nixpkgs/nixos/doc/manual/release-notes/rl-2009.xml
2020-05-22 09:13:23 +00:00

454 lines
18 KiB
XML

<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09">
<title>Release 20.09 (“Nightingale”, 2020.09/??)</title>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-highlights">
<title>Highlights</title>
<para>
In addition to numerous new and upgraded packages, this release has the
following highlights:
</para>
<itemizedlist>
<listitem>
<para>
Support is planned until the end of April 2021, handing over to 21.03.
</para>
</listitem>
<listitem>
<para>GNOME desktop environment was upgraded to 3.36, see its <link xlink:href="https://help.gnome.org/misc/release-notes/3.36/">release notes</link>.</para>
</listitem>
<listitem>
<para>
<package>maxx</package> package removed along with <varname>services.xserver.desktopManager.maxx</varname> module.
Please migrate to <package>cdesktopenv</package> and <varname>services.xserver.desktopManager.cde</varname> module.
</para>
</listitem>
<listitem>
<para>
We now distribute a GNOME ISO.
</para>
</listitem>
<listitem>
<para>
PHP now defaults to PHP 7.4, updated from 7.3.
</para>
</listitem>
<listitem>
<para>
Two new options, <link linkend="opt-services.openssh.authorizedKeysCommand">authorizedKeysCommand</link>
and <link linkend="opt-services.openssh.authorizedKeysCommandUser">authorizedKeysCommandUser</link>, have
been added to the <literal>openssh</literal> module. If you have <literal>AuthorizedKeysCommand</literal>
in your <link linkend="opt-services.openssh.extraConfig">services.openssh.extraConfig</link> you should
make use of these new options instead.
</para>
</listitem>
<listitem>
<para>
There is a new module for Podman(<varname>virtualisation.podman</varname>), a drop-in replacement for the Docker command line.
</para>
</listitem>
<listitem>
<para>
The new <varname>virtualisation.containers</varname> module manages configuration shared by the CRI-O and Podman modules.
</para>
</listitem>
<listitem>
<para>
Declarative Docker containers are renamed from <varname>docker-containers</varname> to <varname>virtualisation.oci-containers.containers</varname>.
This is to make it possible to use <literal>podman</literal> instead of <literal>docker</literal>.
</para>
</listitem>
<listitem>
<para>
MariaDB has been updated to 10.4, MariaDB Galera to 26.4.
Before you upgrade, it would be best to take a backup of your database.
For MariaDB Galera Cluster, see <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104-with-galera-cluster/">Upgrading
from MariaDB 10.3 to MariaDB 10.4 with Galera Cluster</link> instead.
Before doing the upgrade read <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104/#incompatible-changes-between-103-and-104">Incompatible
Changes Between 10.3 and 10.4</link>.
After the upgrade you will need to run <literal>mysql_upgrade</literal>.
MariaDB 10.4 introduces a number of changes to the authentication process, intended to make things easier and more
intuitive. See <link xlink:href="https://mariadb.com/kb/en/authentication-from-mariadb-104/">Authentication from MariaDB 10.4</link>.
unix_socket auth plugin does not use a password, and uses the connecting user's UID instead. When a new MariaDB data directory is initialized, two MariaDB users are
created and can be used with new unix_socket auth plugin, as well as traditional mysql_native_password plugin: root@localhost and mysql@localhost. To actually use
the traditional mysql_native_password plugin method, one must run the following:
<programlisting>
services.mysql.initialScript = pkgs.writeText "mariadb-init.sql" ''
ALTER USER root@localhost IDENTIFIED VIA mysql_native_password USING PASSWORD("verysecret");
'';
</programlisting>
When MariaDB data directory is just upgraded (not initialized), the users are not created or modified.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-new-services">
<title>New Services</title>
<para>
The following new services were added since the last release:
</para>
<itemizedlist>
<listitem>
<para>
There is a new <xref linkend="opt-security.doas.enable"/> module that provides <command>doas</command>, a lighter alternative to <command>sudo</command> with many of the same features.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-incompatibilities">
<title>Backward Incompatibilities</title>
<para>
When upgrading from a previous release, please be aware of the following
incompatible changes:
</para>
<itemizedlist>
<listitem>
<para>
<literal>buildGoModule</literal> now internally creates a vendor directory
in the source tree for downloaded modules instead of using go's <link
xlink:href="https://golang.org/cmd/go/#hdr-Module_proxy_protocol">module
proxy protocol</link>. This storage format is simpler and therefore less
likekly to break with future versions of go. As a result
<literal>buildGoModule</literal> switched from
<literal>modSha256</literal> to the <literal>vendorSha256</literal>
attribute to pin fetched version data. <literal>buildGoModule</literal>
still accepts <literal>modSha256</literal> with a warning, but support will
be removed in the next release.
</para>
</listitem>
<listitem>
<para>
Grafana is now built without support for phantomjs by default. Phantomjs support has been
<link xlink:href="https://grafana.com/docs/grafana/latest/guides/whats-new-in-v6-4/">deprecated in Grafana</link>
and the <package>phantomjs</package> project is
<link xlink:href="https://github.com/ariya/phantomjs/issues/15344#issue-302015362">currently unmaintained</link>.
It can still be enabled by providing <literal>phantomJsSupport = true</literal> to the package instanciation:
<programlisting>{
services.grafana.package = pkgs.grafana.overrideAttrs (oldAttrs: rec {
phantomJsSupport = false;
});
}</programlisting>
</para>
</listitem>
<listitem>
<para>
The <link linkend="opt-services.supybot.enable">supybot</link> module now uses <literal>/var/lib/supybot</literal>
as its default <link linkend="opt-services.supybot.stateDir">stateDir</link> path if <literal>stateVersion</literal>
is 20.09 or higher. It also enables number of
<link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Sandboxing">systemd sandboxing options</link>
which may possibly interfere with some plugins. If this is the case you can disable the options through attributes in
<option>systemd.services.supybot.serviceConfig</option>.
</para>
</listitem>
<listitem>
<para>
The <literal>security.duosec.skey</literal> option, which stored a secret in the
nix store, has been replaced by a new
<link linkend="opt-security.duosec.secretKeyFile">security.duosec.secretKeyFile</link>
option for better security.
</para>
<para>
<literal>security.duosec.ikey</literal> has been renamed to
<link linkend="opt-security.duosec.integrationKey">security.duosec.integrationKey</link>.
</para>
</listitem>
<listitem>
<para>
The initrd SSH support now uses OpenSSH rather than Dropbear to
allow the use of Ed25519 keys and other OpenSSH-specific
functionality. Host keys must now be in the OpenSSH format, and at
least one pre-generated key must be specified.
</para>
<para>
If you used the <option>boot.initrd.network.ssh.host*Key</option>
options, you'll get an error explaining how to convert your host
keys and migrate to the new
<option>boot.initrd.network.ssh.hostKeys</option> option.
Otherwise, if you don't have any host keys set, you'll need to
generate some; see the <option>hostKeys</option> option
documentation for instructions.
</para>
</listitem>
<listitem>
<para>
Since this release there's an easy way to customize your PHP
install to get a much smaller base PHP with only wanted
extensions enabled. See the following snippet installing a
smaller PHP with the extensions <literal>imagick</literal>,
<literal>opcache</literal>, <literal>pdo</literal> and
<literal>pdo_mysql</literal> loaded:
<programlisting>
environment.systemPackages = [
(pkgs.php.withExtensions
({ all, ... }: with all; [
imagick
opcache
pdo
pdo_mysql
])
)
];</programlisting>
The default <literal>php</literal> attribute hasn't lost any
extensions. The <literal>opcache</literal> extension has been
added.
All upstream PHP extensions are available under <package><![CDATA[php.extensions.<name?>]]></package>.
</para>
<para>
All PHP <literal>config</literal> flags have been removed for
the following reasons:
<itemizedlist>
<listitem>
<para>
The updated <literal>php</literal> attribute is now easily
customizable to your liking by using
<literal>php.withExtensions</literal> or
<literal>php.buildEnv</literal> instead of writing config files
or changing configure flags.
</para>
</listitem>
<listitem>
<para>
The remaining configuration flags can now be set directly on
the <literal>php</literal> attribute. For example, instead of
<programlisting>
php.override {
config.php.embed = true;
config.php.apxs2 = false;
}
</programlisting>
you should now write
<programlisting>
php.override {
embedSupport = true;
apxs2Support = false;
}
</programlisting>
</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>
Gollum received a major update to version 5.x and you may have to change
some links in your wiki when migrating from gollum 4.x. More information
can be found
<link xlink:href="https://github.com/gollum/gollum/wiki/5.0-release-notes#migrating-your-wiki">here</link>.
</para>
</listitem>
<listitem>
<para>
Deluge 2.x was added and is used as default for new NixOS
installations where stateVersion is >= 20.09. If you are upgrading from a previous
NixOS version, you can set <literal>service.deluge.package = pkgs.deluge-2_x</literal>
to upgrade to Deluge 2.x and migrate the state to the new format.
Be aware that backwards state migrations are not supported by Deluge.
</para>
</listitem>
<listitem>
<para>
Add option <literal>services.nginx.enableSandbox</literal> to starting Nginx web server with additional sandbox/hardening options.
By default, write access to <literal>services.nginx.stateDir</literal> is allowed. To allow writing to other folders,
use <literal>systemd.services.nginx.serviceConfig.ReadWritePaths</literal>
<programlisting>
systemd.services.nginx.serviceConfig.ReadWritePaths = [ "/var/www" ];
</programlisting>
</para>
</listitem>
<listitem>
<para>
The NixOS options <literal>nesting.clone</literal> and
<literal>nesting.children</literal> have been deleted, and
replaced with named <xref linkend="opt-specialisation"/>
configurations.
</para>
<para>
Replace a <literal>nesting.clone</literal> entry with:
<programlisting>{
<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = {
<link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = {
...
};
};</programlisting>
</para>
<para>
Replace a <literal>nesting.children</literal> entry with:
<programlisting>{
<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = {
<link xlink:href="#opt-specialisation._name_.inheritParentConfig">inheritParentConfig</link> = false;
<link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = {
...
};
};</programlisting>
</para>
<para>
To switch to a specialised configuration at runtime you need to
run:
<programlisting>
# sudo /run/current-system/specialisation/example-sub-configuration/bin/switch-to-configuration test
</programlisting>
Before you would have used:
<programlisting>
# sudo /run/current-system/fine-tune/child-1/bin/switch-to-configuration test
</programlisting>
</para>
</listitem>
<listitem>
<para>
The Nginx log directory has been moved to <literal>/var/log/nginx</literal>, the cache directory
to <literal>/var/cache/nginx</literal>. The option <literal>services.nginx.stateDir</literal> has
been removed.
</para>
</listitem>
<listitem>
<para>
The httpd web server previously started its main process as root
privileged, then ran worker processes as a less privileged identity user.
This was changed to start all of httpd as a less privileged user (defined by
<xref linkend="opt-services.httpd.user"/> and
<xref linkend="opt-services.httpd.group"/>). As a consequence, all files that
are needed for httpd to run (included configuration fragments, SSL
certificates and keys, etc.) must now be readable by this less privileged
user/group.
</para>
<para>
The default value for <xref linkend="opt-services.httpd.mpm"/>
has been changed from <literal>prefork</literal> to <literal>event</literal>. Along with
this change the default value for
<link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.&lt;name&gt;.http2</link>
has been set to <literal>true</literal>.
</para>
</listitem>
<listitem>
<para>
The <literal>systemd-networkd</literal> option
<literal>systemd.network.networks.&lt;name&gt;.dhcp.CriticalConnection</literal>
has been removed following upstream systemd's deprecation of the same. It is recommended to use
<literal>systemd.network.networks.&lt;name&gt;.networkConfig.KeepConfiguration</literal> instead.
See <citerefentry><refentrytitle>systemd.network</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> for details.
</para>
</listitem>
<listitem>
<para>
The <literal>systemd-networkd</literal> option
<literal>systemd.network.networks._name_.dhcpConfig</literal>
has been renamed to
<xref linkend="opt-systemd.network.networks._name_.dhcpV4Config"/>
following upstream systemd's documentation change.
See <citerefentry><refentrytitle>systemd.network</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> for details.
</para>
</listitem>
<listitem>
<para>
In the <literal>picom</literal> module, several options that accepted
floating point numbers encoded as strings (for example
<xref linkend="opt-services.picom.activeOpacity"/>) have been changed
to the (relatively) new native <literal>float</literal> type. To migrate
your configuration simply remove the quotes around the numbers.
</para>
</listitem>
<listitem>
<para>
When using <literal>buildBazelPackage</literal> from Nixpkgs,
<literal>flat</literal> hash mode is now used for dependencies
instead of <literal>recursive</literal>. This is to better allow
using hashed mirrors where needed. As a result, these hashes
will have changed.
</para>
</listitem>
<listitem>
<para>
The rkt module has been removed, it was archived by upstream.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-notable-changes">
<title>Other Notable Changes</title>
<itemizedlist>
<listitem>
<para>
<option>services.journald.rateLimitBurst</option> was updated from
<literal>1000</literal> to <literal>10000</literal> to follow the new
upstream systemd default.
</para>
</listitem>
<listitem>
<para>
The <package>notmuch</package> package move its emacs-related binaries and
emacs lisp files to a separate output. They're not part
of the default <literal>out</literal> output anymore - if you relied on the
<literal>notmuch-emacs-mua</literal> binary or the emacs lisp files, access them via
the <literal>notmuch.emacs</literal> output.
</para>
</listitem>
<listitem>
<para>
The default output of <literal>buildGoPackage</literal> is now <literal>$out</literal> instead of <literal>$bin</literal>.
</para>
</listitem>
<listitem>
<para>
The cc- and binutils-wrapper's "infix salt" and <literal>_BUILD_</literal> and <literal>_TARGET_</literal> user infixes have been replaced with with a "suffix salt" and suffixes and <literal>_FOR_BUILD</literal> and <literal>_FOR_TARGET</literal>.
This matches the autotools convention for env vars which standard for these things, making interfacing with other tools easier.
</para>
</listitem>
<listitem>
<para>
Additional Git documentation (HTML and text files) is now available via the <literal>git-doc</literal> package.
</para>
</listitem>
<listitem>
<para>
Default algorithm for ZRAM swap was changed to <literal>zstd</literal>.
</para>
</listitem>
</itemizedlist>
</section>
</section>