nixpkgs/pkgs/stdenv/generic/setup.sh
John Ericson 6a5cda5131 stdenv setup: Run setup hooks and other processing after accumulating deps
I find the separation of concerns, accumulating, then processing, easier
to follow. Also, with my yet-to-be-merged cross work, the accumulation
part will become more complex.
2017-11-15 18:51:06 -05:00

1070 lines
28 KiB
Bash
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

set -eu
set -o pipefail
if (( "${NIX_DEBUG:-0}" >= 6 )); then
set -x
fi
: ${outputs:=out}
######################################################################
# Hook handling.
# Run all hooks with the specified name in the order in which they
# were added, stopping if any fails (returns a non-zero exit
# code). The hooks for <hookName> are the shell function or variable
# <hookName>, and the values of the shell array <hookName>Hooks.
runHook() {
local oldOpts="$(shopt -po nounset)"
set -u # May be called from elsewhere, so do `set -u`.
local hookName="$1"
shift
local hooksSlice="${hookName%Hook}Hooks[@]"
local hook
# Hack around old bash being bad and thinking empty arrays are
# undefined.
for hook in "_callImplicitHook 0 $hookName" ${!hooksSlice+"${!hooksSlice}"}; do
_eval "$hook" "$@"
set -u # To balance `_eval`
done
eval "${oldOpts}"
return 0
}
# Run all hooks with the specified name, until one succeeds (returns a
# zero exit code). If none succeed, return a non-zero exit code.
runOneHook() {
local oldOpts="$(shopt -po nounset)"
set -u # May be called from elsewhere, so do `set -u`.
local hookName="$1"
shift
local hooksSlice="${hookName%Hook}Hooks[@]"
local hook ret=1
# Hack around old bash like above
for hook in "_callImplicitHook 1 $hookName" ${!hooksSlice+"${!hooksSlice}"}; do
if _eval "$hook" "$@"; then
ret=0
break
fi
set -u # To balance `_eval`
done
eval "${oldOpts}"
return "$ret"
}
# Run the named hook, either by calling the function with that name or
# by evaluating the variable with that name. This allows convenient
# setting of hooks both from Nix expressions (as attributes /
# environment variables) and from shell scripts (as functions). If you
# want to allow multiple hooks, use runHook instead.
_callImplicitHook() {
set -u
local def="$1"
local hookName="$2"
case "$(type -t "$hookName")" in
(function|alias|builtin)
set +u
"$hookName";;
(file)
set +u
source "$hookName";;
(keyword) :;;
(*) if [ -z "${!hookName:-}" ]; then
return "$def";
else
set +u
eval "${!hookName}"
fi;;
esac
# `_eval` expects hook to need nounset disable and leave it
# disabled anyways, so Ok to to delegate. The alternative of a
# return trap is no good because it would affect nested returns.
}
# A function wrapper around eval that ensures that return inside
# hooks exits the hook, not the caller. Also will only pass args if
# command can take them
_eval() {
if [ "$(type -t "$1")" = function ]; then
set +u
"$@" # including args
else
set +u
eval "$1"
fi
# `run*Hook` reenables `set -u`
}
######################################################################
# Logging.
# Obsolete.
stopNest() { true; }
header() { echo "$1"; }
closeNest() { true; }
# Prints a command such that all word splits are unambiguous. We need
# to split the command in three parts because the middle format string
# will be, and must be, repeated for each argument. The first argument
# goes before the ':' and is just for convenience.
echoCmd() {
printf "%s:" "$1"
shift
printf ' %q' "$@"
echo
}
######################################################################
# Error handling.
exitHandler() {
exitCode="$?"
set +e
if [ -n "${showBuildStats:-}" ]; then
times > "$NIX_BUILD_TOP/.times"
local -a times=($(cat "$NIX_BUILD_TOP/.times"))
# Print the following statistics:
# - user time for the shell
# - system time for the shell
# - user time for all child processes
# - system time for all child processes
echo "build time elapsed: " "${times[@]}"
fi
if (( "$exitCode" != 0 )); then
runHook failureHook
# If the builder had a non-zero exit code and
# $succeedOnFailure is set, create the file
# $out/nix-support/failed to signal failure, and exit
# normally. Otherwise, return the original exit code.
if [ -n "${succeedOnFailure:-}" ]; then
echo "build failed with exit code $exitCode (ignored)"
mkdir -p "$out/nix-support"
printf "%s" "$exitCode" > "$out/nix-support/failed"
exit 0
fi
else
runHook exitHook
fi
exit "$exitCode"
}
trap "exitHandler" EXIT
######################################################################
# Helper functions.
addToSearchPathWithCustomDelimiter() {
local delimiter="$1"
local varName="$2"
local dir="$3"
if [ -d "$dir" ]; then
export "${varName}=${!varName:+${!varName}${delimiter}}${dir}"
fi
}
PATH_DELIMITER=':'
addToSearchPath() {
addToSearchPathWithCustomDelimiter "${PATH_DELIMITER}" "$@"
}
ensureDir() {
echo "warning: ensureDir is deprecated; use mkdir instead" >&2
local dir
for dir in "$@"; do
if ! [ -x "$dir" ]; then mkdir -p "$dir"; fi
done
}
# Add $1/lib* into rpaths.
# The function is used in multiple-outputs.sh hook,
# so it is defined here but tried after the hook.
_addRpathPrefix() {
if [ "${NIX_NO_SELF_RPATH:-0}" != 1 ]; then
export NIX_LDFLAGS="-rpath $1/lib $NIX_LDFLAGS"
if [ -n "${NIX_LIB64_IN_SELF_RPATH:-}" ]; then
export NIX_LDFLAGS="-rpath $1/lib64 $NIX_LDFLAGS"
fi
if [ -n "${NIX_LIB32_IN_SELF_RPATH:-}" ]; then
export NIX_LDFLAGS="-rpath $1/lib32 $NIX_LDFLAGS"
fi
fi
}
# Return success if the specified file is an ELF object.
isELF() {
local fn="$1"
local fd
local magic
exec {fd}< "$fn"
read -r -n 4 -u "$fd" magic
exec {fd}<&-
if [[ "$magic" =~ ELF ]]; then return 0; else return 1; fi
}
# Return success if the specified file is a script (i.e. starts with
# "#!").
isScript() {
local fn="$1"
local fd
local magic
if ! [ -x /bin/sh ]; then return 0; fi
exec {fd}< "$fn"
read -r -n 2 -u "$fd" magic
exec {fd}<&-
if [[ "$magic" =~ \#! ]]; then return 0; else return 1; fi
}
# printf unfortunately will print a trailing newline regardless
printLines() {
[[ "$#" -gt 0 ]] || return 0
printf '%s\n' "$@"
}
printWords() {
[[ "$#" -gt 0 ]] || return 0
printf '%s ' "$@"
}
######################################################################
# Initialisation.
# Set a fallback default value for SOURCE_DATE_EPOCH, used by some
# build tools to provide a deterministic substitute for the "current"
# time. Note that 1 = 1970-01-01 00:00:01. We don't use 0 because it
# confuses some applications.
export SOURCE_DATE_EPOCH
: ${SOURCE_DATE_EPOCH:=1}
# Wildcard expansions that don't match should expand to an empty list.
# This ensures that, for instance, "for i in *; do ...; done" does the
# right thing.
shopt -s nullglob
# Set up the initial path.
PATH=
for i in $initialPath; do
if [ "$i" = / ]; then i=; fi
addToSearchPath PATH "$i/bin"
done
if (( "${NIX_DEBUG:-0}" >= 1 )); then
echo "initial path: $PATH"
fi
# Check that the pre-hook initialised SHELL.
if [ -z "${SHELL:-}" ]; then echo "SHELL not set"; exit 1; fi
BASH="$SHELL"
export CONFIG_SHELL="$SHELL"
# Dummy implementation of the paxmark function. On Linux, this is
# overwritten by paxctl's setup hook.
paxmark() { true; }
# Execute the pre-hook.
if [ -z "${shell:-}" ]; then export shell="$SHELL"; fi
runHook preHook
# Allow the caller to augment buildInputs (it's not always possible to
# do this before the call to setup.sh, since the PATH is empty at that
# point; here we have a basic Unix environment).
runHook addInputsHook
# Recursively find all build inputs.
findInputs() {
local pkg="$1"
local var="$2"
local propagatedBuildInputsFile="$3"
# TODO(@Ericson2314): Restore using associative array once Darwin
# nix-shell doesn't use impure bash. This should replace the O(n)
# case with an O(1) hash map lookup, assuming bash is implemented
# well :D.
local varSlice="$var[*]"
# ${..-} to hack around old bash empty array problem
case "${!varSlice-}" in
*" $pkg "*) return 0 ;;
esac
unset -v varSlice
eval "$var"'+=("$pkg")'
if ! [ -e "$pkg" ]; then
echo "build input $pkg does not exist" >&2
exit 1
fi
if [ -f "$pkg/nix-support/$propagatedBuildInputsFile" ]; then
local pkgNext
for pkgNext in $(< "$pkg/nix-support/$propagatedBuildInputsFile"); do
findInputs "$pkgNext" "$var" "$propagatedBuildInputsFile"
done
fi
}
# Add package to the future PATH and run setup hooks
activatePackage() {
local pkg="$1"
if [ -f "$pkg" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
source "$pkg"
eval "$oldOpts"
fi
if [ -d "$pkg/bin" ]; then
addToSearchPath _PATH "$pkg/bin"
fi
if [ -f "$pkg/nix-support/setup-hook" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
source "$pkg/nix-support/setup-hook"
eval "$oldOpts"
fi
}
declare -a nativePkgs crossPkgs
if [ -z "${crossConfig:-}" ]; then
# Not cross-compiling - both buildInputs (and variants like propagatedBuildInputs)
# are handled identically to nativeBuildInputs
for i in ${nativeBuildInputs:-} ${buildInputs:-} \
${defaultNativeBuildInputs:-} ${defaultBuildInputs:-} \
${propagatedNativeBuildInputs:-} ${propagatedBuildInputs:-}; do
findInputs "$i" nativePkgs propagated-native-build-inputs
done
for i in "${nativePkgs[@]}"; do
activatePackage "$i"
done
else
for i in ${buildInputs:-} ${defaultBuildInputs:-} ${propagatedBuildInputs:-}; do
findInputs "$i" crossPkgs propagated-build-inputs
done
for i in ${nativeBuildInputs:-} ${defaultNativeBuildInputs:-} ${propagatedNativeBuildInputs:-}; do
findInputs "$i" nativePkgs propagated-native-build-inputs
done
for i in "${nativePkgs[@]}" "${crossPkgs[@]}"; do
activatePackage "$i"
done
fi
# Set the relevant environment variables to point to the build inputs
# found above.
#
# These `depOffset`s tell the env hook what sort of dependency
# (ignoring propagatedness) is being passed to the env hook. In a real
# language, we'd append a closure with this information to the
# relevant env hook array, but bash doesn't have closures, so it's
# easier to just pass this in.
_addToNativeEnv() {
local pkg="$1"
if [[ -n "${crossConfig:-}" ]]; then
local -i depOffset=-1
else
local -i depOffset=0
fi
# Run the package-specific hooks set by the setup-hook scripts.
runHook envHook "$pkg"
}
# Old bash empty array hack
for i in ${nativePkgs+"${nativePkgs[@]}"}; do
_addToNativeEnv "$i"
done
_addToCrossEnv() {
local pkg="$1"
local -i depOffset=0
# Run the package-specific hooks set by the setup-hook scripts.
runHook crossEnvHook "$pkg"
}
# Old bash empty array hack
for i in ${crossPkgs+"${crossPkgs[@]}"}; do
_addToCrossEnv "$i"
done
_addRpathPrefix "$out"
# Set the TZ (timezone) environment variable, otherwise commands like
# `date' will complain (e.g., `Tue Mar 9 10:01:47 Local time zone must
# be set--see zic manual page 2004').
export TZ=UTC
# Set the prefix. This is generally $out, but it can be overriden,
# for instance if we just want to perform a test build/install to a
# temporary location and write a build report to $out.
if [ -z "${prefix:-}" ]; then
prefix="$out";
fi
if [ "${useTempPrefix:-}" = 1 ]; then
prefix="$NIX_BUILD_TOP/tmp_prefix";
fi
PATH="${_PATH-}${_PATH:+${PATH:+:}}$PATH"
if (( "${NIX_DEBUG:-0}" >= 1 )); then
echo "final path: $PATH"
fi
# Make GNU Make produce nested output.
export NIX_INDENT_MAKE=1
# Normalize the NIX_BUILD_CORES variable. The value might be 0, which
# means that we're supposed to try and auto-detect the number of
# available CPU cores at run-time.
if [ -z "${NIX_BUILD_CORES:-}" ]; then
NIX_BUILD_CORES="1"
elif [ "$NIX_BUILD_CORES" -le 0 ]; then
NIX_BUILD_CORES=$(nproc 2>/dev/null || true)
if expr >/dev/null 2>&1 "$NIX_BUILD_CORES" : "^[0-9][0-9]*$"; then
:
else
NIX_BUILD_CORES="1"
fi
fi
export NIX_BUILD_CORES
# Prevent OpenSSL-based applications from using certificates in
# /etc/ssl.
# Leave it in shells for convenience.
if [ -z "${SSL_CERT_FILE:-}" ] && [ -z "${IN_NIX_SHELL:-}" ]; then
export SSL_CERT_FILE=/no-cert-file.crt
fi
######################################################################
# Textual substitution functions.
substitute() {
local input="$1"
local output="$2"
shift 2
if [ ! -f "$input" ]; then
echo "substitute(): ERROR: file '$input' does not exist" >&2
return 1
fi
local content
# read returns non-0 on EOF, so we want read to fail
if IFS='' read -r -N 0 content < "$input"; then
echo "substitute(): ERROR: File \"$input\" has null bytes, won't process" >&2
return 1
fi
while (( "$#" )); do
case "$1" in
--replace)
pattern="$2"
replacement="$3"
shift 3
;;
--subst-var)
local varName="$2"
shift 2
# check if the used nix attribute name is a valid bash name
if ! [[ "$varName" =~ ^[a-zA-Z_][a-zA-Z0-9_]*$ ]]; then
echo "substitute(): ERROR: substitution variables must be valid Bash names, \"$varName\" isn't." >&2
return 1
fi
pattern="@$varName@"
replacement="${!varName}"
;;
--subst-var-by)
pattern="@$2@"
replacement="$3"
shift 3
;;
*)
echo "substitute(): ERROR: Invalid command line argument: $1" >&2
return 1
;;
esac
content="${content//"$pattern"/$replacement}"
done
if [ -e "$output" ]; then chmod +w "$output"; fi
printf "%s" "$content" > "$output"
}
substituteInPlace() {
local fileName="$1"
shift
substitute "$fileName" "$fileName" "$@"
}
# Substitute all environment variables that start with a lowercase character and
# are valid Bash names.
substituteAll() {
local input="$1"
local output="$2"
local -a args=()
for varName in $(awk 'BEGIN { for (v in ENVIRON) if (v ~ /^[a-z][a-zA-Z0-9_]*$/) print v }'); do
if (( "${NIX_DEBUG:-0}" >= 1 )); then
printf "@%s@ -> %q\n" "${varName}" "${!varName}"
fi
args+=("--subst-var" "$varName")
done
substitute "$input" "$output" "${args[@]}"
}
substituteAllInPlace() {
local fileName="$1"
shift
substituteAll "$fileName" "$fileName" "$@"
}
######################################################################
# What follows is the generic builder.
# This function is useful for debugging broken Nix builds. It dumps
# all environment variables to a file `env-vars' in the build
# directory. If the build fails and the `-K' option is used, you can
# then go to the build directory and source in `env-vars' to reproduce
# the environment used for building.
dumpVars() {
if [ "${noDumpEnvVars:-0}" != 1 ]; then
export > "$NIX_BUILD_TOP/env-vars" || true
fi
}
# Utility function: echo the base name of the given path, with the
# prefix `HASH-' removed, if present.
stripHash() {
local strippedName
# On separate line for `set -e`
strippedName="$(basename "$1")"
if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then
echo "$strippedName" | cut -c34-
else
echo "$strippedName"
fi
}
unpackCmdHooks+=(_defaultUnpack)
_defaultUnpack() {
local fn="$1"
if [ -d "$fn" ]; then
# We can't preserve hardlinks because they may have been
# introduced by store optimization, which might break things
# in the build.
cp -pr --reflink=auto "$fn" "$(stripHash "$fn")"
else
case "$fn" in
*.tar.xz | *.tar.lzma)
# Don't rely on tar knowing about .xz.
xz -d < "$fn" | tar xf -
;;
*.tar | *.tar.* | *.tgz | *.tbz2)
# GNU tar can automatically select the decompression method
# (info "(tar) gzip").
tar xf "$fn"
;;
*)
return 1
;;
esac
fi
}
unpackFile() {
curSrc="$1"
header "unpacking source archive $curSrc" 3
if ! runOneHook unpackCmd "$curSrc"; then
echo "do not know how to unpack source archive $curSrc"
exit 1
fi
}
unpackPhase() {
runHook preUnpack
if [ -z "${srcs:-}" ]; then
if [ -z "${src:-}" ]; then
# shellcheck disable=SC2016
echo 'variable $src or $srcs should point to the source'
exit 1
fi
srcs="$src"
fi
# To determine the source directory created by unpacking the
# source archives, we record the contents of the current
# directory, then look below which directory got added. Yeah,
# it's rather hacky.
local dirsBefore=""
for i in *; do
if [ -d "$i" ]; then
dirsBefore="$dirsBefore $i "
fi
done
# Unpack all source archives.
for i in $srcs; do
unpackFile "$i"
done
# Find the source directory.
# set to empty if unset
: ${sourceRoot=}
if [ -n "${setSourceRoot:-}" ]; then
runOneHook setSourceRoot
elif [ -z "$sourceRoot" ]; then
for i in *; do
if [ -d "$i" ]; then
case $dirsBefore in
*\ $i\ *)
;;
*)
if [ -n "$sourceRoot" ]; then
echo "unpacker produced multiple directories"
exit 1
fi
sourceRoot="$i"
;;
esac
fi
done
fi
if [ -z "$sourceRoot" ]; then
echo "unpacker appears to have produced no directories"
exit 1
fi
echo "source root is $sourceRoot"
# By default, add write permission to the sources. This is often
# necessary when sources have been copied from other store
# locations.
if [ "${dontMakeSourcesWritable:-0}" != 1 ]; then
chmod -R u+w "$sourceRoot"
fi
runHook postUnpack
}
patchPhase() {
runHook prePatch
for i in ${patches:-}; do
header "applying patch $i" 3
local uncompress=cat
case "$i" in
*.gz)
uncompress="gzip -d"
;;
*.bz2)
uncompress="bzip2 -d"
;;
*.xz)
uncompress="xz -d"
;;
*.lzma)
uncompress="lzma -d"
;;
esac
# "2>&1" is a hack to make patch fail if the decompressor fails (nonexistent patch, etc.)
# shellcheck disable=SC2086
$uncompress < "$i" 2>&1 | patch ${patchFlags:--p1}
done
runHook postPatch
}
fixLibtool() {
sed -i -e 's^eval sys_lib_.*search_path=.*^^' "$1"
}
configurePhase() {
runHook preConfigure
# set to empty if unset
: ${configureScript=}
: ${configureFlags=}
if [[ -z "$configureScript" && -x ./configure ]]; then
configureScript=./configure
fi
if [ -z "${dontFixLibtool:-}" ]; then
local i
find . -iname "ltmain.sh" -print0 | while IFS='' read -r -d '' i; do
echo "fixing libtool script $i"
fixLibtool "$i"
done
fi
if [[ -z "${dontAddPrefix:-}" && -n "$prefix" ]]; then
configureFlags="${prefixKey:---prefix=}$prefix $configureFlags"
fi
# Add --disable-dependency-tracking to speed up some builds.
if [ -z "${dontAddDisableDepTrack:-}" ]; then
if [ -f "$configureScript" ] && grep -q dependency-tracking "$configureScript"; then
configureFlags="--disable-dependency-tracking $configureFlags"
fi
fi
# By default, disable static builds.
if [ -z "${dontDisableStatic:-}" ]; then
if [ -f "$configureScript" ] && grep -q enable-static "$configureScript"; then
configureFlags="--disable-static $configureFlags"
fi
fi
if [ -n "$configureScript" ]; then
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
$configureFlags ${configureFlagsArray+"${configureFlagsArray[@]}"}
)
echoCmd 'configure flags' "${flagsArray[@]}"
# shellcheck disable=SC2086
$configureScript "${flagsArray[@]}"
unset flagsArray
else
echo "no configure script, doing nothing"
fi
runHook postConfigure
}
buildPhase() {
runHook preBuild
# set to empty if unset
: ${makeFlags=}
if [[ -z "$makeFlags" && ! ( -n "${makefile:-}" || -e Makefile || -e makefile || -e GNUmakefile ) ]]; then
echo "no Makefile, doing nothing"
else
# See https://github.com/NixOS/nixpkgs/pull/1354#issuecomment-31260409
makeFlags="SHELL=$SHELL $makeFlags"
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
${enableParallelBuilding:+-j${NIX_BUILD_CORES} -l${NIX_BUILD_CORES}}
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
$buildFlags ${buildFlagsArray+"${buildFlagsArray[@]}"}
)
echoCmd 'build flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
fi
runHook postBuild
}
checkPhase() {
runHook preCheck
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
${enableParallelBuilding:+-j${NIX_BUILD_CORES} -l${NIX_BUILD_CORES}}
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
${checkFlags:-VERBOSE=y} ${checkFlagsArray+"${checkFlagsArray[@]}"}
${checkTarget:-check}
)
echoCmd 'check flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
runHook postCheck
}
installPhase() {
runHook preInstall
if [ -n "$prefix" ]; then
mkdir -p "$prefix"
fi
installTargets="${installTargets:-install}"
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
$installTargets
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
$installFlags ${installFlagsArray+"${installFlagsArray[@]}"}
)
echoCmd 'install flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
runHook postInstall
}
# The fixup phase performs generic, package-independent stuff, like
# stripping binaries, running patchelf and setting
# propagated-build-inputs.
fixupPhase() {
# Make sure everything is writable so "strip" et al. work.
for output in $outputs; do
if [ -e "${!output}" ]; then chmod -R u+w "${!output}"; fi
done
runHook preFixup
# Apply fixup to each output.
local output
for output in $outputs; do
prefix="${!output}" runHook fixupOutput
done
# Propagate build inputs and setup hook into the development output.
if [ -z "${crossConfig:-}" ]; then
# Not cross-compiling - propagatedBuildInputs are handled identically to propagatedNativeBuildInputs
local propagated="$propagatedNativeBuildInputs"
if [ -n "${propagatedBuildInputs:-}" ]; then
propagated+="${propagated:+ }$propagatedBuildInputs"
fi
if [ -n "${propagated:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
# shellcheck disable=SC2086
printWords $propagated > "${!outputDev}/nix-support/propagated-native-build-inputs"
fi
else
if [ -n "${propagatedBuildInputs:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
# shellcheck disable=SC2086
printWords $propagatedBuildInputs > "${!outputDev}/nix-support/propagated-build-inputs"
fi
if [ -n "${propagatedNativeBuildInputs:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
# shellcheck disable=SC2086
printWords $propagatedNativeBuildInputs > "${!outputDev}/nix-support/propagated-native-build-inputs"
fi
fi
if [ -n "${setupHook:-}" ]; then
mkdir -p "${!outputDev}/nix-support"
substituteAll "$setupHook" "${!outputDev}/nix-support/setup-hook"
fi
# Propagate user-env packages into the output with binaries, TODO?
if [ -n "${propagatedUserEnvPkgs:-}" ]; then
mkdir -p "${!outputBin}/nix-support"
# shellcheck disable=SC2086
printWords $propagatedUserEnvPkgs > "${!outputBin}/nix-support/propagated-user-env-packages"
fi
runHook postFixup
}
installCheckPhase() {
runHook preInstallCheck
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
${enableParallelBuilding:+-j${NIX_BUILD_CORES} -l${NIX_BUILD_CORES}}
$makeFlags ${makeFlagsArray+"${makeFlagsArray[@]}"}
$installCheckFlags ${installCheckFlagsArray+"${installCheckFlagsArray[@]}"}
${installCheckTarget:-installcheck}
)
echoCmd 'installcheck flags' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
unset flagsArray
runHook postInstallCheck
}
distPhase() {
runHook preDist
# Old bash empty array hack
# shellcheck disable=SC2086
local flagsArray=(
$distFlags ${distFlagsArray+"${distFlagsArray[@]}"} ${distTarget:-dist}
)
echo 'dist flags: %q' "${flagsArray[@]}"
make ${makefile:+-f $makefile} "${flagsArray[@]}"
if [ "${dontCopyDist:-0}" != 1 ]; then
mkdir -p "$out/tarballs"
# Note: don't quote $tarballs, since we explicitly permit
# wildcards in there.
# shellcheck disable=SC2086
cp -pvd ${tarballs:-*.tar.gz} "$out/tarballs"
fi
runHook postDist
}
showPhaseHeader() {
local phase="$1"
case "$phase" in
unpackPhase) header "unpacking sources";;
patchPhase) header "patching sources";;
configurePhase) header "configuring";;
buildPhase) header "building";;
checkPhase) header "running tests";;
installPhase) header "installing";;
fixupPhase) header "post-installation fixup";;
installCheckPhase) header "running install tests";;
*) header "$phase";;
esac
}
genericBuild() {
if [ -f "${buildCommandPath:-}" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
source "$buildCommandPath"
eval "$oldOpts"
return
fi
if [ -n "${buildCommand:-}" ]; then
local oldOpts="$(shopt -po nounset)"
set +u
eval "$buildCommand"
eval "$oldOpts"
return
fi
if [ -z "${phases:-}" ]; then
phases="${prePhases:-} unpackPhase patchPhase ${preConfigurePhases:-} \
configurePhase ${preBuildPhases:-} buildPhase checkPhase \
${preInstallPhases:-} installPhase ${preFixupPhases:-} fixupPhase installCheckPhase \
${preDistPhases:-} distPhase ${postPhases:-}";
fi
for curPhase in $phases; do
if [[ "$curPhase" = buildPhase && -n "${dontBuild:-}" ]]; then continue; fi
if [[ "$curPhase" = checkPhase && -z "${doCheck:-}" ]]; then continue; fi
if [[ "$curPhase" = installPhase && -n "${dontInstall:-}" ]]; then continue; fi
if [[ "$curPhase" = fixupPhase && -n "${dontFixup:-}" ]]; then continue; fi
if [[ "$curPhase" = installCheckPhase && -z "${doInstallCheck:-}" ]]; then continue; fi
if [[ "$curPhase" = distPhase && -z "${doDist:-}" ]]; then continue; fi
if [[ -n $NIX_LOG_FD ]]; then
echo "@nix { \"action\": \"setPhase\", \"phase\": \"$curPhase\" }" >&$NIX_LOG_FD
fi
showPhaseHeader "$curPhase"
dumpVars
# Evaluate the variable named $curPhase if it exists, otherwise the
# function named $curPhase.
local oldOpts="$(shopt -po nounset)"
set +u
eval "${!curPhase:-$curPhase}"
eval "$oldOpts"
if [ "$curPhase" = unpackPhase ]; then
cd "${sourceRoot:-.}"
fi
done
}
# Execute the post-hooks.
runHook postHook
# Execute the global user hook (defined through the Nixpkgs
# configuration option stdenv.userHook). This can be used to set
# global compiler optimisation flags, for instance.
runHook userHook
dumpVars
# Disable nounset for nix-shell.
set +u