Commit graph

352 commits

Author SHA1 Message Date
Graham Christensen 9f31fe81aa
nixos: zfs: correct the networking.hostId error message
Users were confused that the error message said config.networking.hostId, and indeed that did nothing to fix their problem.

Update the error message to specify the option they should actually set.
2017-12-20 17:56:03 -05:00
Florian Jacob fc21593352 nixos/btrfs: add services.btrfs.autoScrub
for automatic regular scrubbing of mounted btrfs filesystems,
similar to what's already there for zfs.
2017-12-13 11:00:28 +01:00
Florian Jacob fe3751df8a nixos/network-interfaces: Add " around network interface names
in assertion messages to avoid misinterpretations when the interface name contains a dot.
2017-11-09 20:27:33 +01:00
Jörg Thalheim 8d145da64a
Merge pull request #30127 from florianjacob/limit_interface_name_length
nixos/network-interfaces: assertion for too long interface names
2017-11-08 20:35:08 +00:00
Bas van Dijk 07e0c0e0a2 network-interfaces-scripted: fix NixOS/nixops#640
Reverse the PartOf dependency between network-setup and network-addresses-*

This was joint work of: @nh2, @domenkozar, @fpletz, @aszlig and @basvandijk
at the NixCon 2017 hackathon.
2017-10-30 20:45:32 +01:00
Franz Pletz 666d9c09c1 Merge pull request #30339 from pvgoran/fileSystems-silentFormatOptions
filesystems: use non-interactive formatOptions by default
2017-10-25 10:46:46 +02:00
edef ea35bc94bf nixos/ecryptfs: init
Currently, ecryptfs support is coupled to `security.pam.enableEcryptfs`, but one
might want to use ecryptfs without enabling the PAM functionality. This commit
splits it out into a `boot.supportedFilesystems` switch.
2017-10-20 17:42:04 +01:00
lassulus 77be4d91f7 encrypted devices: provide working example 2017-10-16 17:46:46 +02:00
lassulus f804a8ff98 encrypted devices: don't override default cryptoModules 2017-10-16 17:46:06 +02:00
Pavel Goran e3f97e514d filesystems: use non-interactive formatOptions by default
When autoFormat is enabled, in order to successfully create a filesystem,
certain filesystems require specific options to be passed to mkfs to prevent
it from asking questions. This commit sets default formatOptions to "-q"
for "jfs" and "reiserfs" filesystems for this purpose.

Resolves #29140.
2017-10-12 09:53:43 +07:00
Jörg Thalheim b256b2778a Merge pull request #30204 from lheckemann/powertop-fix
powertop module: add kmod to path
2017-10-07 22:06:46 +01:00
Linus Heckemann fadb906b2f powertop module: add kmod to path
powertop attempt to load some kernel modules like msr by calling
modprobe. This is the counterpart to
88e43eb39b which has the powertop
executable search PATH for modprobe rather than hardcoding /sbin, and
actually adds the directory containing modprobe to its PATH for the
systemd service.
2017-10-07 21:48:50 +01:00
Tuomas Tynkkynen e86b78363d nixos/filesystems/ext: Don't try to load ext3 module
This module doesn't exist since v4.3, where the ext3 driver was removed
as ext4.ko can mount ext3 filesystems as well.
2017-10-07 11:01:01 +03:00
Florian Jacob 6091e2aa33 nixos/network-interfaces: assertion for too long interface names 2017-10-05 15:49:49 +02:00
Rok Garbas 748ef34f09 assertion should check for encrypted.label of the defined fileSystem 2017-09-29 19:55:28 +02:00
Franz Pletz d0435ba032
network-interfaces: device routes for default gateway
Iff interface is set, it makes sense to add device route by default.
2017-09-28 02:14:07 +02:00
Franz Pletz 0ee866ed72
kbd service: systemd-vconsole-setup is triggered by udev
cc #22470
2017-09-27 23:38:29 +02:00
Alexander Ried 4a2442032e Revert "kbd service: use /dev/tty1 for systemd-vconsole-setup"
This reverts commit 0c81594a29.

It's no longer needed since systemd-vconsole-setup enumerates all ttys
until it finds a suitable one since systemd v234.
2017-09-27 23:37:24 +02:00
Jörg Thalheim 9164517c18 nixos/zfs: import encrypted datasets by default for zfsUnstable 2017-09-26 09:08:53 +01:00
Franz Pletz 263185aa68
nixos/network-interfaces: ensure slave interfaces are up
Fixes #28620.
2017-09-25 14:06:38 +02:00
Franz Pletz 13a110e696
nixos/network-interfaces: cannot delay device units
Systemd is complaining that it can't delay the startup of device units.
We have a before dependency on the respective device unit for every
netdev service, which doesn't make any sense because we create the
actual interface in this service.
2017-09-25 14:06:38 +02:00
Franz Pletz 3a670daa98
nixos/network-interfaces: IPs must always be set
Previously, depending on the environment and the type of interface that
was created, the configured IPs of an interface wouldn't be applied on a
nixos-rebuild switch. It works after a reboot.

This patch ensures that the network-addresses service is started
either via the network-link service or if the networking target is
activated (i.e. on system activation).

Fixes #28474 #16230.
2017-09-25 14:06:38 +02:00
Silvan Mosberger eca23233b2 encrypted devices: add label set assertion (#29651) 2017-09-23 19:02:16 +01:00
Peter Simons 99f759de1c Revert "nixos: add option for bind to not resolve local queries (#29503)"
This reverts commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6. The change
added in this commit was controversial when it was originally suggested
in https://github.com/NixOS/nixpkgs/pull/29205. Then that PR was closed
and a new one opened, https://github.com/NixOS/nixpkgs/pull/29503,
effectively circumventing the review process. I don't agree with this
modification. Adding an option 'resolveLocalQueries' to tell the locally
running name server that it should resolve local DNS queries feels
outright nuts. I agree that the current state is unsatisfactory and that
it should be improved, but this is not the right way.

(cherry picked from commit 23a021d12e8f939cd0bfddb1c7adeb125028c1e3)
2017-09-23 16:41:34 +02:00
Jörg Thalheim 42be8dbe15 Merge pull request #29344 from Moredread/fix/fileystem-encrypted-keyfile-missing-initrd-support
nixos/fileystems: Fix boot fails with encrypted fs
2017-09-22 12:46:17 +01:00
Jörg Thalheim 743848bb46 Merge pull request #29581 from eqyiel/fix-rpc-gssd
nixos/nfs: allow setting the path to krb5.keytab
2017-09-22 01:41:10 +01:00
Michael Weiss 351f5fc585 fuse3: init at 3.1.1
This includes fuse-common (fusePackages.fuse_3.common) as recommended by
upstream. But while fuse(2) and fuse3 would normally depend on
fuse-common we can't do that in nixpkgs while fuse-common is just
another output from the fuse3 multiple-output derivation (i.e. this
would result in a circular dependency). To avoid building fuse3 twice I
decided it would be best to copy the shared files (i.e. the ones
provided by fuse(2) and fuse3) from fuse-common to fuse (version 2) and
avoid collision warnings by defining priorities. Now it should be
possible to install an arbitrary combination of "fuse", "fuse3", and
"fuse-common" without getting any collision warnings. The end result
should be the same and all changes should be backwards compatible
(assuming that mount.fuse from fuse3 is backwards compatible as stated
by upstream [0] - if not this might break some /etc/fstab definitions
but that should be very unlikely).

My tests with sshfs (version 2 and 3) didn't show any problems.

See #28409 for some additional information.

[0]: https://github.com/libfuse/libfuse/releases/tag/fuse-3.0.0
2017-09-21 23:59:46 +02:00
Ruben Maher 98a2316166 nfs-utils: set /etc/krb5.keytab as default path for rpc-gssd
Currently the `rpc-gssd.service` has a `ConditionPathExists` clause that can
never be met, because it's looking for stateful data inside `/nix/store`.

`auth-rpcgss-module.service` also only starts if this file exists.

Fixes NixOS/nixpkgs#29509.
2017-09-20 15:36:26 +01:00
gwitmond bd52618c9d
nixos: add option for bind to not resolve local queries (#29503)
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.

The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.

This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.

Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.

(cherry picked from commit 670b4e29adc16e0a29aa5b4c126703dcca56aeb6)

This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
2017-09-18 22:54:29 +02:00
Franz Pletz b179908414
nixos/networking: network is online if default gw set
Previously services depending on network-online.target would wait until
dhcpcd times out if it was enabled and a static network address
configuration was used. Setting the default gateway statically is enough
for the networking to be considered online.

This also adjusts the relevant networking tests to wait for
network-online.target instead of just network.target.
2017-09-18 14:51:38 +02:00
Jörg Thalheim 1ecf3e862f zfsUnstable: init at 2017-09-12 2017-09-15 17:59:37 +02:00
André-Patrick Bubel 2000fba561
nixos/fileystems: Fix boot fails with encrypted fs
Boot fails when a keyfile is configured for all encrypted filesystems
and no other luks devices are configured. This is because luks support is only
enabled in the initrd, when boot.initrd.luks.devices has entries. When a
fileystem has a keyfile configured though, it is setup by a custom
command, not by boot.initrd.luks.

This commit adds an internal config flag to enable luks support in the
initrd file, even if there are no luks devices configured.
2017-09-14 05:27:41 +02:00
davidak 8f389f3316 nixos/bcachefs: init module 2017-08-31 05:39:31 -05:00
Jörg Thalheim 5d4a54ca4d network-interfaces-scripted: don't add 'lo' as device dependency
systemd does not create device units for loopback devices,
since they are not physical.
2017-08-30 13:01:47 +02:00
Richard Yang 64994b3638 tasks/filesystems: Make sure /dev/pts/ptmx is 0666 (#28490)
This is required for running commands likes screen and tmux, especially inside containers.

See also : https://www.kernel.org/doc/Documentation/filesystems/devpts.txt
2017-08-30 01:50:29 +02:00
Robin Gloster 2799a94963
zfs, spl: 0.6.5.11 -> 0.7.0 2017-07-27 19:00:54 +02:00
Joachim F 0b7c4c1900 Merge pull request #26170 from kirelagin/wlan-fix
wirelessInterfaces: Add a missing parameter
2017-06-17 15:31:22 +01:00
Bjørn Forsman 5b48368386 nixos/bcache: add services.udev.packages = [ bcache-tools ]
Adds /dev/disk/by-{id,label}/* symlinks for bcache device nodes, in the
final rootfs.

Symlinks will only be created for bcache devices that contain
filesystems. So if you have a blank bcache device or run LVM on top of
bcache you will not get this kind of symlink.
2017-06-10 17:10:49 +02:00
Kirill Elagin b1f56b8b0c wirelessInterfaces: Add a missing parameter 2017-05-28 09:34:43 +03:00
Matthew Maurer b0ec4b8cc7 typo: powerManagment -> powerManagement (#25813) 2017-05-16 18:22:44 +02:00
Jörg Thalheim 6b0d8027ef
zfs: zed service is now called zfs-zed
fixes #25566
2017-05-07 10:22:14 +01:00
Ismaïl Senhaji 9497aec292 Add Elantech ETPS/2 Trackpoint (ThinkPad Yoga 260) 2017-04-22 13:42:57 +02:00
Markus Mueller 5042e9d009
network-interfaces-scripted: Add static parameter for default gateway 2017-04-16 22:59:53 +02:00
Jörg Thalheim b9d9083322
powertop: add module 2017-04-15 15:17:02 +02:00
0xABAB 58fbf4a44e nixos/filesystems: skip filesystem check for bindfs (#24671)
Bindfs (FUSE) provides a pseudo-filesystem and as such does not benefit from a file system check.
2017-04-06 12:35:25 +01:00
Eelco Dolstra 01dbf03628
network-link-*.service: Set stopIfChanged = false
This reduces the time window during which IP addresses are gone during
switch-to-configuration. A complication is that with stopIfChanged =
true, preStop would try to delete the *new* IP addresses rather than
the old one (since the preStop script now runs after the switch to the
new configuration). So we now record the actually configured addresses
in /run/nixos/network/addresses/<interface>. This is more robust in
any case.

Issue https://github.com/NixOS/nixops/issues/640.
2017-04-04 15:13:49 +02:00
Arnold Krille 68729958e8
network-interfaces: reload bridges on conf changes
And adopt the tests to add an interface and remove it again.

It should work when deactivating rstp, it will not work when activating
rstp for the first bridge as then the userspace daemon is not yet
available. But once one bridge is active with stp, it should work with
the reload for any further bridge.

Fixes #21745. Also see #22547.
2017-03-26 18:47:43 +02:00
Robin Gloster 6b8ad8b581
networkd: fix setting both defaultGateway{,6} 2017-03-25 14:30:05 +01:00
Franz Pletz fb50cde71e
nixos/treewide: systemd.time is in manvolume 7
cc #23396
2017-03-21 08:28:53 +01:00
Franz Pletz 9536169074
nixos/treewide: remove boolean examples for options
They contain no useful information and increase the length of the
autogenerated options documentation.

See discussion in #18816.
2017-03-17 23:36:19 +01:00