nixpkgs/nixos/doc/manual/development.xml
Eelco Dolstra 8c2dd86fe2 Manual: Fix typo
Fixes #1363.
2013-12-12 10:38:13 +01:00

885 lines
28 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink">
<title>Development</title>
<para>This chapter describes how you can modify and extend
NixOS.</para>
<!--===============================================================-->
<section>
<title>Getting the sources</title>
<para>By default, NixOSs <command>nixos-rebuild</command> command
uses the NixOS and Nixpkgs sources provided by the
<literal>nixos-unstable</literal> channel (kept in
<filename>/nix/var/nix/profiles/per-user/root/channels/nixos</filename>).
To modify NixOS, however, you should check out the latest sources from
Git. This is done using the following command:
<screen>
$ nixos-checkout <replaceable>/my/sources</replaceable>
</screen>
or
<screen>
$ mkdir -p <replaceable>/my/sources</replaceable>
$ cd <replaceable>/my/sources</replaceable>
$ nix-env -i git
$ git clone git://github.com/NixOS/nixpkgs.git
</screen>
This will check out the latest NixOS sources to
<filename><replaceable>/my/sources</replaceable>/nixpkgs/nixos</filename>
and the Nixpkgs sources to
<filename><replaceable>/my/sources</replaceable>/nixpkgs</filename>.
(The NixOS source tree lives in a subdirectory of the Nixpkgs
repository.) If you want to rebuild your system using your (modified)
sources, you need to tell <command>nixos-rebuild</command> about them
using the <option>-I</option> flag:
<screen>
$ nixos-rebuild switch -I nixpkgs=<replaceable>/my/sources</replaceable>/nixpkgs
</screen>
</para>
<para>If you want <command>nix-env</command> to use the expressions in
<replaceable>/my/sources</replaceable>, use <command>nix-env -f
<replaceable>/my/sources</replaceable>/nixpkgs</command>, or change
the default by adding a symlink in
<filename>~/.nix-defexpr</filename>:
<screen>
$ ln -s <replaceable>/my/sources</replaceable>/nixpkgs ~/.nix-defexpr/nixpkgs
</screen>
You may want to delete the symlink
<filename>~/.nix-defexpr/channels_root</filename> to prevent roots
NixOS channel from clashing with your own tree.</para>
<!-- FIXME: not sure what this means.
<para>You should not pass the base directory
<filename><replaceable>/my/sources</replaceable></filename>
to <command>nix-env</command>, as it will break after interpreting expressions
in <filename>nixos/</filename> as packages.</para>
-->
</section>
<!--===============================================================-->
<section>
<title>Writing NixOS modules</title>
<para>NixOS has a modular system for declarative configuration. This
system combines multiple <emphasis>modules</emphasis> to produce the
full system configuration. One of the modules that constitute the
configuration is <filename>/etc/nixos/configuration.nix</filename>.
Most of the others live in the <link
xlink:href="https://github.com/NixOS/nixpkgs/tree/master/nixos/modules"><filename>nixos/modules</filename></link>
subdirectory of the Nixpkgs tree.</para>
<para>Each NixOS module is a file that handles one logical aspect of
the configuration, such as a specific kind of hardware, a service, or
network settings. A module configuration does not have to handle
everything from scratch; it can use the functionality provided by
other modules for its implementation. Thus a module can
<emphasis>declare</emphasis> options that can be used by other
modules, and conversely can <emphasis>define</emphasis> options
provided by other modules in its own implementation. For example, the
module <link
xlink:href="https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/security/pam.nix"><filename>pam.nix</filename></link>
declares the option <option>security.pam.services</option> that allows
other modules (e.g. <link
xlink:href="https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/networking/ssh/sshd.nix"><filename>sshd.nix</filename></link>)
to define PAM services; and it defines the option
<option>environment.etc</option> (declared by <link
xlink:href="https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/system/etc/etc.nix"><filename>etc.nix</filename></link>)
to cause files to be created in
<filename>/etc/pam.d</filename>.</para>
<para xml:id="para-module-syn">In <xref
linkend="sec-configuration-syntax"/>, we saw the following structure
of NixOS modules:
<programlisting>
{ config, pkgs, ... }:
{ <replaceable>option definitions</replaceable>
}
</programlisting>
This is actually an <emphasis>abbreviated</emphasis> form of module
that only defines options, but does not declare any. The structure of
full NixOS modules is shown in <xref linkend='ex-module-syntax' />.</para>
<example xml:id='ex-module-syntax'><title>Structure of NixOS modules</title>
<programlisting>
{ config, pkgs, ... }: <co xml:id='module-syntax-1' />
{
imports =
[ <replaceable>paths of other modules</replaceable> <co xml:id='module-syntax-2' />
];
options = {
<replaceable>option declarations</replaceable> <co xml:id='module-syntax-3' />
};
config = {
<replaceable>option definitions</replaceable> <co xml:id='module-syntax-4' />
};
}</programlisting>
</example>
<para>The meaning of each part is as follows.
<calloutlist>
<callout arearefs='module-syntax-1'>
<para>This line makes the current Nix expression a function. The
variable <varname>pkgs</varname> contains Nixpkgs, while
<varname>config</varname> contains the full system configuration.
This line can be omitted if there is no reference to
<varname>pkgs</varname> and <varname>config</varname> inside the
module.</para>
</callout>
<callout arearefs='module-syntax-2'>
<para>This list enumerates the paths to other NixOS modules that
should be included in the evaluation of the system configuration.
A default set of modules is defined in the file
<filename>modules/module-list.nix</filename>. These don't need to
be added in the import list.</para>
</callout>
<callout arearefs='module-syntax-3'>
<para>The attribute <varname>options</varname> is a nested set of
<emphasis>option declarations</emphasis> (described below).</para>
</callout>
<callout arearefs='module-syntax-4'>
<para>The attribute <varname>config</varname> is a nested set of
<emphasis>option definitions</emphasis> (also described
below).</para>
</callout>
</calloutlist>
</para>
<para><xref linkend='locate-example' /> shows a module that handles
the regular update of the “locate” database, an index of all files in
the file system. This module declares two options that can be defined
by other modules (typically the users
<filename>configuration.nix</filename>):
<option>services.locate.enable</option> (whether the database should
be updated) and <option>services.locate.period</option> (when the
update should be done). It implements its functionality by defining
two options declared by other modules:
<option>systemd.services</option> (the set of all systemd services)
and <option>services.cron.systemCronJobs</option> (the list of
commands to be executed periodically by <command>cron</command>).</para>
<example xml:id='locate-example'><title>NixOS module for the “locate” service</title>
<programlisting>
{ config, pkgs, ... }:
with pkgs.lib;
let locatedb = "/var/cache/locatedb"; in
{
options = {
services.locate = {
enable = mkOption {
type = types.bool;
default = false;
description = ''
If enabled, NixOS will periodically update the database of
files used by the <command>locate</command> command.
'';
};
period = mkOption {
type = types.str;
default = "15 02 * * *";
description = ''
This option defines (in the format used by cron) when the
locate database is updated. The default is to update at
02:15 at night every day.
'';
};
};
};
config = {
systemd.services.update-locatedb =
{ description = "Update Locate Database";
path = [ pkgs.su ];
script =
''
mkdir -m 0755 -p $(dirname ${locatedb})
exec updatedb --localuser=nobody --output=${locatedb} --prunepaths='/tmp /var/tmp /media /run'
'';
};
services.cron.systemCronJobs = optional config.services.locate.enable
"${config.services.locate.period} root ${config.systemd.package}/bin/systemctl start update-locatedb.service";
};
}</programlisting>
</example>
<section><title>Option declarations</title>
<para>An option declaration specifies the name, type and description
of a NixOS configuration option. It is illegal to define an option
that hasnt been declared in any module. A option declaration
generally looks like this:
<programlisting>
options = {
<replaceable>name</replaceable> = mkOption {
type = <replaceable>type specification</replaceable>;
default = <replaceable>default value</replaceable>;
example = <replaceable>example value</replaceable>;
description = "<replaceable>Description for use in the NixOS manual.</replaceable>";
};
};
</programlisting>
</para>
<para>The function <varname>mkOption</varname> accepts the following arguments.
<variablelist>
<varlistentry>
<term><varname>type</varname></term>
<listitem>
<para>The type of the option (see below). It may be omitted,
but thats not advisable since it may lead to errors that are
hard to diagnose.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>default</varname></term>
<listitem>
<para>The default value used if no value is defined by any
module. A default is not required; in that case, if the option
value is ever used, an error will be thrown.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>example</varname></term>
<listitem>
<para>An example value that will be shown in the NixOS manual.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>description</varname></term>
<listitem>
<para>A textual description of the option, in DocBook format,
that will be included in the NixOS manual.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
<para>Here is a non-exhaustive list of option types:
<variablelist>
<varlistentry>
<term><varname>types.bool</varname></term>
<listitem>
<para>A Boolean.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.int</varname></term>
<listitem>
<para>An integer.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.str</varname></term>
<listitem>
<para>A string.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.lines</varname></term>
<listitem>
<para>A string. If there are multiple definitions, they are
concatenated, with newline characters in between.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.path</varname></term>
<listitem>
<para>A path, defined as anything that, when coerced to a
string, starts with a slash. This includes derivations.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.listOf</varname> <replaceable>t</replaceable></term>
<listitem>
<para>A list of elements of type <replaceable>t</replaceable>
(e.g., <literal>types.listOf types.str</literal> is a list of
strings). Multiple definitions are concatenated together.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.attrsOf</varname> <replaceable>t</replaceable></term>
<listitem>
<para>A set of elements of type <replaceable>t</replaceable>
(e.g., <literal>types.attrsOf types.int</literal> is a set of
name/value pairs, the values being integers).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>types.nullOr</varname> <replaceable>t</replaceable></term>
<listitem>
<para>Either the value <literal>null</literal> or something of
type <replaceable>t</replaceable>.</para>
</listitem>
</varlistentry>
</variablelist>
You can also create new types using the function
<varname>mkOptionType</varname>. See
<filename>lib/types.nix</filename> in Nixpkgs for details.</para>
</section>
<section><title>Option definitions</title>
<para>Option definitions are generally straight-forward bindings of values to option names, like
<programlisting>
config = {
services.httpd.enable = true;
};
</programlisting>
However, sometimes you need to wrap an option definition or set of
option definitions in a <emphasis>property</emphasis> to achieve
certain effects:</para>
<simplesect><title>Delaying conditionals</title>
<para>If a set of option definitions is conditional on the value of
another option, you may need to use <varname>mkIf</varname>.
Consider, for instance:
<programlisting>
config = if config.services.httpd.enable then {
environment.systemPackages = [ <replaceable>...</replaceable> ];
<replaceable>...</replaceable>
} else {};
</programlisting>
This definition will cause Nix to fail with an “infinite recursion”
error. Why? Because the value of
<option>config.services.httpd.enable</option> depends on the value
being constructed here. After all, you could also write the clearly
circular and contradictory:
<programlisting>
config = if config.services.httpd.enable then {
services.httpd.enable = false;
} else {
services.httpd.enable = true;
};
</programlisting>
The solution is to write:
<programlisting>
config = mkIf config.services.httpd.enable {
environment.systemPackages = [ <replaceable>...</replaceable> ];
<replaceable>...</replaceable>
};
</programlisting>
The special function <varname>mkIf</varname> causes the evaluation of
the conditional to be “pushed down” into the individual definitions,
as if you had written:
<programlisting>
config = {
environment.systemPackages = if config.services.httpd.enable then [ <replaceable>...</replaceable> ] else [];
<replaceable>...</replaceable>
};
</programlisting>
</para>
</simplesect>
<simplesect><title>Setting priorities</title>
<para>A module can override the definitions of an option in other
modules by setting a <emphasis>priority</emphasis>. All option
definitions that do not have the lowest priority value are discarded.
By default, option definitions have priority 1000. You can specify an
explicit priority by using <varname>mkOverride</varname>, e.g.
<programlisting>
services.openssh.enable = mkOverride 10 false;
</programlisting>
This definition causes all other definitions with priorities above 10
to be discarded. The function <varname>mkForce</varname> is
equal to <varname>mkOverride 50</varname>.</para>
</simplesect>
<simplesect><title>Merging configurations</title>
<para>In conjunction with <literal>mkIf</literal>, it is sometimes
useful for a module to return multiple sets of option definitions, to
be merged together as if they were declared in separate modules. This
can be done using <varname>mkMerge</varname>:
<programlisting>
config = mkMerge
[ # Unconditional stuff.
{ environment.systemPackages = [ <replaceable>...</replaceable> ];
}
# Conditional stuff.
(mkIf config.services.bla.enable {
environment.systemPackages = [ <replaceable>...</replaceable> ];
})
];
</programlisting>
</para>
</simplesect>
</section>
<section><title>Important options</title>
<para>NixOS has many options, but some are of particular importance to
module writers.</para>
<variablelist>
<varlistentry>
<term><option>environment.etc</option></term>
<listitem>
<para>This set defines files in <filename>/etc</filename>. A
typical use is:
<programlisting>
environment.etc."os-release".text =
''
NAME=NixOS
<replaceable>...</replaceable>
'';
</programlisting>
which causes a file named <filename>/etc/os-release</filename>
to be created with the given contents.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>system.activationScripts</option></term>
<listitem>
<para>A set of shell script fragments that must be executed
whenever the configuration is activated (i.e., at boot time, or
after running <command>nixos-rebuild switch</command>). For instance,
<programlisting>
system.activationScripts.media =
''
mkdir -m 0755 -p /media
'';
</programlisting>
causes the directory <filename>/media</filename> to be created.
Activation scripts must be idempotent. They should not start
background processes such as daemons; use
<option>systemd.services</option> for that.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>systemd.services</option></term>
<listitem>
<para>This is the set of systemd services. Example:
<programlisting>
systemd.services.dhcpcd =
{ description = "DHCP Client";
wantedBy = [ "multi-user.target" ];
after = [ "systemd-udev-settle.service" ];
path = [ dhcpcd pkgs.nettools pkgs.openresolv ];
serviceConfig =
{ Type = "forking";
PIDFile = "/run/dhcpcd.pid";
ExecStart = "${dhcpcd}/sbin/dhcpcd --config ${dhcpcdConf}";
Restart = "always";
};
};
</programlisting>
which creates the systemd unit
<literal>dhcpcd.service</literal>. The option
<option>wantedBy</option> determined which other units pull this
one in; <literal>multi-user.target</literal> is the default
target of the system, so <literal>dhcpcd.service</literal> will
always be started. The option
<option>serviceConfig.ExecStart</option> provides the main
command for the service; its also possible to provide pre-start
actions, stop scripts, and so on.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>users.extraUsers</option></term>
<term><option>users.extraGroups</option></term>
<listitem>
<para>If your service requires special UIDs or GIDs, you can
define them with these options. See <xref
linkend="sec-user-management"/> for details.</para>
</listitem>
</varlistentry>
</variablelist>
</section>
</section>
<!--===============================================================-->
<section>
<title>Building specific parts of NixOS</title>
<para>With the command <command>nix-build</command>, you can build
specific parts of your NixOS configuration. This is done as follows:
<screen>
$ cd <replaceable>/path/to/nixpkgs/nixos</replaceable>
$ nix-build -A config.<replaceable>option</replaceable></screen>
where <replaceable>option</replaceable> is a NixOS option with type
“derivation” (i.e. something that can be built). Attributes of
interest include:
<variablelist>
<varlistentry>
<term><varname>system.build.toplevel</varname></term>
<listitem>
<para>The top-level option that builds the entire NixOS system.
Everything else in your configuration is indirectly pulled in by
this option. This is what <command>nixos-rebuild</command>
builds and what <filename>/run/current-system</filename> points
to afterwards.</para>
<para>A shortcut to build this is:
<screen>
$ nix-build -A system</screen>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>system.build.manual.manual</varname></term>
<listitem><para>The NixOS manual.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>system.build.etc</varname></term>
<listitem><para>A tree of symlinks that form the static parts of
<filename>/etc</filename>.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>system.build.initialRamdisk</varname></term>
<term><varname>system.build.kernel</varname></term>
<listitem>
<para>The initial ramdisk and kernel of the system. This allows
a quick way to test whether the kernel and the initial ramdisk
boot correctly, by using QEMUs <option>-kernel</option> and
<option>-initrd</option> options:
<screen>
$ nix-build -A config.system.build.initialRamdisk -o initrd
$ nix-build -A config.system.build.kernel -o kernel
$ qemu-system-x86_64 -kernel ./kernel/bzImage -initrd ./initrd/initrd -hda /dev/null
</screen>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>system.build.nixos-rebuild</varname></term>
<term><varname>system.build.nixos-install</varname></term>
<term><varname>system.build.nixos-generate-config</varname></term>
<listitem>
<para>These build the corresponding NixOS commands.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>systemd.units.<replaceable>unit-name</replaceable>.unit</varname></term>
<listitem>
<para>This builds the unit with the specified name. Note that
since unit names contain dots
(e.g. <literal>httpd.service</literal>), you need to put them
between quotes, like this:
<screen>
$ nix-build -A 'config.systemd.units."httpd.service".unit'
</screen>
You can also test individual units, without rebuilding the whole
system, by putting them in
<filename>/run/systemd/system</filename>:
<screen>
$ cp $(nix-build -A 'config.systemd.units."httpd.service".unit')/httpd.service \
/run/systemd/system/tmp-httpd.service
$ systemctl daemon-reload
$ systemctl start tmp-httpd.service
</screen>
Note that the unit must not have the same name as any unit in
<filename>/etc/systemd/system</filename> since those take
precedence over <filename>/run/systemd/system</filename>.
Thats why the unit is installed as
<filename>tmp-httpd.service</filename> here.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</section>
<!--===============================================================-->
<section>
<title>Building your own NixOS CD</title>
<para>Building a NixOS CD is as easy as configuring your own computer. The
idea is to use another module which will replace
your <filename>configuration.nix</filename> to configure the system that
would be installed on the CD.</para>
<para>Default CD/DVD configurations are available
inside <filename>nixos/modules/installer/cd-dvd</filename>. To build them
you have to set <envar>NIXOS_CONFIG</envar> before
running <command>nix-build</command> to build the ISO.
<screen>
$ nix-build -A config.system.build.isoImage -I nixos-config=modules/installer/cd-dvd/installation-cd-minimal.nix</screen>
</para>
<para>Before burning your CD/DVD, you can check the content of the image by mounting anywhere like
suggested by the following command:
<screen>
$ mount -o loop -t iso9660 ./result/iso/cd.iso /mnt/iso</screen>
</para>
</section>
<!--===============================================================-->
<section>
<title>Testing the installer</title>
<para>Building, burning, and
booting from an installation CD is rather
tedious, so here is a quick way to see if the installer works
properly:
<screen>
$ nix-build -A config.system.build.nixos-install
$ dd if=/dev/zero of=diskimage seek=2G count=0 bs=1
$ yes | mke2fs -j diskimage
$ mount -o loop diskimage /mnt
$ ./result/bin/nixos-install</screen>
</para>
</section>
<!--===============================================================-->
<section><title>Whole-system testing using virtual machines</title>
<para>Complete NixOS GNU/Linux systems can be tested in virtual
machines (VMs). This makes it possible to test a system upgrade or
configuration change before rebooting into it, using the
<command>nixos-rebuild build-vm</command> or <command>nixos-rebuild
build-vm-with-bootloader</command> command.</para>
<!-- The following is adapted from
http://wiki.nixos.org/wiki/NixOS_VM_tests, by Eelco Dolstra. -->
<para>The <filename>tests/</filename> directory in the NixOS source
tree contains several <emphasis>whole-system unit tests</emphasis>.
These tests can be run<footnote><para>NixOS tests can be run both from
NixOS and from a non-NixOS GNU/Linux distribution, provided the Nix
package manager is installed.</para></footnote> from the NixOS source
tree as follows:
<screen>
$ nix-build tests/ -A nfs.test
</screen>
This performs an automated test of the NFS client and server
functionality in the Linux kernel, including file locking semantics
(e.g., whether locks are maintained across server crashes). It will
first build or download all the dependencies of the test (e.g., all
packages needed to run a NixOS VM). The test is defined in <link
xlink:href="https://nixos.org/repos/nix/nixos/trunk/tests/nfs.nix">
<filename>tests/nfs.nix</filename></link>. If the test succeeds,
<command>nix-build</command> will place a symlink
<filename>./result</filename> in the current directory pointing at the
location in the Nix store of the test results (e.g., screenshots, test
reports, and so on). In particular, a pretty-printed log of the test
is written to <filename>log.html</filename>, which can be viewed using
a web browser like this:
<screen>
$ firefox result/log.html
</screen>
</para>
<para>It is also possible to run the test environment interactively,
allowing you to experiment with the VMs. For example:
<screen>
$ nix-build tests/ -A nfs.driver
$ ./result/bin/nixos-run-vms
</screen>
The script <command>nixos-run-vms</command> starts the three virtual
machines defined in the NFS test using QEMU/KVM. The root file system
of the VMs is created on the fly and kept across VM restarts in
<filename>./</filename><varname>hostname</varname><filename>.qcow2</filename>.</para>
<para>Finally, the test itself can be run interactively. This is
particularly useful when developing or debugging a test:
<screen>
$ nix-build tests/ -A nfs.driver
$ ./result/bin/nixos-test-driver
starting VDE switch for network 1
&gt;
</screen>
Perl statements can now be typed in to start or manipulate the VMs:
<screen>
&gt; startAll;
(the VMs start booting)
&gt; $server-&gt;waitForJob("nfs-kernel-nfsd");
&gt; $client1-&gt;succeed("flock -x /data/lock -c 'sleep 100000' &amp;");
&gt; $client2-&gt;fail("flock -n -s /data/lock true");
&gt; $client1-&gt;shutdown;
(this releases client1's lock)
&gt; $client2-&gt;succeed("flock -n -s /data/lock true");
</screen>
The function <command>testScript</command> executes the entire test
script and drops you back into the test driver command line upon its
completion. This allows you to inspect the state of the VMs after the
test (e.g. to debug the test script).</para>
<para>This and other tests are continuously run on <link
xlink:href="http://hydra.nixos.org/jobset/nixos/trunk">the Hydra
instance at <literal>nixos.org</literal></link>, which allows
developers to be notified of any regressions introduced by a NixOS or
Nixpkgs change.</para>
<para>The actual Nix programming interface to VM testing is in NixOS,
under <link
xlink:href="https://nixos.org/repos/nix/nixos/trunk/lib/testing.nix">
<filename>lib/testing.nix</filename></link>. This file defines a
function which takes an attribute set containing a
<literal>nixpkgs</literal> attribute (the path to a Nixpkgs checkout),
and a <literal>system</literal> attribute (the system type). It
returns an attribute set containing several utility functions, among
which the main entry point is <literal>makeTest</literal>.
</para>
<para>The <literal>makeTest</literal> function takes a function
similar to that found in <link
xlink:href="https://nixos.org/repos/nix/nixos/trunk/tests/nfs.nix">
<filename>tests/nfs.nix</filename></link> (discussed above). It
returns an attribute set containing (among others):
<variablelist>
<varlistentry>
<term><varname>test</varname></term>
<listitem><para>A derivation containing the test log as an HTML
file, as seen above, suitable for presentation in the Hydra
continuous build system.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>report</varname></term>
<listitem><para>A derivation containing a code coverage report, with
meta-data suitable for Hydra.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>driver</varname></term>
<listitem><para>A derivation containing scripts to run the VM test or
interact with the VM network interactively, as seen above.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</section>
</chapter>