nixpkgs/nixos/modules/tasks/network-interfaces.nix
aszlig 141cb70d5c
nixos/networking: Fix typo in ipv6prefixLength.
Within the module it's referenced with an uppercase "P" and ipv6Address
also begins with an uppercase "A" after the "6", so let's make it
consistent.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2014-09-05 02:54:39 +02:00

864 lines
27 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{ config, lib, pkgs, utils, ... }:
with lib;
with utils;
let
cfg = config.networking;
interfaces = attrValues cfg.interfaces;
hasVirtuals = any (i: i.virtual) interfaces;
hasSits = cfg.sits != { };
hasBonds = cfg.bonds != { };
# We must escape interfaces due to the systemd interpretation
subsystemDevice = interface:
"sys-subsystem-net-devices-${escapeSystemdPath interface}.device";
addrOpts = v:
assert v == 4 || v == 6;
{
address = mkOption {
type = types.str;
description = ''
IPv${toString v} address of the interface. Leave empty to configure the
interface using DHCP.
'';
};
prefixLength = mkOption {
type = types.addCheck types.int (n: n >= 0 && n <= (if v == 4 then 32 else 128));
description = ''
Subnet mask of the interface, specified as the number of
bits in the prefix (<literal>${if v == 4 then "24" else "64"}</literal>).
'';
};
};
interfaceOpts = { name, ... }: {
options = {
name = mkOption {
example = "eth0";
type = types.str;
description = "Name of the interface.";
};
ip4 = mkOption {
default = [ ];
example = [
{ address = "10.0.0.1"; prefixLength = 16; }
{ address = "192.168.1.1"; prefixLength = 24; }
];
type = types.listOf types.optionSet;
options = addrOpts 4;
description = ''
List of IPv4 addresses that will be statically assigned to the interface.
'';
};
ip6 = mkOption {
default = [ ];
example = [
{ address = "fdfd:b3f0:482::1"; prefixLength = 48; }
{ address = "2001:1470:fffd:2098::e006"; prefixLength = 64; }
];
type = types.listOf types.optionSet;
options = addrOpts 6;
description = ''
List of IPv6 addresses that will be statically assigned to the interface.
'';
};
ipAddress = mkOption {
default = null;
example = "10.0.0.1";
type = types.nullOr types.str;
description = ''
IP address of the interface. Leave empty to configure the
interface using DHCP.
'';
};
prefixLength = mkOption {
default = null;
example = 24;
type = types.nullOr types.int;
description = ''
Subnet mask of the interface, specified as the number of
bits in the prefix (<literal>24</literal>).
'';
};
subnetMask = mkOption {
default = null;
description = ''
Defunct, supply the prefix length instead.
'';
};
ipv6Address = mkOption {
default = null;
example = "2001:1470:fffd:2098::e006";
type = types.nullOr types.str;
description = ''
IPv6 address of the interface. Leave empty to configure the
interface using NDP.
'';
};
ipv6PrefixLength = mkOption {
default = 64;
example = 64;
type = types.int;
description = ''
Subnet mask of the interface, specified as the number of
bits in the prefix (<literal>64</literal>).
'';
};
macAddress = mkOption {
default = null;
example = "00:11:22:33:44:55";
type = types.nullOr (types.str);
description = ''
MAC address of the interface. Leave empty to use the default.
'';
};
mtu = mkOption {
default = null;
example = 9000;
type = types.nullOr types.int;
description = ''
MTU size for packets leaving the interface. Leave empty to use the default.
'';
};
virtual = mkOption {
default = false;
type = types.bool;
description = ''
Whether this interface is virtual and should be created by tunctl.
This is mainly useful for creating bridges between a host a virtual
network such as VPN or a virtual machine.
'';
};
virtualOwner = mkOption {
default = "root";
type = types.str;
description = ''
In case of a virtual device, the user who owns it.
'';
};
virtualType = mkOption {
default = null;
type = types.nullOr (types.addCheck types.str (v: v == "tun" || v == "tap"));
description = ''
The explicit type of interface to create. Accepts tun or tap strings.
Also accepts null to implicitly detect the type of device.
'';
};
proxyARP = mkOption {
default = false;
type = types.bool;
description = ''
Turn on proxy_arp for this device (and proxy_ndp for ipv6).
This is mainly useful for creating pseudo-bridges between a real
interface and a virtual network such as VPN or a virtual machine for
interfaces that don't support real bridging (most wlan interfaces).
As ARP proxying acts slightly above the link-layer, below-ip traffic
isn't bridged, so things like DHCP won't work. The advantage above
using NAT lies in the fact that no IP addresses are shared, so all
hosts are reachable/routeable.
WARNING: turns on ip-routing, so if you have multiple interfaces, you
should think of the consequence and setup firewall rules to limit this.
'';
};
};
config = {
name = mkDefault name;
};
};
in
{
###### interface
options = {
networking.hostName = mkOption {
default = "nixos";
description = ''
The name of the machine. Leave it empty if you want to obtain
it from a DHCP server (if using DHCP).
'';
};
networking.enableIPv6 = mkOption {
default = true;
description = ''
Whether to enable support for IPv6.
'';
};
networking.defaultGateway = mkOption {
default = "";
example = "131.211.84.1";
description = ''
The default gateway. It can be left empty if it is auto-detected through DHCP.
'';
};
networking.defaultGatewayWindowSize = mkOption {
default = null;
example = 524288;
type = types.nullOr types.int;
description = ''
The window size of the default gateway. It limits maximal data bursts that TCP peers
are allowed to send to us.
'';
};
networking.nameservers = mkOption {
default = [];
example = ["130.161.158.4" "130.161.33.17"];
description = ''
The list of nameservers. It can be left empty if it is auto-detected through DHCP.
'';
};
networking.search = mkOption {
default = [];
example = [ "example.com" "local.domain" ];
type = types.listOf types.str;
description = ''
The list of search paths used when resolving domain names.
'';
};
networking.domain = mkOption {
default = "";
example = "home";
description = ''
The domain. It can be left empty if it is auto-detected through DHCP.
'';
};
networking.useHostResolvConf = mkOption {
type = types.bool;
default = false;
description = ''
In containers, whether to use the
<filename>resolv.conf</filename> supplied by the host.
'';
};
networking.localCommands = mkOption {
default = "";
example = "text=anything; echo You can put $text here.";
description = ''
Shell commands to be executed at the end of the
<literal>network-setup</literal> systemd service. Note that if
you are using DHCP to obtain the network configuration,
interfaces may not be fully configured yet.
'';
};
networking.interfaces = mkOption {
default = {};
example =
{ eth0.ip4 = [ {
address = "131.211.84.78";
prefixLength = 25;
} ];
};
description = ''
The configuration for each network interface. If
<option>networking.useDHCP</option> is true, then every
interface not listed here will be configured using DHCP.
'';
type = types.loaOf types.optionSet;
options = [ interfaceOpts ];
};
networking.bridges = mkOption {
default = { };
example =
{ br0.interfaces = [ "eth0" "eth1" ];
br1.interfaces = [ "eth2" "wlan0" ];
};
description =
''
This option allows you to define Ethernet bridge devices
that connect physical networks together. The value of this
option is an attribute set. Each attribute specifies a
bridge, with the attribute name specifying the name of the
bridge's network interface.
'';
type = types.attrsOf types.optionSet;
options = {
interfaces = mkOption {
example = [ "eth0" "eth1" ];
type = types.listOf types.string;
description =
"The physical network interfaces connected by the bridge.";
};
};
};
networking.bonds = mkOption {
default = { };
example = {
bond0 = {
interfaces = [ "eth0" "wlan0" ];
miimon = 100;
mode = "active-backup";
};
fatpipe.interfaces = [ "enp4s0f0" "enp4s0f1" "enp5s0f0" "enp5s0f1" ];
};
description = ''
This option allows you to define bond devices that aggregate multiple,
underlying networking interfaces together. The value of this option is
an attribute set. Each attribute specifies a bond, with the attribute
name specifying the name of the bond's network interface
'';
type = types.attrsOf types.optionSet;
options = {
interfaces = mkOption {
example = [ "enp4s0f0" "enp4s0f1" "wlan0" ];
type = types.listOf types.string;
description = "The interfaces to bond together";
};
miimon = mkOption {
default = null;
example = 100;
type = types.nullOr types.int;
description = ''
Miimon is the number of millisecond in between each round of polling
by the device driver for failed links. By default polling is not
enabled and the driver is trusted to properly detect and handle
failure scenarios.
'';
};
mode = mkOption {
default = null;
example = "active-backup";
type = types.nullOr types.string;
description = ''
The mode which the bond will be running. The default mode for
the bonding driver is balance-rr, optimizing for throughput.
More information about valid modes can be found at
https://www.kernel.org/doc/Documentation/networking/bonding.txt
'';
};
};
};
networking.sits = mkOption {
type = types.attrsOf types.optionSet;
default = { };
example = {
hurricane = {
remote = "10.0.0.1";
local = "10.0.0.22";
ttl = 255;
};
msipv6 = {
remote = "192.168.0.1";
dev = "enp3s0";
ttl = 127;
};
};
description = ''
This option allows you to define 6-to-4 interfaces which should be automatically created.
'';
options = {
remote = mkOption {
type = types.nullOr types.str;
default = null;
example = "10.0.0.1";
description = ''
The address of the remote endpoint to forward traffic over.
'';
};
local = mkOption {
type = types.nullOr types.str;
default = null;
example = "10.0.0.22";
description = ''
The address of the local endpoint which the remote
side should send packets to.
'';
};
ttl = mkOption {
type = types.nullOr types.int;
default = null;
example = 255;
description = ''
The time-to-live of the connection to the remote tunnel endpoint.
'';
};
dev = mkOption {
type = types.nullOr types.str;
default = null;
example = "enp4s0f0";
description = ''
The underlying network device on which the tunnel resides.
'';
};
};
};
networking.vlans = mkOption {
default = { };
example = {
vlan0 = {
id = 3;
interface = "enp3s0";
};
vlan1 = {
id = 1;
interface = "wlan0";
};
};
description =
''
This option allows you to define vlan devices that tag packets
on top of a physical interface. The value of this option is an
attribute set. Each attribute specifies a vlan, with the name
specifying the name of the vlan interface.
'';
type = types.attrsOf types.optionSet;
options = {
id = mkOption {
example = 1;
type = types.int;
description = "The vlan identifier";
};
interface = mkOption {
example = "enp4s0";
type = types.string;
description = "The interface the vlan will transmit packets through.";
};
};
};
networking.useDHCP = mkOption {
type = types.bool;
default = true;
description = ''
Whether to use DHCP to obtain an IP address and other
configuration for all network interfaces that are not manually
configured.
'';
};
};
###### implementation
config = {
assertions =
flip map interfaces (i: {
assertion = i.subnetMask == null;
message = "The networking.interfaces.${i.name}.subnetMask option is defunct. Use prefixLength instead.";
});
boot.kernelModules = [ ]
++ optional cfg.enableIPv6 "ipv6"
++ optional hasVirtuals "tun"
++ optional hasSits "sit"
++ optional hasBonds "bonding";
boot.extraModprobeConfig =
# This setting is intentional as it prevents default bond devices
# from being created.
optionalString hasBonds "options bonding max_bonds=0";
environment.systemPackages =
[ pkgs.host
pkgs.iproute
pkgs.iputils
pkgs.nettools
pkgs.wirelesstools
pkgs.iw
pkgs.rfkill
pkgs.openresolv
]
++ optional (cfg.bridges != {}) pkgs.bridge_utils
++ optional hasVirtuals pkgs.tunctl
++ optional cfg.enableIPv6 pkgs.ndisc6;
security.setuidPrograms = [ "ping" "ping6" ];
systemd.targets."network-interfaces" =
{ description = "All Network Interfaces";
wantedBy = [ "network.target" ];
unitConfig.X-StopOnReconfiguration = true;
};
systemd.services =
let
networkSetup =
{ description = "Networking Setup";
after = [ "network-interfaces.target" ];
before = [ "network.target" ];
wantedBy = [ "network.target" ];
unitConfig.ConditionCapability = "CAP_NET_ADMIN";
path = [ pkgs.iproute ];
serviceConfig.Type = "oneshot";
serviceConfig.RemainAfterExit = true;
script =
''
# Set the static DNS configuration, if given.
${pkgs.openresolv}/sbin/resolvconf -m 1 -a static <<EOF
${optionalString (cfg.nameservers != [] && cfg.domain != "") ''
domain ${cfg.domain}
''}
${optionalString (cfg.search != []) ("search " + concatStringsSep " " cfg.search)}
${flip concatMapStrings cfg.nameservers (ns: ''
nameserver ${ns}
'')}
EOF
# Disable or enable IPv6.
${optionalString (!config.boot.isContainer) ''
if [ -e /proc/sys/net/ipv6/conf/all/disable_ipv6 ]; then
echo ${if cfg.enableIPv6 then "0" else "1"} > /proc/sys/net/ipv6/conf/all/disable_ipv6
fi
''}
# Set the default gateway.
${optionalString (cfg.defaultGateway != "") ''
# FIXME: get rid of "|| true" (necessary to make it idempotent).
ip route add default via "${cfg.defaultGateway}" ${
optionalString (cfg.defaultGatewayWindowSize != null)
"window ${cfg.defaultGatewayWindowSize}"} || true
''}
# Turn on forwarding if any interface has enabled proxy_arp.
${optionalString (any (i: i.proxyARP) interfaces) ''
echo 1 > /proc/sys/net/ipv4/ip_forward
''}
# Run any user-specified commands.
${cfg.localCommands}
'';
};
# For each interface <foo>, create a job <foo>-cfg.service"
# that performs static configuration. It has a "wants"
# dependency on <foo>.service, which is supposed to create
# the interface and need not exist (i.e. for hardware
# interfaces). It has a binds-to dependency on the actual
# network device, so it only gets started after the interface
# has appeared, and it's stopped when the interface
# disappears.
configureInterface = i:
let
ips = i.ip4 ++ optionals cfg.enableIPv6 i.ip6
++ optional (i.ipAddress != null) {
address = i.ipAddress;
prefixLength = i.prefixLength;
} ++ optional (cfg.enableIPv6 && i.ipv6Address != null) {
address = i.ipv6Address;
prefixLength = i.ipv6PrefixLength;
};
in
nameValuePair "${i.name}-cfg"
{ description = "Configuration of ${i.name}";
wantedBy = [ "network-interfaces.target" ];
bindsTo = [ (subsystemDevice i.name) ];
after = [ (subsystemDevice i.name) ];
serviceConfig.Type = "oneshot";
serviceConfig.RemainAfterExit = true;
path = [ pkgs.iproute pkgs.gawk ];
script =
''
echo "bringing up interface..."
ip link set "${i.name}" up
''
+ optionalString (i.macAddress != null)
''
echo "setting MAC address to ${i.macAddress}..."
ip link set "${i.name}" address "${i.macAddress}"
''
+ optionalString (i.mtu != null)
''
echo "setting MTU to ${toString i.mtu}..."
ip link set "${i.name}" mtu "${toString i.mtu}"
''
# Ip Setup
+
''
curIps=$(ip -o a show dev "${i.name}" | awk '{print $4}')
# Only do an add if it's necessary. This is
# useful when the Nix store is accessed via this
# interface (e.g. in a QEMU VM test).
''
+ flip concatMapStrings (ips) (ip:
let
address = "${ip.address}/${toString ip.prefixLength}";
in
''
echo "checking ip ${address}..."
if ! echo "$curIps" | grep "${address}" >/dev/null 2>&1; then
if out=$(ip addr add "${address}" dev "${i.name}" 2>&1); then
echo "added ip ${address}..."
restart_network_setup=true
elif ! echo "$out" | grep "File exists" >/dev/null 2>&1; then
echo "failed to add ${address}"
exit 1
fi
fi
'')
+ optionalString (ips != [ ])
''
if [ restart_network_setup = true ]; then
# Ensure that the default gateway remains set.
# (Flushing this interface may have removed it.)
${config.systemd.package}/bin/systemctl try-restart --no-block network-setup.service
fi
${config.systemd.package}/bin/systemctl start ip-up.target
''
+ optionalString i.proxyARP
''
echo 1 > /proc/sys/net/ipv4/conf/${i.name}/proxy_arp
''
+ optionalString (i.proxyARP && cfg.enableIPv6)
''
echo 1 > /proc/sys/net/ipv6/conf/${i.name}/proxy_ndp
'';
preStop =
''
echo "releasing configured ip's..."
''
+ flip concatMapStrings (ips) (ip:
let
address = "${ip.address}/${toString ip.prefixLength}";
in
''
echo -n "Deleting ${address}..."
ip addr del "${address}" dev "${i.name}" >/dev/null 2>&1 || echo -n " Failed"
echo ""
'');
};
createTunDevice = i: nameValuePair "${i.name}-netdev"
{ description = "Virtual Network Interface ${i.name}";
requires = [ "dev-net-tun.device" ];
after = [ "dev-net-tun.device" ];
wantedBy = [ "network.target" (subsystemDevice i.name) ];
path = [ pkgs.iproute ];
serviceConfig = {
Type = "oneshot";
RemainAfterExit = true;
};
script = ''
ip tuntap add dev "${i.name}" \
${optionalString (i.virtualType != null) "mode ${i.virtualType}"} \
user "${i.virtualOwner}"
'';
postStop = ''
ip link del ${i.name}
'';
};
createBridgeDevice = n: v: nameValuePair "${n}-netdev"
(let
deps = map subsystemDevice v.interfaces;
in
{ description = "Bridge Interface ${n}";
wantedBy = [ "network.target" (subsystemDevice n) ];
bindsTo = deps;
after = deps;
serviceConfig.Type = "oneshot";
serviceConfig.RemainAfterExit = true;
path = [ pkgs.bridge_utils pkgs.iproute ];
script =
''
# Remove Dead Interfaces
ip link show "${n}" >/dev/null 2>&1 && ip link delete "${n}"
brctl addbr "${n}"
# Set bridge's hello time to 0 to avoid startup delays.
brctl setfd "${n}" 0
${flip concatMapStrings v.interfaces (i: ''
brctl addif "${n}" "${i}"
ip link set "${i}" up
ip addr flush dev "${i}"
echo "bringing up network device ${n}..."
ip link set "${n}" up
'')}
# !!! Should delete (brctl delif) any interfaces that
# no longer belong to the bridge.
'';
postStop =
''
ip link set "${n}" down
brctl delbr "${n}"
'';
});
createBondDevice = n: v: nameValuePair "${n}-netdev"
(let
deps = map subsystemDevice v.interfaces;
in
{ description = "Bond Interface ${n}";
wantedBy = [ "network.target" (subsystemDevice n) ];
bindsTo = deps;
after = deps;
serviceConfig.Type = "oneshot";
serviceConfig.RemainAfterExit = true;
path = [ pkgs.ifenslave pkgs.iproute ];
script = ''
# Remove Dead Interfaces
ip link show "${n}" >/dev/null 2>&1 && ip link delete "${n}"
ip link add "${n}" type bond
# !!! There must be a better way to wait for the interface
while [ ! -d /sys/class/net/${n} ]; do sleep 0.1; done;
# Set the miimon and mode options
${optionalString (v.miimon != null)
"echo ${toString v.miimon} > /sys/class/net/${n}/bonding/miimon"}
${optionalString (v.mode != null)
"echo \"${v.mode}\" > /sys/class/net/${n}/bonding/mode"}
# Bring up the bridge and enslave the specified interfaces
ip link set "${n}" up
${flip concatMapStrings v.interfaces (i: ''
ifenslave "${n}" "${i}"
'')}
'';
postStop = ''
ip link set "${n}" down
ifenslave -d "${n}"
ip link delete "${n}"
'';
});
createSitDevice = n: v: nameValuePair "${n}-netdev"
(let
deps = optional (v.dev != null) (subsystemDevice v.dev);
in
{ description = "6-to-4 Tunnel Interface ${n}";
wantedBy = [ "network.target" (subsystemDevice n) ];
bindsTo = deps;
after = deps;
serviceConfig.Type = "oneshot";
serviceConfig.RemainAfterExit = true;
path = [ pkgs.iproute ];
script = ''
# Remove Dead Interfaces
ip link show "${n}" >/dev/null 2>&1 && ip link delete "${n}"
ip link add "${n}" type sit \
${optionalString (v.remote != null) "remote \"${v.remote}\""} \
${optionalString (v.local != null) "local \"${v.local}\""} \
${optionalString (v.ttl != null) "ttl ${toString v.ttl}"} \
${optionalString (v.dev != null) "dev \"${v.dev}\""}
ip link set "${n}" up
'';
postStop = ''
ip link delete "${n}"
'';
});
createVlanDevice = n: v: nameValuePair "${n}-netdev"
(let
deps = [ (subsystemDevice v.interface) ];
in
{ description = "Vlan Interface ${n}";
wantedBy = [ "network.target" (subsystemDevice n) ];
bindsTo = deps;
after = deps;
serviceConfig.Type = "oneshot";
serviceConfig.RemainAfterExit = true;
path = [ pkgs.iproute ];
script = ''
# Remove Dead Interfaces
ip link show "${n}" >/dev/null 2>&1 && ip link delete "${n}"
ip link add link "${v.interface}" "${n}" type vlan id "${toString v.id}"
ip link set "${n}" up
'';
postStop = ''
ip link delete "${n}"
'';
});
in listToAttrs (
map configureInterface interfaces ++
map createTunDevice (filter (i: i.virtual) interfaces))
// mapAttrs' createBridgeDevice cfg.bridges
// mapAttrs' createBondDevice cfg.bonds
// mapAttrs' createSitDevice cfg.sits
// mapAttrs' createVlanDevice cfg.vlans
// { "network-setup" = networkSetup; };
# Set the host and domain names in the activation script. Don't
# clear it if it's not configured in the NixOS configuration,
# since it may have been set by dhcpcd in the meantime.
system.activationScripts.hostname =
optionalString (config.networking.hostName != "") ''
hostname "${config.networking.hostName}"
'';
system.activationScripts.domain =
optionalString (config.networking.domain != "") ''
domainname "${config.networking.domain}"
'';
services.udev.extraRules =
''
KERNEL=="tun", TAG+="systemd"
'';
};
}