set -e test -z $NIX_GCC && NIX_GCC=@gcc@ if [ -z ${system##*cygwin*} ]; then PATH_DELIMITER=';' else PATH_DELIMITER=':' fi addToSearchPathWithCustomDelimiter() { local delimiter=$1 local varName=$2 local needDir=$3 local addDir=${4:-$needDir} local prefix=$5 if [ -d $prefix$needDir ]; then if [ -z ${!varName} ]; then eval export ${varName}=${prefix}$addDir else eval export ${varName}=${!varName}${delimiter}${prefix}$addDir fi fi } addToSearchPath() { addToSearchPathWithCustomDelimiter "${PATH_DELIMITER}" "$@" } # Set up the initial path. PATH= for i in $NIX_GCC @initialPath@; do PATH=$PATH${PATH:+:}$i/bin done if test "$NIX_DEBUG" = "1"; then echo "Initial path: $PATH" fi # Execute the pre-hook. export SHELL=@shell@ if test -z "$shell"; then export shell=@shell@ fi param1=@param1@ param2=@param2@ param3=@param3@ param4=@param4@ param5=@param5@ if test -n "@preHook@"; then source @preHook@ fi # Check that the pre-hook initialised SHELL. if test -z "$SHELL"; then echo "SHELL not set"; exit 1; fi # Hack: run gcc's setup hook. envHooks=() if test -f $NIX_GCC/nix-support/setup-hook; then source $NIX_GCC/nix-support/setup-hook fi # Ensure that the given directories exists. ensureDir() { local dir for dir in "$@"; do if ! test -x "$dir"; then mkdir -p "$dir"; fi done } installBin() { ensureDir $out/bin cp "$@" $out/bin } assertEnvExists(){ if test -z "${!1}"; then msg=${2:-error: assertion failed: env var $1 is required} echo $msg >&2; exit 1 fi } # Called when some build action fails. If $succeedOnFailure is set, # create the file `$out/nix-support/failed' to signal failure, and # exit normally. Otherwise, exit with failure. fail() { exitCode=$? if test "$succeedOnFailure" = 1; then ensureDir "$out/nix-support" touch "$out/nix-support/failed" exit 0 else exit $? fi } # Allow the caller to augment buildInputs (it's not always possible to # do this before the call to setup.sh, since the PATH is empty at that # point; here we have a basic Unix environment). eval "$addInputsHook" # Recursively find all build inputs. findInputs() { local pkg=$1 case $pkgs in *\ $pkg\ *) return 0 ;; esac pkgs="$pkgs $pkg " if test -f $pkg/nix-support/setup-hook; then source $pkg/nix-support/setup-hook fi if test -f $pkg/nix-support/propagated-build-inputs; then for i in $(cat $pkg/nix-support/propagated-build-inputs); do findInputs $i done fi } pkgs="" if test -n "$buildinputs"; then buildInputs="$buildinputs" # compatibility fi for i in $buildInputs $propagatedBuildInputs; do findInputs $i done # Set the relevant environment variables to point to the build inputs # found above. addToEnv() { local pkg=$1 if test "$ignoreFailedInputs" != "1" -a -e $1/nix-support/failed; then echo "failed input $1" >&2 fail fi if test -d $1/bin; then export _PATH=$_PATH${_PATH:+:}$1/bin fi for i in "${envHooks[@]}"; do $i $pkg done } for i in $pkgs; do addToEnv $i done # Add the output as an rpath. if test "$NIX_NO_SELF_RPATH" != "1"; then export NIX_LDFLAGS="-rpath $out/lib $NIX_LDFLAGS" fi # Strip debug information by default. if test -z "$NIX_STRIP_DEBUG"; then export NIX_STRIP_DEBUG=1 export NIX_CFLAGS_STRIP="-g0 -Wl,--strip-debug" fi assertEnvExists NIX_STORE \ "Error: you have an old version of Nix that does not set the NIX_STORE variable. This is required for purity checking. Please upgrade." assertEnvExists NIX_BUILD_TOP \ "Error: you have an old version of Nix that does not set the NIX_BUILD_TOP variable. This is required for purity checking. Please upgrade." # Set the TZ (timezone) environment variable, otherwise commands like # `date' will complain (e.g., `Tue Mar 9 10:01:47 Local time zone must # be set--see zic manual page 2004'). export TZ=UTC # Set the prefix. This is generally $out, but it can be overriden, # for instance if we just want to perform a test build/install to a # temporary location and write a build report to $out. if test -z "$prefix"; then prefix="$out"; fi if test "$useTempPrefix" = "1"; then prefix="$NIX_BUILD_TOP/tmp_prefix"; fi # Execute the post-hook. if test -n "@postHook@"; then source @postHook@ fi PATH=$_PATH${_PATH:+:}$PATH if test "$NIX_DEBUG" = "1"; then echo "Final path: $PATH" fi stripDirs() { local dirs="$1" local stripFlags="$2" local dirsNew= for d in ${dirs}; do if test -d "$prefix/$d"; then dirsNew="${dirsNew} $prefix/$d " fi done dirs=${dirsNew} if test -n "${dirs}"; then echo $dirs find $dirs -type f -print0 | xargs -0 strip $stripFlags || true fi } ###################################################################### # Textual substitution functions. # Some disgusting hackery to escape replacements in Sed substitutions. # We should really have a tool that replaces literal values by other # literal values, without any need for escaping. escapeSed() { local s="$1" # The `tr' hack is to escape newlines. Sed handles newlines very # badly, so we just replace newlines with the magic character 0xff # (377 octal). So don't use that character in replacements :-P echo -n "$1" | tr '\012' '\377' | sed -e 's^\\^\\\\^g' -e 's^\xff^\\n^g' -e 's/\^/\\^/g' -e 's/&/\\&/g' } substitute() { local input="$1" local output="$2" local -a params=("$@") local sedScript=$NIX_BUILD_TOP/.sedargs rm -f $sedScript touch $sedScript local n p pattern replacement varName for ((n = 2; n < ${#params[*]}; n += 1)); do p=${params[$n]} if test "$p" = "--replace"; then pattern="${params[$((n + 1))]}" replacement="${params[$((n + 2))]}" n=$((n + 2)) fi if test "$p" = "--subst-var"; then varName="${params[$((n + 1))]}" pattern="@$varName@" replacement="${!varName}" n=$((n + 1)) fi if test "$p" = "--subst-var-by"; then pattern="@${params[$((n + 1))]}@" replacement="${params[$((n + 2))]}" n=$((n + 2)) fi replacement="$(escapeSed "$replacement")" echo "s^$pattern^$replacement^g" >> $sedScript done sed -f $sedScript < "$input" > "$output".tmp if test -x "$output"; then chmod +x "$output".tmp fi mv -f "$output".tmp "$output" } substituteInPlace() { local fileName="$1" shift substitute "$fileName" "$fileName" "$@" } substituteAll() { local input="$1" local output="$2" # Select all environment variables that start with a lowercase character. for envVar in $(env | sed "s/^[^a-z].*//" | sed "s/^\([^=]*\)=.*/\1/"); do if test "$NIX_DEBUG" = "1"; then echo "$envVar -> ${!envVar}" fi args="$args --subst-var $envVar" done substitute "$input" "$output" $args } ###################################################################### # What follows is the generic builder. nestingLevel=0 startNest() { nestingLevel=$(($nestingLevel + 1)) echo -en "\e[$1p" } stopNest() { nestingLevel=$(($nestingLevel - 1)) echo -en "\e[q" } header() { startNest "$2" echo "$1" } # Make sure that even when we exit abnormally, the original nesting # level is properly restored. closeNest() { while test $nestingLevel -gt 0; do stopNest done } trap "closeNest" EXIT # This function is useful for debugging broken Nix builds. It dumps # all environment variables to a file `env-vars' in the build # directory. If the build fails and the `-K' option is used, you can # then go to the build directory and source in `env-vars' to reproduce # the environment used for building. dumpVars() { if test "$noDumpEnvVars" != "1"; then export > $NIX_BUILD_TOP/env-vars fi } # Redirect stdout/stderr to a named pipe connected to a `tee' process # that writes the specified file (and also to our original stdout). # The original stdout is saved in descriptor 3. startLog() { local logFile=${logNr}_$1 logNr=$((logNr + 1)) if test "$logPhases" = 1; then ensureDir $logDir exec 3>&1 if test "$dontLogThroughTee" != 1; then # This required named pipes (fifos). logFifo=$NIX_BUILD_TOP/log_fifo test -p $logFifo || mkfifo $logFifo startLogWrite "$logDir/$logFile" "$logFifo" exec > $logFifo 2>&1 else exec > $logDir/$logFile 2>&1 fi fi } # Factored into a separate function so that it can be overriden. startLogWrite() { tee "$1" < "$2" & logWriterPid=$! } if test -z "$logDir"; then logDir=$out/log fi logNr=0 # Restore the original stdout/stderr. stopLog() { if test "$logPhases" = 1; then exec >&3 2>&1 # Wait until the tee process has died. Otherwise output from # different phases may be mixed up. if test -n "$logWriterPid"; then wait $logWriterPid logWriterPid= rm $logFifo fi fi } # Utility function: return the base name of the given path, with the # prefix `HASH-' removed, if present. stripHash() { strippedName=$(basename $1); if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then strippedName=$(echo "$strippedName" | cut -c34-) fi } unpackFile() { local file=$1 local cmd header "unpacking source archive $file" 3 case $file in *.tar) tar xvf $file || fail ;; *.tar.gz | *.tgz | *.tar.Z) gzip -d < $file | tar xvf - || fail ;; *.tar.bz2 | *.tbz2) bzip2 -d < $file | tar xvf - || fail ;; *.zip) unzip $file || fail ;; *) if test -d "$file"; then stripHash $file cp -prvd $file $strippedName || fail else if test -n "$findUnpacker"; then $findUnpacker $1; fi if test -z "$unpackCmd"; then echo "source archive $file has unknown type" exit 1 fi eval "$unpackCmd" || fail fi ;; esac stopNest } unpackW() { if test -n "$unpackPhase"; then eval "$unpackPhase" return fi if test -z "$srcs"; then if test -z "$src"; then echo 'variable $src or $srcs should point to the source' exit 1 fi srcs="$src" fi # To determine the source directory created by unpacking the # source archives, we record the contents of the current # directory, then look below which directory got added. Yeah, # it's rather hacky. local dirsBefore="" for i in *; do if test -d "$i"; then dirsBefore="$dirsBefore $i " fi done # Unpack all source archives. for i in $srcs; do unpackFile $i done # Find the source directory. if test -n "$setSourceRoot"; then eval "$setSourceRoot" else sourceRoot= for i in *; do if test -d "$i"; then case $dirsBefore in *\ $i\ *) ;; *) if test -n "$sourceRoot"; then echo "unpacker produced multiple directories" exit 1 fi sourceRoot=$i ;; esac fi done fi if test -z "$sourceRoot"; then echo "unpacker appears to have produced no directories" exit 1 fi echo "source root is $sourceRoot" # By default, add write permission to the sources. This is often # necessary when sources have been copied from other store # locations. if test "dontMakeSourcesWritable" != 1; then chmod -R +w $sourceRoot fi eval "$postUnpack" } unpackPhase() { sourceRoot=. # don't change to user dir homeless shelter if custom unpackSource does'nt set sourceRoot header "unpacking sources" startLog "unpack" unpackW stopLog stopNest cd $sourceRoot } patchW() { if test -n "$patchPhase"; then eval "$patchPhase" return fi if test -z "$patchFlags"; then patchFlags="-p1" fi for i in $patches; do header "applying patch $i" 3 local uncompress=cat case $i in *.gz) uncompress="gzip -d" ;; *.bz2) uncompress="bzip2 -d" ;; esac $uncompress < $i | patch $patchFlags || fail stopNest done } patchPhase() { if test -z "$patchPhase" -a -z "$patches"; then return; fi header "patching sources" startLog "patch" patchW stopLog stopNest } fixLibtool() { sed 's^eval sys_lib_.*search_path=.*^^' < $1 > $1.tmp mv $1.tmp $1 } configureW() { if test -n "$configurePhase"; then eval "$configurePhase" return fi eval "$preConfigure" if test -z "$configureScript"; then configureScript=./configure if ! test -x $configureScript; then echo "no configure script, doing nothing" return fi fi if test -z "$dontFixLibtool"; then for i in $(find . -name "ltmain.sh"); do echo "fixing libtool script $i" fixLibtool $i done fi if test -z "$dontAddPrefix"; then configureFlags="${prefixKey:---prefix=}$prefix $configureFlags" fi echo "configure flags: $configureFlags ${configureFlagsArray[@]}" $configureScript $configureFlags"${configureFlagsArray[@]}" || fail eval "$postConfigure" } configurePhase() { header "configuring" startLog "configure" configureW stopLog stopNest } buildW() { if test -n "$buildPhase"; then eval "$buildPhase" return fi eval "$preBuild" echo "make flags: $makeFlags ${makeFlagsArray[@]} $buildFlags ${buildFlagsArray[@]}" make \ $makeFlags "${makeFlagsArray[@]}" \ $buildFlags "${buildFlagsArray[@]}" || fail eval "$postBuild" } buildPhase() { if test "$dontBuild" = 1; then return fi header "building" startLog "build" buildW stopLog stopNest } checkW() { if test -n "$checkPhase"; then eval "$checkPhase" return fi if test -z "$checkTarget"; then checkTarget="check" fi echo "check flags: $makeFlags ${makeFlagsArray[@]} $checkFlags ${checkFlagsArray[@]}" make \ $makeFlags "${makeFlagsArray[@]}" \ $checkFlags "${checkFlagsArray[@]}" $checkTarget || fail } checkPhase() { if test "$doCheck" != 1; then return fi header "checking" startLog "check" checkW stopLog stopNest } patchELF() { # Patch all ELF executables and shared libraries. header "patching ELF executables and libraries" find "$prefix" \( \ \( -type f -a -name "*.so*" \) -o \ \( -type f -a -perm +0100 \) \ \) -print -exec patchelf --shrink-rpath {} \; stopNest } installW() { if test -n "$installPhase"; then eval "$installPhase" return fi eval "$preInstall" ensureDir "$prefix" if test -z "$installCommand"; then if test -z "$installTargets"; then installTargets=install fi echo "install flags: $installTargets $makeFlags ${makeFlagsArray[@]} $installFlags ${installFlagsArray[@]}" make $installTargets \ $makeFlags "${makeFlagsArray[@]}" \ $installFlags "${installFlagsArray[@]}" || fail else eval "$installCommand" fi eval "$postInstall" } installPhase() { if test "$dontInstall" = 1; then return fi header "installing" startLog "install" installW stopLog stopNest } # The fixup phase performs generic, package-independent, Nix-related # stuff, like running patchelf and setting the # propagated-build-inputs. It should rarely be overriden. fixupW() { if test -n "$fixupPhase"; then eval "$fixupPhase" return fi eval "$preFixup" forceShare=${forceShare:=man doc info} if test -n "$forceShare"; then for d in $forceShare; do if test -d "$prefix/$d"; then if test -d "$prefix/share/$d"; then echo "Both $d/ and share/$d/ exists!" else echo Fixing location of $d/ subdirectory ensureDir $prefix/share if test -w $prefix/share; then mv -v $prefix/$d $prefix/share ln -sv share/$d $prefix fi fi else echo "No $d/ subdirectory, skipping." fi done; fi # TODO : strip _only_ ELF executables, and return || fail here... if test -z "$dontStrip"; then echo "Stripping debuging symbols from files in" stripDirs "${stripDebugList:-lib}" -S echo "Stripping all symbols from files in" stripDirs "${stripAllList:-bin sbin}" -s fi if test "$havePatchELF" = 1 -a -z "$dontPatchELF"; then patchELF "$prefix" fi if test -n "$propagatedBuildInputs"; then ensureDir "$out/nix-support" echo "$propagatedBuildInputs" > "$out/nix-support/propagated-build-inputs" fi if test -n "$setupHook"; then ensureDir "$out/nix-support" substituteAll "$setupHook" "$out/nix-support/setup-hook" fi eval "$postFixup" } fixupPhase() { if test "$dontFixup" = 1; then return fi header "post-installation fixup" startLog "fixup" fixupW stopLog stopNest } distW() { if test -n "$distPhase"; then eval "$distPhase" return fi eval "$preDist" if test -z "$distTarget"; then distTarget="dist" fi echo "dist flags: $distFlags ${distFlagsArray[@]}" make $distFlags "${distFlagsArray[@]}" $distTarget || fail if test "$dontCopyDist" != 1; then ensureDir "$out/tarballs" if test -z "$tarballs"; then tarballs="*.tar.gz" fi # Note: don't quote $tarballs, since we explicitly permit # wildcards in there. cp -pvd $tarballs $out/tarballs fi eval "$postDist" } distPhase() { if test "$doDist" != 1; then return fi header "creating distribution" startLog "dist" distW stopLog stopNest } genericBuild() { header "building $out" if test -n "$buildCommand"; then eval "$buildCommand" return fi if test -z "$phases"; then phases="unpackPhase patchPhase configurePhase buildPhase checkPhase \ installPhase fixupPhase distPhase"; fi for i in $phases; do dumpVars eval "$i" done stopNest } dumpVars