nixpkgs/doc/manual/installation.xml
Eelco Dolstra 896a9f0508 * Generate a manual page for configuration.nix containing all the
options.

svn path=/nixos/branches/modular-nixos/; revision=16358
2009-07-14 15:47:03 +00:00

391 lines
12 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink">
<title>Installation</title>
<!--===============================================================-->
<section>
<title>Building the installation CD</title>
<para>Instead of building an installation CD, you could just download
one from <link xlink:href="http://nixos.org/nixos/"/>. If you want
(or need) to build it yourself:
<orderedlist>
<listitem><para>Make sure that you have a <emphasis>very</emphasis>
recent pre-release version of Nix installed (<link
xlink:href="http://nixos.org/releases/nix/nix-unstable/"/>).
The NixOS Nix expressions frequently use bleeding-edge features. If
you get any kind of expression evaluation error, try to upgrade your
Nix.</para></listitem>
<listitem><para>Optional but strongly recommended (and currently
<emphasis>required</emphasis> for building the
<literal>x86_64</literal> ISO): subscribe/pull from the Nixpkgs
channel to speed up building, i.e.,
<screen>
$ nix-channel --add http://nixos.org/releases/nixpkgs/channels/nixpkgs-unstable
$ nix-channel --update</screen>
</para></listitem>
<listitem><para>Check out NixOS from <link
xlink:href="https://svn.nixos.org/repos/nix/nixos/trunk"/> as
<literal>nixos</literal>.</para></listitem>
<listitem><para>If you dont already have Nixpkgs checkout, Check
out Nixpkgs from <link
xlink:href="https://svn.nixos.org/repos/nix/nixos/trunk"/> as
<literal>nixpkgs</literal>.</para></listitem>
<listitem><para>In the directory <literal>nixos</literal>, make a
symbolic link <literal>pkgs</literal> to the <literal>pkgs</literal>
directory of the Nixpkgs tree, e.g.,
<screen>
$ ln -s nixpkgs/pkgs nixos/</screen>
</para></listitem>
<listitem><para>Build the ISO image:
<screen>
$ nix-build configuration/rescue-cd.nix -A rescueCD</screen>
If everything goes well, youll end up with an ISO image in
<filename>./result/iso/nixos-<replaceable>version</replaceable>-<replaceable>platform</replaceable>.iso</filename>
that you can burn onto a CD or attach to a virtual CD-ROM drive in
your favourite virtual machine software.</para></listitem>
</orderedlist>
</para>
</section>
<!--===============================================================-->
<section>
<title>Installation</title>
<orderedlist>
<listitem><para>Boot from the CD.</para></listitem>
<listitem><para>The CD contains a basic NixOS installation. (It
also contain Memtest86+, useful if you want to test new hardware.)
When its finished booting, it should have detected most of your
hardware and brought up networking (check
<command>ifconfig</command>). Networking is necessary for the
installer, since it will download lots of stuff (such as source
tarballs or Nixpkgs channel binaries). Its best if you have a DHCP
server on your network. Otherwise configure
manually.</para></listitem>
<listitem><para>The NixOS manual is available on virtual console 7
(press Alt+F7 to access).</para></listitem>
<listitem><para>Login as <literal>root</literal>, empty
password.</para></listitem>
<listitem><para>The NixOS installer doesnt do any partitioning or
formatting yet, so you need to that yourself. Use the following
commands:
<itemizedlist>
<listitem><para>For partitioning:
<command>fdisk</command>.</para></listitem>
<listitem><para>For initialising Ext2/Ext3 partitions:
<command>mke2fs</command>. Ext3 is recommended; use the
<option>-j</option> to create a journalled file system. It is
also recommended that you assign a unique symbolic label to the
file system using the option <option>-L
<replaceable>label</replaceable></option>. This will make the
file system configuration independent from device
changes.</para></listitem>
<listitem><para>For creating swap partitions:
<command>mkswap</command>. Again its recommended to assign a
label to the swap partition: <option>-L
<replaceable>label</replaceable></option>.</para></listitem>
<listitem><para>For creating LVM volumes, the LVM commands, e.g.,
<screen>
$ pvcreate /dev/sda1 /dev/sdb1
$ vgcreate MyVolGroup /dev/sda1 /dev/sdb1
$ lvcreate --size 2G --name bigdisk MyVolGroup
$ lvcreate --size 1G --name smalldisk MyVolGroup</screen>
Possibly youll need to do <userinput>initctl start
lvm</userinput> after this (TODO: check whether this is
needed).</para></listitem>
<listitem><para>For creating software RAID devices:
<command>mdadm</command>.</para></listitem>
</itemizedlist>
</para></listitem>
<listitem><para>Mount the target file system on
<filename>/mnt</filename>.</para></listitem>
<listitem>
<para>The installation is declarative; you need to write a
description of the configuration that you want to be built and
activated. The configuration is specified in a Nix expression and
must be stored <emphasis>on the target file system</emphasis> in
<filename>/mnt/etc/nixos/configuration.nix</filename>. See
<filename>/etc/nixos/nixos/doc/config-examples</filename> for
example machine configurations. You can copy and edit one of
those (e.g., copy
<filename>/etc/nixos/nixos/doc/config-examples/basic.nix</filename>
to <filename>/mnt/etc/nixos/configuration.nix</filename>). See
<xref linkend="ch-options"/> for a list of the available
configuration options. The text editors <command>nano</command>
and <command>vim</command> are available.</para>
<para>In particular you need to specify a root file system in
<option>fileSystems</option> and the target device for the Grub
boot loader in <option>boot.grubDevice</option>.</para>
<para>The command <command>nixos-hardware-scan</command> can
generate an initial configuration file for you, i.e.,
<screen>
$ mkdir -p /mnt/etc/nixos
$ nixos-hardware-scan > /mnt/etc/nixos/configuration.nix</screen>
It tries to figure out the modules necessary for mounting the root
device, as well as various other hardware characteristics.
However, it doesnt try to figure out the
<option>fileSystems</option> option yet.</para>
<para>More examples of NixOS configurations for some actual
machines can be found at <link
xlink:href="https://svn.nixos.org/repos/nix/configurations/trunk/"/>.</para>
<note><para>It is very important that you specify in the option
<option>boot.initrd.extraKernelModules</option> all kernel modules
that are necessary for mounting the root file system, otherwise
the installed system will not be able to boot. (If this happens,
boot from CD again, mount the target file system on
<filename>/mnt</filename>, fix
<filename>/mnt/etc/nixos/configuration.nix</filename> and rerun
<filename>nixos-install</filename>.)
<command>nixos-hardware-scan</command> should figure out the
required modules in most cases.</para></note>
</listitem>
<listitem><para>If your machine has a limited amount of memory, you
may want to activate swap devices now (<command>swapon
<replaceable>device</replaceable></command>). The installer (or
rather, the build actions that it may spawn) may need quite a bit of
RAM, depending on your configuration.</para></listitem>
<listitem><para>Optionally, you can run
<screen>
$ nixos-checkout</screen>
to make the installer use the latest NixOS/Nixpkgs sources from the
Subversion repository, rather than the sources on CD.</para></listitem>
<listitem><para>Do the installation:
<screen>
$ nixos-install</screen>
Cross fingers.</para></listitem>
<listitem><para>If everything went well:
<screen>
$ reboot</screen>
</para></listitem>
<listitem>
<para>You should now be able to boot into the installed NixOS.
The Grub boot menu shows a list of <emphasis>available
configurations</emphasis> (initially just one). Every time you
change the NixOS configuration (see <xref
linkend="sec-changing-config" />), a new item appears in the menu.
This allows you to go back easily to another configuration if
something goes wrong.</para>
<para>You should log in and change the <literal>root</literal>
password with <command>passwd</command>.</para>
<para>Youll probably want to create some user accounts as well,
which can be done with <command>useradd</command>:
<screen>
$ useradd -c 'Eelco Dolstra' -m eelco
$ passwd eelco</screen>
</para>
<para>You may also want to install some software. For instance,
<screen>
$ nix-env -qa \*</screen>
shows what packages are available, and
<screen>
$ nix-env -i w3m</screen>
install the <literal>w3m</literal> browser.</para>
</listitem>
</orderedlist>
<para><xref linkend="ex-install-sequence" /> shows a typical sequence
of commands for installing NixOS on an empty hard drive (here
<filename>/dev/sda). <xref linkend="ex-config" /> shows a
corresponding configuration Nix expression.</filename>
</para>
<example xml:id='ex-install-sequence'><title>Commands for installing NixOS on <filename>/dev/sda</filename></title>
<screen>
$ fdisk /dev/sda <lineannotation>(or whatever device you want to install on)</lineannotation>
$ mke2fs -j -L nixos /dev/sda1 <lineannotation>(idem)</lineannotation>
$ mkswap -L swap /dev/sda2 <lineannotation>(idem)</lineannotation>
$ mount LABEL=nixos /mnt
$ mkdir -p /mnt/etc/nixos
$ nixos-hardware-scan > /mnt/etc/nixos/configuration.nix
$ nano /mnt/etc/nixos/configuration.nix
<lineannotation>(in particular, set the fileSystems and swapDevices options)</lineannotation>
$ nixos-install
$ reboot</screen>
</example>
<example xml:id='ex-config'><title>NixOS configuration</title>
<screen>
{
boot = {
initrd = {
extraKernelModules = [ "ata_piix" ];
};
grubDevice = "/dev/sda";
};
fileSystems = [
{ mountPoint = "/";
label = "nixos";
}
];
swapDevices = [
{ label = "swap"; }
];
services = {
sshd = {
enable = true;
};
};
}</screen>
</example>
</section>
<!--===============================================================-->
<section xml:id="sec-changing-config">
<title>Changing the configuration</title>
<para>The file <filename>/etc/nixos/configuration.nix</filename>
contains the current configuration of your machine. Whenever youve
changed something to that file, or to the NixOS/Nixpkgs sources in
<filename>/etc/nixos/nixos</filename> and
<filename>/etc/nixos/nixpkgs</filename>, respectively, you should do
<screen>
$ nixos-rebuild switch</screen>
to build the new configuration, make it the default configuration for
booting, and try to effect the configuration in the running system
(e.g., by restarting system services).</para>
<para>You can also do
<screen>
$ nixos-rebuild test</screen>
to build the configuration and switch the running system to it, but
without making it the boot default. So if (say) the configuration
locks up your machine, you can just reboot to get back to a working
configuration.</para>
<para>There is also
<screen>
$ nixos-rebuild boot</screen>
to build the configuration and make it the boot default, but not
switch to it now (so it will only take effect after the next
reboot).</para>
<para>Finally, you can do
<screen>
$ nixos-rebuild build</screen>
to build the configuration but nothing more. This is useful to see
whether everything compiles cleanly.</para>
</section>
<!--===============================================================-->
<section>
<title>Keeping NixOS up to date</title>
<para>The currently best way to keep your NixOS installation up to
date is to track the NixOS Subversion repository. You should replace
the static NixOS/Nixpkgs sources installed in
<filename>/etc/nixos</filename> with a Subversion checkout. The
program <command>nixos-checkout</command> does that for you (and it
also installs Subversion into your current profile).</para>
<para>To build the latest and greatest, do
<screen>
$ svn up /etc/nixos/nixos
$ svn up /etc/nixos/nixpkgs
$ nixos-rebuild switch</screen>
(Or instead of <literal>switch</literal>, use any of the alternatives
shown in <xref linkend="sec-changing-config"/>.)</para>
</section>
</chapter>