nixpkgs/doc/languages-frameworks/perl.xml
2019-09-18 22:12:54 +02:00

162 lines
8.1 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="sec-language-perl">
<title>Perl</title>
<para>
Nixpkgs provides a function <varname>buildPerlPackage</varname>, a generic package builder function for any Perl package that has a standard <varname>Makefile.PL</varname>. Its implemented in <link
xlink:href="https://github.com/NixOS/nixpkgs/blob/master/pkgs/development/perl-modules/generic"><filename>pkgs/development/perl-modules/generic</filename></link>.
</para>
<para>
Perl packages from CPAN are defined in <link
xlink:href="https://github.com/NixOS/nixpkgs/blob/master/pkgs/top-level/perl-packages.nix"><filename>pkgs/top-level/perl-packages.nix</filename></link>, rather than <filename>pkgs/all-packages.nix</filename>. Most Perl packages are so straight-forward to build that they are defined here directly, rather than having a separate function for each package called from <filename>perl-packages.nix</filename>. However, more complicated packages should be put in a separate file, typically in <filename>pkgs/development/perl-modules</filename>. Here is an example of the former:
<programlisting>
ClassC3 = buildPerlPackage rec {
name = "Class-C3-0.21";
src = fetchurl {
url = "mirror://cpan/authors/id/F/FL/FLORA/${name}.tar.gz";
sha256 = "1bl8z095y4js66pwxnm7s853pi9czala4sqc743fdlnk27kq94gz";
};
};
</programlisting>
Note the use of <literal>mirror://cpan/</literal>, and the <literal>${name}</literal> in the URL definition to ensure that the name attribute is consistent with the source that were actually downloading. Perl packages are made available in <filename>all-packages.nix</filename> through the variable <varname>perlPackages</varname>. For instance, if you have a package that needs <varname>ClassC3</varname>, you would typically write
<programlisting>
foo = import ../path/to/foo.nix {
inherit stdenv fetchurl ...;
inherit (perlPackages) ClassC3;
};
</programlisting>
in <filename>all-packages.nix</filename>. You can test building a Perl package as follows:
<screen>
<prompt>$ </prompt>nix-build -A perlPackages.ClassC3
</screen>
<varname>buildPerlPackage</varname> adds <literal>perl-</literal> to the start of the name attribute, so the package above is actually called <literal>perl-Class-C3-0.21</literal>. So to install it, you can say:
<screen>
<prompt>$ </prompt>nix-env -i perl-Class-C3
</screen>
(Of course you can also install using the attribute name: <literal>nix-env -i -A perlPackages.ClassC3</literal>.)
</para>
<para>
So what does <varname>buildPerlPackage</varname> do? It does the following:
<orderedlist>
<listitem>
<para>
In the configure phase, it calls <literal>perl Makefile.PL</literal> to generate a Makefile. You can set the variable <varname>makeMakerFlags</varname> to pass flags to <filename>Makefile.PL</filename>
</para>
</listitem>
<listitem>
<para>
It adds the contents of the <envar>PERL5LIB</envar> environment variable to <literal>#! .../bin/perl</literal> line of Perl scripts as <literal>-I<replaceable>dir</replaceable></literal> flags. This ensures that a script can find its dependencies. (This can cause this shebang line to become too long for Darwin to handle; see the note below.)
</para>
</listitem>
<listitem>
<para>
In the fixup phase, it writes the propagated build inputs (<varname>propagatedBuildInputs</varname>) to the file <filename>$out/nix-support/propagated-user-env-packages</filename>. <command>nix-env</command> recursively installs all packages listed in this file when you install a package that has it. This ensures that a Perl package can find its dependencies.
</para>
</listitem>
</orderedlist>
</para>
<para>
<varname>buildPerlPackage</varname> is built on top of <varname>stdenv</varname>, so everything can be customised in the usual way. For instance, the <literal>BerkeleyDB</literal> module has a <varname>preConfigure</varname> hook to generate a configuration file used by <filename>Makefile.PL</filename>:
<programlisting>
{ buildPerlPackage, fetchurl, db }:
buildPerlPackage rec {
name = "BerkeleyDB-0.36";
src = fetchurl {
url = "mirror://cpan/authors/id/P/PM/PMQS/${name}.tar.gz";
sha256 = "07xf50riarb60l1h6m2dqmql8q5dij619712fsgw7ach04d8g3z1";
};
preConfigure = ''
echo "LIB = ${db.out}/lib" > config.in
echo "INCLUDE = ${db.dev}/include" >> config.in
'';
}
</programlisting>
</para>
<para>
Dependencies on other Perl packages can be specified in the <varname>buildInputs</varname> and <varname>propagatedBuildInputs</varname> attributes. If something is exclusively a build-time dependency, use <varname>buildInputs</varname>; if its (also) a runtime dependency, use <varname>propagatedBuildInputs</varname>. For instance, this builds a Perl module that has runtime dependencies on a bunch of other modules:
<programlisting>
ClassC3Componentised = buildPerlPackage rec {
name = "Class-C3-Componentised-1.0004";
src = fetchurl {
url = "mirror://cpan/authors/id/A/AS/ASH/${name}.tar.gz";
sha256 = "0xql73jkcdbq4q9m0b0rnca6nrlvf5hyzy8is0crdk65bynvs8q1";
};
propagatedBuildInputs = [
ClassC3 ClassInspector TestException MROCompat
];
};
</programlisting>
</para>
<para>
On Darwin, if a script has too many <literal>-I<replaceable>dir</replaceable></literal> flags in its first line (its “shebang line”), it will not run. This can be worked around by calling the <literal>shortenPerlShebang</literal> function from the <literal>postInstall</literal> phase:
<programlisting>
{ stdenv, buildPerlPackage, fetchurl, shortenPerlShebang }:
ImageExifTool = buildPerlPackage {
pname = "Image-ExifTool";
version = "11.50";
src = fetchurl {
url = "https://www.sno.phy.queensu.ca/~phil/exiftool/Image-ExifTool-11.50.tar.gz";
sha256 = "0d8v48y94z8maxkmw1rv7v9m0jg2dc8xbp581njb6yhr7abwqdv3";
};
buildInputs = stdenv.lib.optional stdenv.isDarwin shortenPerlShebang;
postInstall = stdenv.lib.optional stdenv.isDarwin ''
shortenPerlShebang $out/bin/exiftool
'';
};
</programlisting>
This will remove the <literal>-I</literal> flags from the shebang line, rewrite them in the <literal>use lib</literal> form, and put them on the next line instead. This function can be given any number of Perl scripts as arguments; it will modify them in-place.
</para>
<section xml:id="ssec-generation-from-CPAN">
<title>Generation from CPAN</title>
<para>
Nix expressions for Perl packages can be generated (almost) automatically from CPAN. This is done by the program <command>nix-generate-from-cpan</command>, which can be installed as follows:
</para>
<screen>
<prompt>$ </prompt>nix-env -i nix-generate-from-cpan
</screen>
<para>
This program takes a Perl module name, looks it up on CPAN, fetches and unpacks the corresponding package, and prints a Nix expression on standard output. For example:
<screen>
<prompt>$ </prompt>nix-generate-from-cpan XML::Simple
XMLSimple = buildPerlPackage rec {
name = "XML-Simple-2.22";
src = fetchurl {
url = "mirror://cpan/authors/id/G/GR/GRANTM/${name}.tar.gz";
sha256 = "b9450ef22ea9644ae5d6ada086dc4300fa105be050a2030ebd4efd28c198eb49";
};
propagatedBuildInputs = [ XMLNamespaceSupport XMLSAX XMLSAXExpat ];
meta = {
description = "An API for simple XML files";
license = with stdenv.lib.licenses; [ artistic1 gpl1Plus ];
};
};
</screen>
The output can be pasted into <filename>pkgs/top-level/perl-packages.nix</filename> or wherever else you need it.
</para>
</section>
<section xml:id="ssec-perl-cross-compilation">
<title>Cross-compiling modules</title>
<para>
Nixpkgs has experimental support for cross-compiling Perl modules. In many cases, it will just work out of the box, even for modules with native extensions. Sometimes, however, the Makefile.PL for a module may (indirectly) import a native module. In that case, you will need to make a stub for that module that will satisfy the Makefile.PL and install it into <filename>lib/perl5/site_perl/cross_perl/${perl.version}</filename>. See the <varname>postInstall</varname> for <varname>DBI</varname> for an example.
</para>
</section>
</section>