06-03 13:52:13 +02:00
Joachim F ae512f2d8e
Merge pull request #34886 from leenaars/mortyproxy
morty: init -> 0.2.0
2018-06-02 10:26:09 +00:00
Michiel Leenaars e9ff80d24a morty: init as service 2018-05-30 18:13:53 +02:00
gnidorah a3e239ac62 nixos/kvmgt: init 2018-05-29 19:29:23 +03:00
Okina Matara 14a26f0153 meguca: init at git-2018-05-17 2018-05-26 07:03:49 -05:00
WilliButz e91d3c9179
nixos/oxidized: add module 2018-05-24 04:40:45 +02:00
Maximilian Bosch 641a623053 nixos/xss-lock: add module (#40619)
`xsslock` (which was originally packaged in 6cb1d1aaaf)
is a simple screensaver which connects a given screen locker (e.g.
`i3lock`) with `logind`. Whenever `loginctl lock-sessions` is invoked
the locker will be used to lock the screen. This works with its power
management features (e.g. `lid switch`) as well, so the PC can be locked
automatically when the lid is closed.

The module can be used like this:

```
{
  services.xserver.enable = true;

  programs.xss-lock.enable = true;
  programs.xss-lock.lockerCommand = "i3lock";
}
```
2018-05-18 18:24:53 +02:00
Andreas Rammhold 8a93595550
sysprof: 1.2.0 -> 3.28.1 2018-05-16 16:54:12 +02:00
baroncharlus 380cdd8dd7 Add stubby resolver daemon service module (#38667)
* networking/stubby.nix: implementing systemd service module for stubby

This change implements stubby, the DNS-over-TLS stub resolver daemon.
The motivation for this change was the desire to use stubby's
DNS-over-TLS funcitonality in tandem with unbound, which requires
passing certain configuration parameters. This module implements those
config parameters by exposing them for use in configuration.nix.

* networking/stubby.nix: merging back module list

re-merging the module list to remove unecessary changes.

* networking/stubby.nix: removing unecessary capabilities flag

This change removes the unecessary flag for toggling the capabilities
which allows the daemon to bind to low ports.

* networking/stubby.nix: adding debug level logging bool

Adding the option to turn on debug logging.

* networking/stubby.nix: clarifying idleTimeout and adding systemd target

Improving docs to note that idleTimeout is expressed in ms. Adding the
nss-lookup `before' target to the systemd service definition.

* networking/stubby.nix: Restrict options with types.enum

This change restricts fallbackProtocol and authenticationMode to accept
only valid options instead of any list or str types (respectively). This
change also fixes typo in the CapabilityBoundingSet systemd setting.

* networking/stubby.nix: cleaning up documentation

Cleaning up docs, adding literal tags to settings, and removing
whitespace.

* networking/stubby.nix: fixing missing linebreak in comments

* networking/stubby.nix: cleaning errant comments
2018-05-16 15:16:30 +02:00
Peter Hoeg 7f27566efd
Merge pull request #40581 from peterhoeg/p/sedutil
sedutil: init at 1.15.1 and corresponding nixos module
2018-05-16 12:39:06 +08:00
Matthew Justin Bauer a3e4340149
Merge pull request #39536 from teto/iproute
[RDY] iproute: copy files in /etc
2018-05-15 11:36:31 -05:00
Yorick 261d993519
module-list: add youtrack module to list 2018-05-15 17:34:31 +02:00
Matthieu Coudron 1e0975f4c0 iproute2: module to create rt_table file & co
When doing source routing/multihoming, it's practical to give names to routing
tables. The absence of the rt_table file in /etc make this impossible.
This patch recreates these files on rebuild so that they can be modified
by the user see NixOS#38638.

iproute2 is modified to look into config.networking.iproute2.confDir instead of
/etc/iproute2.
2018-05-15 21:55:04 +09:00
Jan Tojnar d5060ac3a7
Merge pull request #33371 from jtojnar/flatpak
Flatpak
2018-05-15 14:19:33 +02:00
Jan Tojnar e0a42d991c
nixos/flatpak: init 2018-05-15 13:28:29 +02:00
xeji 3d6f752c51
Merge pull request #39099 from teto/qemu_agent
qemu-guest-agent: init module
2018-05-10 01:22:52 +02:00
Jaka Hudoklin 3ec4528dcf
Merge pull request #39991 from xeji/remove-fleet
fleet, panamax: remove
2018-05-05 08:07:14 +02:00
gnidorah 9f1da66587 ndppd module: init (#35533) 2018-05-05 00:33:20 -05:00
Uli Baum c3eefe801a fleet: remove package, module, test
deprecated and unmaintained upstream
2018-05-05 00:28:16 +02:00
Uli Baum f039bf9abc panamax: remove packages, module and test
was broken and depends on (deprecated) fleet
packages: panamax_api, panamax_ui
2018-05-05 00:27:15 +02:00
Pascal Bach 7f53ee8412 restic-rest-server module: init 2018-05-04 16:55:06 +02:00
Samuel Leathers f515ca67f5
nixos/dnsdist: initial service 2018-05-02 10:30:30 -04:00
Michael Weiss 1b8642dff6
nixos/monetdb: init (#39812) 2018-05-01 16:44:12 +02:00
Julien Langlois 519b64592d hitch: init at 1.4.8 + service + test (#39358)
Add the Hitch TLS reverse proxy as an option for TLS termination.
2018-05-01 10:36:36 +01:00
Peter Hoeg 3c63bda681
Merge pull request #39137 from peterhoeg/m/lcd
nixos lcdproc: module for lcdd/lcdproc
2018-04-28 22:57:59 +00:00
Matthieu Coudron ca0604190e qemu-guest-agent: init module
Allow out of band communication between qemu VMs and the host.
Useful to retrieve IPs of VMs from the host (for instance when libvirt can't analyze
DHCP requests because VMs are configured with static addresses or when
there is connectivity default).
2018-04-27 18:32:15 +09:00
Robin Gloster 94f5e5ad14
Revert "gitlab: disable"
This reverts commit 68c4605f1a.

Gitlab has been fixed
2018-04-26 00:15:24 +02:00
Peter Hoeg 077811ebe3 nixos lcdproc: module for lcdd/lcdproc 2018-04-25 22:16:07 +08:00
Austin Seipp 18f28a6413 nixos: add foundationdb module, documentation
Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-04-23 12:13:09 -05:00
Matthew Justin Bauer 14e66c1659
Merge pull request #36734 from gnidorah/hans
nixos/hans: init
2018-04-23 11:42:09 -05:00
Matthew Justin Bauer e4717c902f
Merge pull request #27958 from LumiGuide/strongswan-swanctl
nixos: add the strongswan-swanctl service
2018-04-21 15:47:39 -05:00
Lassulus 6db2057f00 nixos/restic: init (#38948) 2018-04-21 11:12:43 +01:00
Matthew Justin Bauer 1a1f26ab3f
Merge pull request #37786 from woffs/fixing-quagga
quagga service: fix service and re-enable test
2018-04-17 10:12:11 -05:00
Nikolay Amiantov f7651b35b8 shadowsocks service: init 2018-04-13 13:39:21 +03:00
BjornMelgaard 2f4a220130 safeeyes: add module 2018-04-10 21:19:13 +03:00
Matthew Justin Bauer 07886aaf5a
Merge pull request #33794 from yrashk/onlykey
config.hardware.onlykey configuration option
2018-04-09 14:29:31 -05:00
Matthew Justin Bauer 1381606b8e
Merge pull request #38533 from nyanloutre/duplicati-package
duplicati: init at 2.0.3.3
2018-04-08 21:49:48 -05:00
nyanloutre b3aa9ecdf8
duplicati: create service 2018-04-07 21:23:04 +02:00
Maximilian Bosch 50a34e55b2
nixos/iftop: add module
This patch is heavily inspired by bd0d8ed807 which added
a setcap wrapper for `mtr` in order to allow running `mtr` without
`sudo`. The need for the capability `cap_net_raw` that can be registered using
`setcap` has been documented in the Arch Wiki: https://wiki.archlinux.org/index.php/Capabilities#iftop

A simple testcase has been added which starts two machines, one with a
setcap wrapper for `iftop`, one without. Both testcases monitor the
bandwidth usage of the machine using the options `-t -s 1` once, the
machine with setcap wrapper is expected to succeed, the `iftop` on the
machine without setcap wrapper is expected to return a non-zero exit
code.
2018-04-07 15:06:51 +02:00
Jan Malakhovski 98fd9b7f86 nixos: doc: introduce documentation config subtree 2018-03-30 06:52:26 +00:00
Wout Mertens b4e92e0b34
Merge pull request #37921 from gnidorah/gitweb
nixos/nginx: add gitweb sub-service
2018-03-30 00:18:44 +02:00
Robin Gloster 68c4605f1a
gitlab: disable
The last rubygems update broke this
2018-03-29 19:17:49 +02:00
gnidorah 2821d3fed7 gitweb: use common options 2018-03-29 16:45:32 +03:00
gnidorah 69a0c9721e nixos/nginx: add gitweb sub-service 2018-03-29 09:06:54 +03:00
gnidorah b2be363fea nixos/hans: init 2018-03-27 22:25:22 +03:00
Guillaume Maudoux c948613a65 almir: also remove the corresponding module.
The almir package was removed in 30291227f2 at about 2017-08
This module can no more be used without it.
2018-03-25 21:41:19 +01:00
Frank Doepper 66deb3aa29 quagga service: fix service and re-enable test
adding quagga to quaggavty
reverting 8a18e1f
2018-03-25 21:26:45 +02:00
Matthew Justin Bauer 779c25b2fe
Merge pull request #34053 from thpham/serviio
serviio: init at 1.9
2018-03-22 11:11:17 -05:00
Robin Gloster fda705527d
nixbot: remove
obsoleted mostly by ofborg
2018-03-22 16:17:12 +01:00
WilliButz f4d03b5c9c
nixos/prometheus-exporters: rewrite and restructure
- prometheus exporters are now configured with
  `services.prometheus.exporters.<name>`
- the exporters are now defined by attribute sets
  from which the options for each exporter are generated
- most of the exporter definitions are used unchanged,
  except for some changes that should't have any impact
  on the functionality.
2018-03-22 14:46:17 +01:00
Robert Schütz c484079ac7
Merge pull request #36927 from dotlambda/borg-module
nixos/borgbackup: init
2018-03-19 20:30:32 +01:00
Robert Schütz fdf0f037be nixos/borgbackup: init 2018-03-19 13:12:47 +01:00
Peter Hoeg c33d8f3d6d nixos sedutil: module for setting up kernel parameters 2018-03-19 12:12:56 +08:00
Yurii Rashkovskii 738bcfdef8
config.hardware.onlykey configuration option
By default, OnlyKey device (https://crp.to/p/) won't work on Linux (and,
therefore, NixOS). This is unintuitive and requires one to search for a
solution in the documentation.

This change allows one to enable OnlyKey device support directly from
their NixOS configuration.
2018-03-18 12:49:13 +07:00
Justin Bedo 5c1e42276d
singularity: 2.4 -> 2.4.2 2018-03-12 15:13:31 +11:00
Vladimír Čunát 2069a2a002
Merge #35454: nixos/pump.io: remove 2018-03-04 10:49:25 +01:00
lejonet 565f22d27a nixos/ceph: init module (#35299)
All 5 daemon types can be enabled and configured through the module and the module both creates the ceph.conf required but also creates and enables specific services for each daemon, based on the systemd service files that upstream provides.
2018-03-01 11:47:13 +00:00
Bas van Dijk bd24b3addd nixos: add the strongswan-swanctl service
The strongswan-swanctl systemd service starts charon-systemd. This implements a IKE daemon
very similar to charon, but it's specifically designed for use with systemd. It uses the
systemd libraries for a native integration.

Instead of using starter and an ipsec.conf based configuration, the daemon is directly
managed by systemd and configured with the swanctl configuration backend.

See: https://wiki.strongswan.org/projects/strongswan/wiki/Charon-systemd

Note that the strongswan.conf and swantctl.conf configuration files are automatically
generated based on NixOS options under services.strongswan-swanctl.strongswan and
services.strongswan-swanctl.swanctl respectively.
2018-02-28 10:41:54 +01:00
David Asabina e41ca3b347 digitalbitbox: init at 2.2.2 (#33787)
* digitalbitbox: init at 2.2.2

The commits that lead to this have been squashed from independent
commits see branch @vidbina/add/digitalbitbox-wip that did the
following:
 - 0a3030fa0ec digitalbitbox: init at 2.2.2
 - c18ffa3ffd4 digitalbitbox: moved meta to EOF
 - 0c5f3d6972a digitalbitbox: using preConfigure + configureFlags
 - a85b1dfc3fd digitalbitbox: nativeBuildInputs
 - 90bdd35ef0f digitalbitbox: autoreconfHook
 - 91810eea055 digitalbitbox: default installPhase & makeWrapper
 - 90e43fb7e2a digitalbitbox: doc rm $PWD hack & printf-tee deal
 - fd033b2fe5a digitalbitbox: cleanup, alphabetically sort attrs
 - c5907982db3 digitalbitbox: added hardware module
 - 88e46bc9ae0 digitalbitbox: added program module
 - amend to change name: dbb-app -> digitalbitbox
 - amend to add install instructions based on feedback
 (https://github.com/NixOS/nixpkgs/pull/33787#issuecomment-362813149)
 - amend to add longDescription
 - moved program to its own dir
 - overridable udev rules handling
 - added docs to manual
 - added package attr to program module
 - added package attr to hardware module

* digitalbitbox: use libsForQt5.callPackage
2018-02-27 22:40:22 +00:00
Rodney Lorrimar 21dcead5f0
nixos/pump.io: remove
This would probably be better maintained in a separate repo as an
external NixOS module which gets imported into user's configuration.
2018-02-27 12:52:51 +00:00
Franz Pletz 37c009ca74
Merge pull request #34028 from florianjacob/matomo
piwik is now matomo
2018-02-26 06:53:58 +00:00
Peter Hoeg 095260a1c9 nixos udevil: set up wrapper for udevil 2018-02-26 14:30:22 +08:00
Florian Jacob 48e449ee70 nixos/piwik: rename to matomo 2018-02-22 22:03:55 +01:00
Raymond Gauthier de1d486265 brscan4 module: Added to modules-list.nix.
As requested by multiples users in #20632.
2018-02-20 19:35:33 -05:00
Will Dietz ce3de0399b
Merge pull request #30057 from dtzWill/feature/webos-novacomd
webos: init novacom, novacomd, cmake-modules; add nixos service
2018-02-20 13:49:06 -06:00
Joachim F b30fae01cd
Merge pull request #32761 from xvapx/crashplan-small-business
crashplan-small-business: init at 6.6.0
2018-02-20 19:19:22 +00:00
Will Dietz e5e29284a9 webos: init novacom, novacomd, cmake-modules; add nixos service 2018-02-20 10:34:19 -06:00
Richard Marko 7367918f44 nixos/nixops-dns: init (#34511) 2018-02-20 10:14:55 +00:00
Michael Raskin 1e23a5a6e9
Merge pull request #34795 from oxij/os/nixosLabel-pt2
nixos: labels part 2
2018-02-19 14:45:17 +00:00
Shea Levy c64639b54c
nixos/binfmt: Initial binfmt_msc support. 2018-02-18 12:42:17 -05:00
Jan Malakhovski 8200e08b0b nixos: move nixosLabel to its own module 2018-02-18 12:56:30 +00:00
Herwig Hochleitner 28875192ae programs.systemtap: add nixos option for installing systemtap
also enables debug feature on kernel
2018-02-15 09:10:32 +01:00
Herwig Hochleitner 66080ae4d8 programs.criu: add nixos option for installing criu + kernel flags 2018-02-15 09:10:32 +01:00
Sam Parkinson 16fa6f59f7
nixos/plotinus: add module to enable plotinus 2018-02-14 22:25:12 +01:00
Alexey Lebedeff 6d442efe99 zsh-autoenv: init at 2017-12-16 (#34932) 2018-02-14 06:31:59 +00:00
Jan Tojnar 44695e7045
Merge pull request #34507 from jtojnar/pipewire
pipewire: init at 0.1.8
2018-02-14 02:29:39 +01:00
markuskowa bf53dc68c2 nixos/rdma-core: add module for soft RoCE and test (#34607) 2018-02-10 07:52:03 +00:00
Franz Pletz 3748f3aac8
Merge pull request #32582 from Ma27/yabar-module
yabar: add module
2018-02-09 18:43:59 +00:00
Thomas Pham f0bafef6a1 add Serviio Media server package and service 2018-02-07 20:45:30 +01:00
rnhmjoj 5118b86800 nixos/monero: init 2018-02-07 08:04:36 -05:00
Joachim F 97ab8d8981
Merge pull request #17106 from spacefrogg/openafs
openafs: Refactor and introduce server module
2018-02-06 14:43:55 +00:00
Michael Raitza d0ebdbd308 nixos/openafsServer: OpenAFS server nixos module 2018-02-02 16:43:44 +01:00
Jan Tojnar dfe7a54d19
nixos/pipewire: init 2018-02-01 22:40:51 +01:00
Michael Raitza c389d705f3 nixos/openafsClient: relocate nixos module 2018-02-01 16:35:18 +01:00
Frederik Rietdijk d30735f889
Merge pull request #34188 from dotlambda/home-assistant
home-assistant: init at 0.62.1
2018-02-01 08:44:48 +00:00
Robert Schütz bacbc48cfe home-assistant: add NixOS module 2018-01-31 12:30:31 +01:00
Peter Hoeg dc52fc6dda aria2 (nixos): actually load the module
Fixes #33991
2018-01-31 09:42:03 +08:00
Jörg Thalheim add22af095
Merge pull request #34381 from JohnAZoidberg/less
nixos/less configure less with module
2018-01-30 10:41:39 +00:00
Daniel Schaefer 192c2330d0 nixos/less configure less with module 2018-01-29 18:40:22 +07:00
Leon Schuermann 04c4c01089 nixos/stunnel: add module (#33151) 2018-01-21 11:23:07 +00:00
Jan Tojnar d2d1a2dfba
Merge pull request #28882 from jtojnar/chrome-gnome-shell
chrome-gnome-shell: refactor
2018-01-19 13:40:42 +01:00
Francesco Gazzetta 356eeb0d4f nixos/mighttpd2: init 2018-01-16 21:04:09 +00:00
Linus Heckemann 730f8530a8 amd-hybrid-graphics module: remove
This was only applicable to very specific hardware, and the only person
with an apparent interest in maintaining it (me) no longer uses the
hardware in question.
2018-01-15 23:17:12 +00:00
Jan Tojnar 38b6d7b60e
nixos/chrome-gnome-shell: init 2018-01-13 15:19:19 +01:00
rnhmjoj 4ebb9621f4
Revert "nixos/dnscrypt-proxy: remove"
This reverts commit 5dc2853981.
The project has a new maintainer.
2018-01-08 15:09:33 +01:00
Joachim Fasting 5dc2853981 nixos/dnscrypt-proxy: remove
The upstream project ceased.

See https://github.com/NixOS/nixpkgs/issues/33540
2018-01-07 17:00:32 +01:00
Graham Christensen 013580caf0
Merge pull request #30518 from Infinisil/usbmuxd-service
usbmuxd service: init
2018-01-06 15:53:42 -05:00
Léo Gaspard cb506e6e2e
nixos/clamsmtp: init 2018-01-06 16:08:54 +01:00
zimbatm eddf30cc93
nixos: introduce boot.growPartition (#33521)
Move it from being a profile
2018-01-06 13:52:51 +00:00
Peter Hoeg 423dd6cc29
Merge pull request #33415 from peterhoeg/p/hv
hyperv-daemons: package and nixos module
2018-01-04 21:11:34 +08:00
Peter Hoeg 85e507ebea hyperv-daemons: add nixos module 2018-01-04 21:09:01 +08:00
Maximilian Bosch dbc414a8a5
yabar: add module
To make the configuration of `yabar` more pleasant and easier to
validate, a NixOS module will be quite helpful.

An example config could look like this:

```
{
  programs.yabar = {
    enable = true;
    bars.top.indicators.exec = "YA_DATE";
  };
}
```

The module adds a user-controlled systemd service which runs `yabar` after
starting up X.
2018-01-04 09:58:21 +01:00
Léo Gaspard aa241aed14 nixos/dkimproxy-out: init (#33229) 2018-01-03 01:23:02 +00:00
Vladimír Čunát 1fcd92ce92
Merge branch 'master' into staging
A few thousand rebuilds from master, again.
Hydra: ?compare=1422362
2017-12-31 09:53:49 +01:00
Markus Kowalewski b7fdefc8a4 beegfs: init at 6.17
package, kernel module, nixos module, and nixos test
2017-12-31 07:07:02 +00:00
Robin Gloster 445e3d7390 ghostOne: remove
broken and unmaintained
2017-12-29 02:18:35 +01:00
Jörg Thalheim b65f942eae
Merge pull request #28022 from volth/ccache
nixos/ccache: init
2017-12-24 13:41:48 +01:00
Michael Weiss b322cad42b nixos/rootston: Init
Probably only relevant for a quick testing setup and NixOS VM tests.
2017-12-23 17:34:29 +01:00
gnidorah b9851a975e Make less known wayland compositors usable (#32285)
* bemenu: init at 2017-02-14

* velox: 2015-11-03 -> 2017-07-04

* orbment, velox: don't expose subprojects

the development of orbment and velox got stuck
their subprojects (bemenu, dmenu-wayland, st-wayland) don't work correctly outside of parent projects
so hide them to not confuse people
swc and wld libraries are unpopular and unlike wlc are not used by anything except velox

* pythonPackages.pydbus: init at 0.6.0

* way-cooler: 0.5.2 -> 0.6.2

* nixos/way-cooler: add module

* dconf module: use for wayland

non-invasive approach for #31293
see discussion at #32210

* sway: embed LD_LIBRARY_PATH for #32755

* way-cooler: switch from buildRustPackage to buildRustCrate #31150
2017-12-21 16:16:19 +00:00
Marti Serra f24b642587 crashplan-small-business: init at 6.6.0 2017-12-18 07:20:18 +01:00
Peter Simons 0fe9785305
Merge pull request #32584 from manoj23/davfs2-v3
davfs2: create user/group davfs2 if not specified in the configuration
2017-12-17 08:53:18 +01:00
Jörg Thalheim 5687f61b19
Merge pull request #32637 from makefu/pkgs/openstack/nuke
nuke openstack (again)
2017-12-15 10:06:23 -08:00
makefu 71767ee3c7
glance: rip
part of openstack cleanup
2017-12-15 16:08:10 +01:00
makefu d3d94992cf
keystone: rip
part of openstack cleanup
2017-12-15 16:06:44 +01:00
Franz Pletz 2754d1a8c3
xmr-stak module: init 2017-12-14 16:03:09 +01:00
Georges Savoundararadj 9724654c74 davfs2: create user/group davfs2 if not specified in the configuration
* Add options:
  - enable
  - davUser (default: "davfs2")
  - davGroup (default: "davfs2)
* Add davfs2 user or group if they are not specified in the
configuration
2017-12-11 19:30:25 -08:00
Joachim F 1541211c31
Merge pull request #32261 from erictapen/osrm-module
osrm service: init
2017-12-07 21:32:42 +00:00
Justin Humm bfc3844a15 osrm service: init 2017-12-07 18:51:39 +01:00
Pierre Carrier 5a5325d11f nixos/modules/services/hardware/u2f: init 2017-12-06 07:37:44 +01:00
Domen Kožar d64ba1c060
Add localtime package and nixos module
Simple daemon for keeping system timezone up-to-date via geoclue2.

Sadly i3 status needs to be restarted for timezone changes.
2017-12-03 11:42:51 +01:00
Vladimír Čunát 6345089ca0
Merge #29392: gnome3: 3.24 -> 3.26
It might be slightly confusing that a couple of the changes will be twice
in the history, but let's merge this way.
2017-11-27 12:19:01 +01:00
Jan Tojnar 6e0fc275d6
nixos/tracker-miners: init 2017-11-26 03:10:56 +01:00
Jan Tojnar 193c4c5701
Merge pull request #30252 from jtojnar/fwupd
fwupd: 0.9.6 → 1.0.1
2017-11-24 04:07:52 +01:00
Thomas Strobel 67ce1357fa nixos: init module: restya-board 2017-11-22 12:14:24 +01:00
Jan Tojnar c47ea8ca4e
nixos/services.fwupd: init 2017-11-17 18:54:45 +01:00
Parnell Springmeyer cb11bf73a5 nixos/nghttpx: add module for the nghttpx proxy server (#31680)
* nghttpx: Add a new NixOS module for the nghttpx proxy server

This change also adds a global `uid` and `gid` for a `nghttpx` user
and group as well as an integration test.

* nixos/nghttpx: fix building manual
2017-11-16 18:21:02 +00:00
Jan Tojnar e1b8636181
dleyna-server: init at 0.6.0 2017-11-15 14:02:37 +01:00
Jan Tojnar a04cfdea12
dleyna-renderer: init at 0.6.0 2017-11-15 14:02:37 +01:00
Tom Smeets 81295c479d fractalart service: init, Generate wallpapers (#23231)
* Add a service for generating wallpapers
This service will generate a new wallpaper using the "FractalArt" haskell package.
2017-11-13 19:56:08 +01:00
Vaibhav Sagar eece8755d1 ihaskell: re-enable 2017-11-06 09:58:28 +01:00
Markus Mueller 4874862732
babeld module: init 2017-11-05 21:15:23 +01:00
Bas van Dijk c894327215 postage: replaced by pgmanage-10.0.2
postage is no longer maintained and has been replaced by the identical pgmanage. See:

https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage

The following error is raised when a user enables the deprecated `services.postage.enable` option:

Failed assertions:
- services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
2017-11-03 00:14:00 +01:00
Christopher Singley 95dc36235c PlexPy service 2017-10-29 19:29:25 -05:00
edef ea35bc94bf nixos/ecryptfs: init
Currently, ecryptfs support is coupled to `security.pam.enableEcryptfs`, but one
might want to use ecryptfs without enabling the PAM functionality. This commit
splits it out into a `boot.supportedFilesystems` switch.
2017-10-20 17:42:04 +01:00
Joachim F 3c62474d08 Merge pull request #30528 from disassembler/gitea
gitea: init at 1.2.1
2017-10-20 14:01:54 +00:00
Joachim F 5f1d6bc5c7 Merge pull request #30563 from michaelpj/imp/tzupdate
tzupdate: init at 1.2.0 (+ service)
2017-10-20 13:55:09 +00:00
Joerg Thalheim f8085cb1dd nixos/sway: add module 2017-10-19 10:46:31 -04:00
Michael Peyton Jones 281bf1dded tzupdate service: init 2017-10-19 05:15:32 +01:00
Samuel Leathers 66201d49bb gitea: add nixos service module 2017-10-18 12:50:36 -04:00
Silvan Mosberger f3df7da4f9
usbmuxd service: init 2017-10-17 18:55:57 +02:00
Peter Hoeg b366760cf5 Revert "hyperv-daemons: add nixos module"
This reverts commit 0944d44f1b.
2017-10-14 14:42:49 +08:00
Peter Hoeg 2b5aab4b0f Revert "sensu: nixos module"
This reverts commit 707c3ac435.
2017-10-14 14:42:49 +08:00
Peter Hoeg 8df1c9ac17 Revert "firewalld: init at 0.4.4.4"
This reverts commit 178a96f99b.
2017-10-14 14:42:48 +08:00
Peter Hoeg 178a96f99b firewalld: init at 0.4.4.4
Includes systemd module.
2017-10-14 14:38:04 +08:00
Peter Hoeg 707c3ac435 sensu: nixos module 2017-10-14 14:38:04 +08:00
Peter Hoeg 0944d44f1b hyperv-daemons: add nixos module 2017-10-14 14:38:04 +08:00
Dan Peebles 56e18c50cc Revert "Simple proof of concept for how to do other types of services"
This reverts commit 7c3253e519.

I included this in another push by accident and never intended for it to
be in mainline. See https://github.com/NixOS/nixpkgs/pull/26075 if you
want more.
2017-10-13 09:17:13 -04:00
Franz Pletz e13d0c3435 Merge pull request #30172 from mayflower/cleanup/firmware-modules
nixos: clean up wifi firmware & default kernel modules
2017-10-12 16:32:01 +02:00
Peter Hoeg c640e790d5 pykms: nixos module 2017-10-12 08:51:34 +08:00
Pascal Bach aad88ddf5b prometheus-minio-exporter service: init version 2017-10-08 12:47:00 +02:00
Franz Pletz 3df126dbf7
nixos/modules: clean up wireless firmware options
All available options were just enabling
hardware.enableRedistributableFirmware. There were nix files without
modules which weren't referenced anywhere.
2017-10-07 01:48:02 +02:00
Jörg Thalheim b8288f137f Merge pull request #29865 from hamhut1066/traefik-module
nixos/traefik create service
2017-10-04 11:53:11 +01:00
Hamish Hutchings 2e5297217d nixos/traefik create service 2017-10-04 11:26:39 +01:00
Jörg Thalheim 0b18fa4f09 Merge pull request #30014 from eqyiel/krb5-fixes
nixos/krb5: complete rewrite
2017-10-03 11:04:58 +01:00
Joachim F cb3d443787 Merge pull request #29452 from jerith666/pfix-srsd-1709
nixos/pfix-srsd: add module
2017-10-03 00:51:59 +00:00
Ruben Maher 06e15e59f9 nixos/krb5: complete rewrite
The `krb5` service was a bit lacking.

Addresses NixOS/nixpkgs#11268, partially addresses NixOS/nixpkgs#29623.
2017-10-02 14:30:19 +10:30
Joerg Thalheim 44b6a1509d nixos/bcc: init module
Looks trival, but it is easy to make the mistake
to add linuxPackages.bcc to systemPackages,
which breaks if the not the default kernel is used.
2017-09-29 15:18:25 +01:00
Joerg Thalheim 5572062674 nixos/sysdig: init module 2017-09-29 15:01:21 +01:00
Joachim F ffd6cbe3d1 Merge pull request #28503 from phile314/fusion-inventory
Fusion inventory: Init at 2.3.18
2017-09-25 12:58:44 +00:00
Philipp Hausmann 6b788e36df FusionInventory: Add NixOS module. 2017-09-25 10:39:11 +02:00
Jörg Thalheim 975c7b2204 Merge pull request #29450 from jerith666/djb-1709
Add modules for tinydns and dnscache from djbdns
2017-09-24 15:39:29 +01:00
Jaka Hudoklin ddf5de5de0 kubernetes module: refactor module system, kube-dns as module 2017-09-24 11:44:25 +02:00
Matej Cotman ed322f4235 kubernetes: update service 2017-09-24 11:44:25 +02:00
Jaka Hudoklin ac775ac6dd Merge pull request #21077 from xtruder/nixos/programs/npm/add
npm module: add npm module for global npm config
2017-09-23 20:35:58 +02:00
Jaka Hudoklin 948f4a9c6d npm module: add npm as nixos program 2017-09-23 20:34:55 +02:00
Robin Gloster 08b09fdc5c
fanctl, fan module: remove
This has been broken nearly all the time due to the patches needed to
iproute2 not being compatible with the newer versions we have been
shipping. As long as Ubuntu does not manage to upstream these changes
so they are maintained with iproute2 and we don't have a maintainer
updating these patches to new iproute2 versions it is not feasible to
have this available.
2017-09-23 17:55:33 +02:00
Matt McHenry 0ece5fc509 nixos/pfix-srsd: add module 2017-09-21 21:44:55 -04:00
Matt McHenry 1b7e5eaa79 nixos/dnscache: add module
with improvements suggested by Jörg Thalheim <joerg@thalheim.io>
2017-09-19 21:24:58 -04:00
Matt McHenry ab851b63da nixos/tinydns: add module
with improvements suggested by Jörg Thalheim <joerg@thalheim.io>
2017-09-19 20:57:41 -04:00
Justin Humm b5a5d0ba84 gollum service: init 2017-09-18 11:55:00 +02:00
Franz Pletz 275914323b Merge pull request #27256 from bachp/squid-service
squid service: initial service based on default config
2017-09-17 18:52:53 +02:00
Jaka Hudoklin 1adaad1371 Merge pull request #28927 from xtruder/nixos/logkeys/init
logkeys module: init
2017-09-16 16:23:13 +02:00
Joachim F c0616a3234 Merge pull request #28892 from ryantm/matterbridge2
matterbridge, modules/matterbridge: init at 1.1.0
2017-09-16 12:43:35 +00:00
Jörg Thalheim 13edd9765a Merge pull request #29125 from geistesk/firehol-3.1.4
firehol: init at 3.1.4, iprange: init at 1.0.3
2017-09-13 18:10:22 +01:00
Pascal Bach 334e23d244 nixos/prometheus-collectd-exporter: init module (#29212)
* prometheus-collectd-exporter service: init module

Supports JSON and binary (optional) protocol
of collectd.

* nixos/prometheus-collectd-exporter: submodule is not needed for collectdBinary
2017-09-11 19:17:00 +01:00
Ryan Mulligan 9c786d82f2 matterbridge, modules/matterbridge: init at 1.1.0 2017-09-10 08:57:28 -07:00
Pascal Bach 2ed89eddf3 squid service: intial service based on default config 2017-09-09 12:44:46 +02:00
geistesk 2316f16ac0 nixos/fireqos: add service 2017-09-09 00:29:46 +02:00
Michael Alan Dorman cd283e9234 mfi: Remove remaining reference to mfi.nix
This file was removed in 6f0b538044, but sufficient care was not taken
to remove all references to it.  Without this change, trying to
rebuild nixos fails.
2017-09-08 14:33:45 +02:00
Michele Catalano 4ea1d49643 nexus: Add module for nexus.
Add also myself as maintainer
Add simple test of the nexus service
2017-09-04 22:32:02 +02:00
Jörg Thalheim 4391330033 Merge pull request #28893 from jtojnar/gpaste-service
gnome3.gpaste: Add GPaste service
2017-09-03 16:27:30 +01:00
The Admin cdb0038052 logkeys module: init 2017-09-03 12:52:57 +02:00
Joachim Fasting 268eb4adb7
nixos: purge remaining grsecurity bits
:(

Fixes https://github.com/NixOS/nixpkgs/issues/28859
2017-09-02 20:35:24 +02:00
Jan Tojnar 6ca6ea9e23
nixos/gnome3.gpaste: add service 2017-09-02 17:43:01 +02:00
Jörg Thalheim 7b20952c04 Merge pull request #28726 from vyp/interception-tools
interception-tools: init at 0.1.1
2017-09-02 08:24:57 +01:00
xd1le e0b44a09b8 interception-tools: init at 0.1.1
The latest release of libyamlcpp in nixpkgs does not build because it
uses an older version of boost than the one in nixpkgs and therefore
expects a particular header file which does not exist in the latest
boost anymore. For this reason, a later (git) version of libyamlcpp is
used here (which actually doesn't even require boost).

The substituteInPlace in the prePatch phase is needed because libevdev
places its headers in non-standard places, meaning Nix cannot normally
find them. The `cut` command removes the first two "-I" characters from
the output of `pkg-config`. This needs to be in the prePatch phase
because otherwise Nix will patch these lines to `/var/empty`, meaning
you would have less specific replacement (in case other lines are also
patched to `/var/empty`).

I wrote the patch. (I believe it is NixOS specific.)
2017-09-02 16:17:53 +10:00
davidak 8f389f3316 nixos/bcachefs: init module 2017-08-31 05:39:31 -05:00
Graham Christensen 128cdeffd0
compiz: drop 2017-08-30 06:59:20 -04:00
Tim Steinbach ae742fa495
frandom: Remove 2017-08-29 20:01:25 -04:00
Joachim F 1715436b75 Merge pull request #27833 from volth/hpsa-2.40
nixos/hardware/raid/hpsa: init at 2.40
2017-08-26 23:10:57 +00:00
Phil 4f2935390e nixos/usbguard: create package and module (#28363)
* nixos/usbguard: create package and module

No usbguard module or package existed for NixOS previously. USBGuard
will protect you from BadUSB attacks. (assuming configuration is done
correctly)

* nixos/usbguard: remove extra packages

Users can override this by themselves.

* nixos/usbguard: add maintainer and fix style
2017-08-25 23:35:18 +01:00
Jörg Thalheim e861a26b82 Merge pull request #28476 from disassembler/airsonic
airsonic: init at 10.0.0
2017-08-25 23:19:49 +01:00
Philipp Hausmann de1a25cd69 nixos/hail: init (#28442) 2017-08-23 18:23:13 +00:00
Samuel Leathers 85329b96e0 nixos/airsonic: add module 2017-08-23 13:06:28 -04:00
Christian Albrecht 964799e556 sks and pgpkeyserver-lite modules: init (#27515)
* modules sks and pgpkeyserver-lite:
  runs the sks keyserver with optional nginx proxy for webgui.
* Add calbrecht to maintainers
* module sks: fix default hkpAddress value
* module pgpkeyserver-lite: make hkpAddress a string type option
  and use (builtins.head services.sks.hkpAddress) as default value
* module sks: remove leftover service dependencies
2017-08-22 12:27:00 +02:00
Joachim F 3e21f91a39 Merge pull request #27796 from LumiGuide/postage
postage: init at 3.2.17 & add NixOS module
2017-08-13 20:59:06 +00:00
Robin Gloster 79ac09ea06
ripple-rest: remove
marked as broken for > 1 yr, development is frozen and author recommends
moving to https://github.com/ripple/ripple-lib
2017-08-12 13:38:32 +02:00
Volth 3d132be83e nixos/ccache: init 2017-08-11 15:48:45 +00:00
Bas van Dijk ca64eaadf8 postage: init at 3.2.17 & add NixOS module 2017-08-07 20:35:23 +02:00
Robin Gloster dc13376ee2
wvdial: remove 2017-08-04 02:24:07 +02:00
Robin Gloster a4647bc33f
tlsdate: remove
Dead and does not build with openssl 1.1.
Debian has removed it, too.
2017-08-04 02:24:03 +02:00
Volth b998d8e8b7 nixos/hardware/raid/hpsa: init at 2.40 2017-08-01 12:52:04 +00:00
Charles Strahan c1fdf3341b Merge pull request #27347 from cstrahan/osquery-new
osquery: init at 2.5.2
2017-07-24 21:51:10 -04:00
Charles Strahan 53426f6cb9
osquery: init at 2.5.2 2017-07-24 21:47:32 -04:00
Joel Thompson 4b42fc4b8a exhibitor: init at 3.4.9
Initial Exhibitor nix package and nixos module for Netflix's Exhibitor,
which is a manager for Apache Zookeeper.
2017-07-21 09:45:37 -04:00
Franz Pletz 00b6ac7bd3 Merge pull request #26419 from roblabla/feature-sasl
cyrus-sasl: Add saslauthd service and LDAP support
2017-07-20 20:23:52 +02:00
Jörg Thalheim 26f85e4253 Merge pull request #27410 from florianjacob/journalwatch
journalwatch & journalwatch service: init at 1.1.0
2017-07-18 08:19:33 +01:00
Christian Kögler e8a8f1233a snapper: add nixos module
fixes #27154
2017-07-16 10:06:42 +01:00
Florian Jacob 63bb133373 journalwatch & journalwatch service: init at 1.1.0 2017-07-16 00:14:19 +02:00
Charles Strahan c79e0b2ba0 Merge pull request #26907 from volth/vault
vault: 0.6.5 -> 0.7.3 with service
2017-07-11 15:02:29 -04:00
Christian Albrecht ebaff599ba nixos/auditd: init at 2.7.6 (#27261)
#11864 Support Linux audit subsystem
Add the auditd.service as NixOS module to be able to
generate profiles from /var/log/audit/audit.log
with apparmor-utils.

auditd needs the folder /var/log/audit to be present on start
so this is generated in ExecPreStart.

auditd starts with -s nochange so that effective audit processing
is managed by the audit.service.
2017-07-09 17:59:09 +01:00
Vladimír Čunát d1a89ae9d7
Merge branch 'master' into staging 2017-07-03 09:48:58 +02:00
Joachim F c2576ac2d3 Merge pull request #26978 from volth/lighttpd-collectd-submodule
lighttpd: add collectd submodule
2017-07-02 11:49:06 +01:00
Tristan Helmich 97e8422541 heartbeat service: init 2017-07-02 10:45:59 +02:00
Jörg Thalheim 343ad1697d Merge pull request #26897 from layus/nixos-terminfo
terminfo: symlink terminfo to /etc for ncurses
2017-07-01 09:27:24 +01:00
Guillaume Maudoux bd562949cf terminfo: symlink terminfo to /etc for ncurses 2017-06-30 11:17:11 +02:00
Volth 99b8d5ebe6 lighttpd: add collectd submodule 2017-06-29 22:41:22 +00:00
Joachim F 767a8b2e9a Merge pull request #26073 from florianjacob/piwik-package
piwik & piwik service: init at 3.0.4
2017-06-27 20:51:16 +01:00
Katyucha 442f76d72a Vault: 0.6.5 -> 0.7.2 with services 2017-06-27 19:34:12 +00:00
Pascal Bach aa66c9ad37 minio service: add inital service
features:
- change listen port and address
- configure config and data directory
- basic test to check if minio server starts
2017-06-26 04:07:37 +02:00
Samuel Leathers 5d7fd7e7fa mailhog: init at 1.0.0 (#26821)
* mailhog: init at 1.0.0

* formatting nitpicks
2017-06-24 17:05:34 +01:00
Florian Jacob 55844c8380 piwik & piwik service: init at 3.0.4 2017-06-19 16:00:17 +02:00
Edward Tjörnhammar 3dcecf09fc
Remove aiccu package and service due to sunsetting.
https://www.sixxs.net/main/
2017-06-15 06:58:08 +02:00
Maximilian Bosch 3803864ca6 thefuck: init at 3.18 (#26529) 2017-06-14 09:57:38 +01:00
Eelco Dolstra 338cdea332
Merge branch 'master2' of https://github.com/gnidorah/nixpkgs into staging 2017-06-07 11:46:17 +02:00
roblabla c18c50a42e cyrus-sasl: Add saslauthd service support 2017-06-06 12:59:47 +02:00
Kjartan Ovmilk 919b39bb7c
resilio service: replaces btsync service, which is no longer supported upstream. 2017-06-02 21:24:49 +01:00
gnidorah a996fe849f fstrim: Add service 2017-05-30 16:39:27 +03:00
Franz Pletz 04158d9aba
gnupg agent module: init
Creates a systemd user service and updates the tty on new logins so
that gpg-agent may find the current tty even if the SSH agent mode
is used.
2017-05-29 15:05:29 +02:00
Franz Pletz 8ab0501865 Merge pull request #25565 from KaiHa/nitrokey-app-1.0
nitrokey-app: 0.6.3 -> 1.1
2017-05-27 02:43:22 +02:00
Dan Peebles 7c3253e519 Simple proof of concept for how to do other types of services 2017-05-26 18:14:31 -04:00
Franz Pletz 839647e630
nitrokey module: init 2017-05-26 00:47:46 +02:00
Mateusz Kowalczyk 80918692e1 SystemdJournal2Gelf.service: new service 2017-05-25 19:04:40 +01:00
Arseniy Seroka c734781158 Merge pull request #25958 from Mic92/iwd
iwd: init at unstable-2017-04-21
2017-05-22 20:04:04 +03:00
Calum MacRae abe0da425b kbfs service: init (#25610)
* kbfs service: init
2017-05-22 08:14:12 +08:00
Jörg Thalheim a527a47cd3
iwd: init at unstable-2017-04-21 2017-05-21 11:05:35 +01:00
Franz Pletz b411968774
lldpd: init at 0.9.7 2017-05-21 01:16:42 +02:00
Jörg Thalheim 2f22bbe150 Merge pull request #25578 from Ma27/module/xautolock
services.xserver.xautolock: add module
2017-05-19 07:09:10 +01:00
Jörg Thalheim ae12ded6bf Merge pull request #25381 from sargon/nullmailer
nullmailer + service: init at 2.0
2017-05-13 07:13:07 +01:00
Aneesh Agrawal e22ccad978 salt: Add minion service module 2017-05-10 21:26:02 -04:00
Aneesh Agrawal 779ae06467 Add salt master module (#25632)
* salt: 2016.11.2 -> 2016.11.4

* salt: Add master NixOS module
2017-05-09 18:20:35 +01:00
Maximilian Bosch 9d1db321fe
services.xserver.xautolock: add module 2017-05-09 15:02:10 +02:00
montag451 3be53fca60 gnome-disks: add D-Bus service 2017-05-06 19:40:37 +02:00
Rob Vermaas a9f054c834
dd-agent: Add default config files of dd-agent and auto_conf dir
to /etc/dd-agent/conf.d by default, and make sure
/etc/dd-agent/conf.d is used.

Before NixOS 17.03, we were using dd-agent 5.5.X which
used configuration from /etc/dd-agent/conf.d

In NixOS 17.03 the default conf.d location is first used relative,
meaning that $out/agent/conf.d was used without NixOS overrides.

This change implements similar functionality as PR #25288, without
breaking backwards compatibility.

(cherry picked from commit 77c85b0ecbc1070d7adff31b339bede92e4193fa)
2017-05-04 09:47:21 +00:00
jammerful 9f18af5991 Add Shibboleth Service Provider Module 2017-05-02 11:29:58 -04:00
Daniel Ehlers 4338f096f5 nullmailer + service: init at 2.0 2017-05-02 01:46:12 +02:00
Michael Raskin 4d2f7b63e0 Merge pull request #24803 from pajowu/master
browserpass: init at 1.0.2
2017-05-01 11:27:17 +02:00
Michael Raskin 90ce1aa28a Merge branch 'master' into clickhouse 2017-05-01 07:33:31 +02:00
Michael Raskin 1c8d388201 Merge pull request #23865 from volth/xrdp-tests
xrdp: init at 0.9.2
2017-04-30 22:35:48 +02:00
Michael Raskin d5ec7bc748 Merge pull request #23697 from sargon/master
sshguard + service: init at 2.0.0
2017-04-30 21:43:12 +02:00
Michael Raskin eedc0f0a78 Merge pull request #23333 from romildo/upd.qt5ct
qt5ct: 0.24 -> 0.30
2017-04-30 19:42:31 +02:00
Joachim Fasting 878ad1ce6e
nixos: add option to lock kernel modules
Adds an option `security.lockKernelModules` that, when enabled, disables
kernel module loading once the system reaches its normal operating state.

The rationale for this over simply setting the sysctl knob is to allow
some legitmate kernel module loading to occur; the naive solution breaks
too much to be useful.

The benefit to the user is to help ensure the integrity of the kernel
runtime: only code loaded as part of normal system initialization will be
available in the kernel for the duration of the boot session.  This helps
prevent injection of malicious code or unexpected loading of legitimate
but normally unused modules that have exploitable bugs (e.g., DCCP use
after free CVE-2017-6074, n_hldc CVE-2017-2636, XFRM framework
CVE-2017-7184, L2TPv3 CVE-2016-10200).

From an aestethic point of view, enabling this option helps make the
configuration more "declarative".

Closes https://github.com/NixOS/nixpkgs/pull/24681
2017-04-30 12:05:37 +02:00
volth dad760061e xrdp: init at 0.9.1 2017-04-29 17:23:35 +00:00
Orivej Desh 8f634a78b9 clickhouse: init at 1.1.54190 2017-04-27 13:25:58 +00:00
Maximilian Bosch 0a12aafde4 zsh-syntax-highlighting: Add more configuration options and move to module (#25153)
* programs.zsh: factor zsh-syntax-highlighting out into its own module

* programs.zsh.syntax-highlighting: add `highlighters` option

* programs.zsh: document BC break introduced by moving zsh-syntax-completion into its own module
2017-04-23 21:17:31 +02:00
Maximilian Bosch 9ec64d2890 oh-my-zsh: add module (#25140)
* programs.zsh: add enableOhMyZsh option to automate setup of oh-my-zsh in global zshrc

* programs.zsh: make oh-my-zsh plugins configurable

* programs.zsh: add ohMyZshCustom option

* programs.zsh: add ohMyZshTheme option

* programs.zsh: applying minor fixes to evaluate expressions properly

* programs.zsh: fix ordering of oh-my-zsh config and execution

* programs.zsh: move all oh-my-zsh params into its own scope named programs.zsh.oh-my-zsh
2017-04-23 13:58:07 +02:00
Marius Bergmann 6572f5e81b keepalived service: init (#22755) 2017-04-20 12:50:59 +01:00
Jörg Thalheim 002a2b479a Merge pull request #24486 from srp/master
slock needs suid privileges
2017-04-16 21:40:21 +02:00
Jörg Thalheim b9d9083322
powertop: add module 2017-04-15 15:17:02 +02:00
pajowu 857a3b872c browserpass: init at 1.0.2 2017-04-10 20:06:53 +02:00
Michael Raskin 861726579b Merge pull request #24008 from phile314/slimserver
slimserver: Init at 7.9.0 (pkg + module)
2017-04-08 17:43:41 +02:00
Aristid Breitkreuz 4ca22140d9 Merge pull request #24669 from gnidorah/master2
autorandr: 53d29f9 -> 855c18b and module
2017-04-08 12:17:57 +02:00
Jaka Hudoklin 43880af56f Merge pull request #23135 from ljli/earlyoom-service-init
earlyoom service: init
2017-04-06 23:31:28 +02:00
gnidorah ca733de964 autorandr: 53d29f9 -> 855c18b and module 2017-04-06 13:28:40 +03:00
Scott R. Parish 7138b55918
slock: needs the ability to be install with suid privileges 2017-03-30 14:36:53 -07:00
Robin Gloster 8a18e1f7f1
quagga service: disable 2017-03-30 16:23:33 +02:00
Robin Gloster a79891f6b2
sitecopy: remove 2017-03-30 12:06:09 +02:00
romildo 2630e7384f qt5ct: add a nixos module to enable qt5ct
In order to use qt5ct (Qt5 Configuration Tool) to configure Qt5
settings (theme, font, icons, etc.) under DE/WM without Qt
integration, the environment variable QT_QPA_PLATFORMTHEME should be
set to "qt5ct".

It can be done automatically by this module, or by setting the
variable explicitly in the user or in the system configuration.
2017-03-29 06:17:23 -03:00
Daniel Ehlers 20a5b5bead sshguard: new package 2017-03-26 14:46:22 +02:00
Edward Tjörnhammar b35d22b30c
radarr: init at 0.2.0.553 + nixos module 2017-03-25 21:19:55 +01:00
Edward Tjörnhammar 2db5c5cfe2
jackett: init at 0.7.1197 + nixos module 2017-03-25 21:19:44 +01:00
Leon Isenberg db30cff500 earlyoom service: init 2017-03-24 23:16:16 +01:00
Thomas Tuegel 1b0d9e9ae6 Merge pull request #23819 from ttuegel/freetype
FreeType 2.7.1 and Fontconfig defaults
2017-03-20 11:43:50 -05:00
Joachim F 9a976c09ba Merge pull request #23963 from dtzWill/feature/irkerd
irker: init at 2017-02-12
2017-03-18 00:35:32 +01:00
Thomas Tuegel 354ea69ae4
fontconfig-penultimate: init at 0.2
Also provides a NixOS module.
2017-03-17 13:50:05 -05:00
Pascal Bach 3728143cbc prometheus-unifi-exporter: init at 0.4.0 2017-03-17 15:41:22 +01:00
Will Dietz 2807d75dca irkerd service: init 2017-03-17 09:16:32 -05:00
Philipp Hausmann 45d8d6ebeb Add slimserver nixos module 2017-03-16 20:43:09 +01:00
Pascal Bach a8cca7037e prometheus-fritzbox-exporter: init at 1.0 2017-03-15 17:22:36 +01:00
Peter Hoeg 80750f459c Merge pull request #17303 from peterhoeg/iio
iio-sensor-proxy: init at 2.2 and nixos module
2017-03-14 11:16:09 +08:00
Jaka Hudoklin f5d81ed79b Merge pull request #20904 from offlinehacker/nixos/xserver/xpra
Add xpra display-manager
2017-03-05 01:32:23 +01:00
Graham Christensen 1430506666
mcelog: init Machine Check Exception Logging Daemon service 2017-02-26 11:42:00 -05:00
Jookia e2c95b46e5
nftables module: Add new module for nftables firewall settings
fixes #18842
2017-02-26 13:41:14 +01:00
Peter Hoeg e4d8cb8dab iio-sensor-proxy: init at 2.2 and nixos module
This PR adds support for ```iio-sensor-proxy``` used by GNOME v3 and
others for reading data from the accelerometer, gps, compass and similar sensors
built into some relatively recent laptops.

Additionally, there is a NixOS module exposed via hardware.sensor.iio
for enabling services, udev rules and dbus services.
2017-02-25 08:46:46 +08:00
Robin Gloster 940492cef5 Merge pull request #22634 from Ekleog/dhparams
dhparams module: initialize
2017-02-23 17:16:04 +01:00
Peter Hoeg 8e5b630b49 Merge pull request #22264 from peterhoeg/m/modeswitch
usb-modeswitch: 2.2.1 -> 2.5.0 and nixos module
2017-02-21 16:49:04 +08:00
Peter Hoeg 0789a2a4d6 usb-wwan: nixos module 2017-02-21 16:35:27 +08:00
Robin Gloster 12b4556642 Merge pull request #22882 from bjornfor/wireshark
nixos: add programs.wireshark option
2017-02-20 14:03:30 +01:00
Cray Elliott 5e0b978eff mwprocapture: init at 1.2.3269 (#22160) 2017-02-18 15:44:31 +01:00
Léo Gaspard e2c78910d1
dhparams module: initialize 2017-02-18 00:07:03 +01:00
Robin Gloster bd0d8ed807
programs.mtr: init setcap-wrapper 2017-02-17 20:18:19 +01:00
Bjørn Forsman 8f3e6fdd8c
nixos: add programs.wireshark option
To be able to use Wireshark as an ordinary user, the 'dumpcap' program
must be installed setuid root. This module module simplifies such a
configuration to simply:

  programs.wireshark.enable = true;

The setuid wrapper is available for users in the 'wireshark' group.

Changes v1 -> v2:
  - add "defaultText" to the programs.wireshark.package option (AFAIK,
    that prevents the manual from being needlessly rebuilt when the
    package changes)
2017-02-17 15:42:54 +01:00
Parnell Springmeyer fb6d13c01a
Addressing feedback and fixing a bug 2017-02-14 07:38:45 -06:00