nixpkgs/doc/package-specific-user-notes.xml
adisbladis 41d1b8fa88
emacsPackages: Drop old emacsPackages (non-NG) sets
These have been deprecated for a long time now and has not seen much maintenance.
2019-08-30 16:43:16 +01:00

483 lines
17 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<chapter xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" xml:id="package-specific-user-notes">
<title>Package-specific usage notes</title>
<para>
These chapters includes some notes
that apply to specific packages and should
answer some of the frequently asked questions
related to Nixpkgs use.
Some useful information related to package use
can be found in <link linkend="chap-package-notes">package-specific development notes</link>.
</para>
<section xml:id="opengl">
<title>OpenGL</title>
<para>
Packages that use OpenGL have NixOS desktop as their primary target. The
current solution for loading the GPU-specific drivers is based on
<literal>libglvnd</literal> and looks for the driver implementation in
<literal>LD_LIBRARY_PATH</literal>. If you are using a non-NixOS
GNU/Linux/X11 desktop with free software video drivers, consider launching
OpenGL-dependent programs from Nixpkgs with Nixpkgs versions of
<literal>libglvnd</literal> and <literal>mesa_drivers</literal> in
<literal>LD_LIBRARY_PATH</literal>. For proprietary video drivers you might
have luck with also adding the corresponding video driver package.
</para>
</section>
<section xml:id="locales">
<title>Locales</title>
<para>
To allow simultaneous use of packages linked against different versions of
<literal>glibc</literal> with different locale archive formats Nixpkgs
patches <literal>glibc</literal> to rely on
<literal>LOCALE_ARCHIVE</literal> environment variable.
</para>
<para>
On non-NixOS distributions this variable is obviously not set. This can
cause regressions in language support or even crashes in some
Nixpkgs-provided programs. The simplest way to mitigate this problem is
exporting the <literal>LOCALE_ARCHIVE</literal> variable pointing to
<literal>${glibcLocales}/lib/locale/locale-archive</literal>. The drawback
(and the reason this is not the default) is the relatively large (a hundred
MiB) size of the full set of locales. It is possible to build a custom set
of locales by overriding parameters <literal>allLocales</literal> and
<literal>locales</literal> of the package.
</para>
</section>
<section xml:id="sec-emacs">
<title>Emacs</title>
<section xml:id="sec-emacs-config">
<title>Configuring Emacs</title>
<para>
The Emacs package comes with some extra helpers to make it easier to
configure. <varname>emacsWithPackages</varname> allows you to manage
packages from ELPA. This means that you will not have to install that
packages from within Emacs. For instance, if you wanted to use
<literal>company</literal>, <literal>counsel</literal>,
<literal>flycheck</literal>, <literal>ivy</literal>,
<literal>magit</literal>, <literal>projectile</literal>, and
<literal>use-package</literal> you could use this as a
<filename>~/.config/nixpkgs/config.nix</filename> override:
</para>
<screen>
{
packageOverrides = pkgs: with pkgs; {
myEmacs = emacsWithPackages (epkgs: (with epkgs.melpaStablePackages; [
company
counsel
flycheck
ivy
magit
projectile
use-package
]));
}
}
</screen>
<para>
You can install it like any other packages via <command>nix-env -iA
myEmacs</command>. However, this will only install those packages. It will
not <literal>configure</literal> them for us. To do this, we need to
provide a configuration file. Luckily, it is possible to do this from
within Nix! By modifying the above example, we can make Emacs load a custom
config file. The key is to create a package that provide a
<filename>default.el</filename> file in
<filename>/share/emacs/site-start/</filename>. Emacs knows to load this
file automatically when it starts.
</para>
<screen>
{
packageOverrides = pkgs: with pkgs; rec {
myEmacsConfig = writeText "default.el" ''
;; initialize package
(require 'package)
(package-initialize 'noactivate)
(eval-when-compile
(require 'use-package))
;; load some packages
(use-package company
:bind ("&lt;C-tab&gt;" . company-complete)
:diminish company-mode
:commands (company-mode global-company-mode)
:defer 1
:config
(global-company-mode))
(use-package counsel
:commands (counsel-descbinds)
:bind (([remap execute-extended-command] . counsel-M-x)
("C-x C-f" . counsel-find-file)
("C-c g" . counsel-git)
("C-c j" . counsel-git-grep)
("C-c k" . counsel-ag)
("C-x l" . counsel-locate)
("M-y" . counsel-yank-pop)))
(use-package flycheck
:defer 2
:config (global-flycheck-mode))
(use-package ivy
:defer 1
:bind (("C-c C-r" . ivy-resume)
("C-x C-b" . ivy-switch-buffer)
:map ivy-minibuffer-map
("C-j" . ivy-call))
:diminish ivy-mode
:commands ivy-mode
:config
(ivy-mode 1))
(use-package magit
:defer
:if (executable-find "git")
:bind (("C-x g" . magit-status)
("C-x G" . magit-dispatch-popup))
:init
(setq magit-completing-read-function 'ivy-completing-read))
(use-package projectile
:commands projectile-mode
:bind-keymap ("C-c p" . projectile-command-map)
:defer 5
:config
(projectile-global-mode))
'';
myEmacs = emacsWithPackages (epkgs: (with epkgs.melpaStablePackages; [
(runCommand "default.el" {} ''
mkdir -p $out/share/emacs/site-lisp
cp ${myEmacsConfig} $out/share/emacs/site-lisp/default.el
'')
company
counsel
flycheck
ivy
magit
projectile
use-package
]));
};
}
</screen>
<para>
This provides a fairly full Emacs start file. It will load in addition to
the user's presonal config. You can always disable it by passing
<command>-q</command> to the Emacs command.
</para>
<para>
Sometimes <varname>emacsWithPackages</varname> is not enough, as this
package set has some priorities imposed on packages (with the lowest
priority assigned to Melpa Unstable, and the highest for packages manually
defined in <filename>pkgs/top-level/emacs-packages.nix</filename>). But you
can't control this priorities when some package is installed as a
dependency. You can override it on per-package-basis, providing all the
required dependencies manually - but it's tedious and there is always a
possibility that an unwanted dependency will sneak in through some other
package. To completely override such a package you can use
<varname>overrideScope'</varname>.
</para>
<screen>
overrides = self: super: rec {
haskell-mode = self.melpaPackages.haskell-mode;
...
};
((emacsPackagesGen emacs).overrideScope' overrides).emacsWithPackages (p: with p; [
# here both these package will use haskell-mode of our own choice
ghc-mod
dante
])
</screen>
</section>
</section>
<section xml:id="dlib">
<title>DLib</title>
<para>
<link xlink:href="http://dlib.net/">DLib</link> is a modern, C++-based toolkit which
provides several machine learning algorithms.
</para>
<section xml:id="compiling-without-avx-support">
<title>Compiling without AVX support</title>
<para>
Especially older CPUs don't support
<link xlink:href="https://en.wikipedia.org/wiki/Advanced_Vector_Extensions">AVX</link>
(<abbrev>Advanced Vector Extensions</abbrev>) instructions that are used by DLib to
optimize their algorithms.
</para>
<para>
On the affected hardware errors like <literal>Illegal instruction</literal> will occur.
In those cases AVX support needs to be disabled:
<programlisting>self: super: {
dlib = super.dlib.override { avxSupport = false; };
}</programlisting>
</para>
</section>
</section>
<section xml:id="unfree-software">
<title>Unfree software</title>
<para>
All users of Nixpkgs are free software users, and many users (and
developers) of Nixpkgs want to limit and tightly control their exposure to
unfree software. At the same time, many users need (or want)
to run some specific
pieces of proprietary software. Nixpkgs includes some expressions for unfree
software packages. By default unfree software cannot be installed and
doesnt show up in searches. To allow installing unfree software in a
single Nix invocation one can export
<literal>NIXPKGS_ALLOW_UNFREE=1</literal>. For a persistent solution, users
can set <literal>allowUnfree</literal> in the Nixpkgs configuration.
</para>
<para>
Fine-grained control is possible by defining
<literal>allowUnfreePredicate</literal> function in config; it takes the
<literal>mkDerivation</literal> parameter attrset and returns
<literal>true</literal> for unfree packages that should be allowed.
</para>
</section>
<section xml:id="sec-steam">
<title>Steam</title>
<section xml:id="sec-steam-nix">
<title>Steam in Nix</title>
<para>
Steam is distributed as a <filename>.deb</filename> file, for now only as
an i686 package (the amd64 package only has documentation). When unpacked,
it has a script called <filename>steam</filename> that in Ubuntu (their
target distro) would go to <filename>/usr/bin </filename>. When run for the
first time, this script copies some files to the user's home, which include
another script that is the ultimate responsible for launching the steam
binary, which is also in $HOME.
</para>
<para>
Nix problems and constraints:
<itemizedlist>
<listitem>
<para>
We don't have <filename>/bin/bash</filename> and many scripts point
there. Similarly for <filename>/usr/bin/python</filename> .
</para>
</listitem>
<listitem>
<para>
We don't have the dynamic loader in <filename>/lib </filename>.
</para>
</listitem>
<listitem>
<para>
The <filename>steam.sh</filename> script in $HOME can not be patched, as
it is checked and rewritten by steam.
</para>
</listitem>
<listitem>
<para>
The steam binary cannot be patched, it's also checked.
</para>
</listitem>
</itemizedlist>
</para>
<para>
The current approach to deploy Steam in NixOS is composing a FHS-compatible
chroot environment, as documented
<link xlink:href="http://sandervanderburg.blogspot.nl/2013/09/composing-fhs-compatible-chroot.html">here</link>.
This allows us to have binaries in the expected paths without disrupting
the system, and to avoid patching them to work in a non FHS environment.
</para>
</section>
<section xml:id="sec-steam-play">
<title>How to play</title>
<para>
For 64-bit systems it's important to have
<programlisting>hardware.opengl.driSupport32Bit = true;</programlisting>
in your <filename>/etc/nixos/configuration.nix</filename>. You'll also need
<programlisting>hardware.pulseaudio.support32Bit = true;</programlisting>
if you are using PulseAudio - this will enable 32bit ALSA apps integration.
To use the Steam controller or other Steam supported controllers such as
the DualShock 4 or Nintendo Switch Pro, you need to add
<programlisting>hardware.steam-hardware.enable = true;</programlisting>
to your configuration.
</para>
</section>
<section xml:id="sec-steam-troub">
<title>Troubleshooting</title>
<para>
<variablelist>
<varlistentry>
<term>
Steam fails to start. What do I do?
</term>
<listitem>
<para>
Try to run
<programlisting>strace steam</programlisting>
to see what is causing steam to fail.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
Using the FOSS Radeon or nouveau (nvidia) drivers
</term>
<listitem>
<itemizedlist>
<listitem>
<para>
The <literal>newStdcpp</literal> parameter was removed since NixOS
17.09 and should not be needed anymore.
</para>
</listitem>
<listitem>
<para>
Steam ships statically linked with a version of libcrypto that
conflics with the one dynamically loaded by radeonsi_dri.so. If you
get the error
<programlisting>steam.sh: line 713: 7842 Segmentation fault (core dumped)</programlisting>
have a look at
<link xlink:href="https://github.com/NixOS/nixpkgs/pull/20269">this
pull request</link>.
</para>
</listitem>
</itemizedlist>
</listitem>
</varlistentry>
<varlistentry>
<term>
Java
</term>
<listitem>
<orderedlist>
<listitem>
<para>
There is no java in steam chrootenv by default. If you get a message
like
<programlisting>/home/foo/.local/share/Steam/SteamApps/common/towns/towns.sh: line 1: java: command not found</programlisting>
You need to add
<programlisting> steam.override { withJava = true; };</programlisting>
to your configuration.
</para>
</listitem>
</orderedlist>
</listitem>
</varlistentry>
</variablelist>
</para>
</section>
<section xml:id="sec-steam-run">
<title>steam-run</title>
<para>
The FHS-compatible chroot used for steam can also be used to run other
linux games that expect a FHS environment. To do it, add
<programlisting>pkgs.(steam.override {
nativeOnly = true;
newStdcpp = true;
}).run</programlisting>
to your configuration, rebuild, and run the game with
<programlisting>steam-run ./foo</programlisting>
</para>
</section>
</section>
<section xml:id="sec-citrix">
<title>Citrix Receiver &amp; Citrix Workspace App</title>
<para>
<note>
<para>
Please note that the <literal>citrix_receiver</literal> package has been deprecated since its
development was <link xlink:href="https://docs.citrix.com/en-us/citrix-workspace-app.html">discontinued by upstream</link>
and will be replaced by <link xlink:href="https://www.citrix.com/products/workspace-app/">the citrix workspace app</link>.
</para>
</note>
<link xlink:href="https://www.citrix.com/products/receiver/">Citrix Receiver</link> and
<link xlink:href="https://www.citrix.com/products/workspace-app/">Citrix Workspace App</link>
are a remote desktop viewers which provide access to
<link xlink:href="https://www.citrix.com/products/xenapp-xendesktop/">XenDesktop</link>
installations.
</para>
<section xml:id="sec-citrix-base">
<title>Basic usage</title>
<para>
The tarball archive needs to be downloaded manually as the license
agreements of the vendor for
<link xlink:href="https://www.citrix.com/downloads/citrix-receiver/">Citrix Receiver</link>
or <link xlink:href="https://www.citrix.de/downloads/workspace-app/linux/workspace-app-for-linux-latest.html">Citrix Workspace</link>
need to be accepted first.
Then run <command>nix-prefetch-url file://$PWD/linuxx64-$version.tar.gz</command>.
With the archive available
in the store the package can be built and installed with Nix.
</para>
<warning>
<title>Caution with <command>nix-shell</command> installs</title>
<para>
It's recommended to install <literal>Citrix Receiver</literal>
and/or <literal>Citrix Workspace</literal> using
<literal>nix-env -i</literal> or globally to
ensure that the <literal>.desktop</literal> files are installed properly
into <literal>$XDG_CONFIG_DIRS</literal>. Otherwise it won't be possible to
open <literal>.ica</literal> files automatically from the browser to start
a Citrix connection.
</para>
</warning>
</section>
<section xml:id="sec-citrix-custom-certs">
<title>Custom certificates</title>
<para>
The <literal>Citrix Receiver</literal> and <literal>Citrix Workspace App</literal>
in <literal>nixpkgs</literal> trust several certificates
<link xlink:href="https://curl.haxx.se/docs/caextract.html">from the
Mozilla database</link> by default. However several companies using Citrix
might require their own corporate certificate. On distros with imperative
packaging these certs can be stored easily in
<link xlink:href="https://developer-docs.citrix.com/projects/receiver-for-linux-command-reference/en/13.7/"><literal>$ICAROOT</literal></link>,
however this directory is a store path in <literal>nixpkgs</literal>. In
order to work around this issue the package provides a simple mechanism to
add custom certificates without rebuilding the entire package using
<literal>symlinkJoin</literal>:
<programlisting>
<![CDATA[with import <nixpkgs> { config.allowUnfree = true; };
let extraCerts = [ ./custom-cert-1.pem ./custom-cert-2.pem /* ... */ ]; in
citrix_workspace.override { # the same applies for `citrix_receiver` if used.
inherit extraCerts;
}]]>
</programlisting>
</para>
</section>
</section>
</chapter>