nixpkgs/nixos/modules/system/boot/stage-1.nix

407 lines
13 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# This module builds the initial ramdisk, which contains an init
# script that performs the first stage of booting the system: it loads
# the modules necessary to mount the root file system, then calls the
# init in the root file system to start the second boot stage.
{ config, lib, pkgs, ... }:
with lib;
let
udev = config.systemd.package;
kernelPackages = config.boot.kernelPackages;
modulesTree = config.system.modulesTree;
# Determine the set of modules that we need to mount the root FS.
modulesClosure = pkgs.makeModulesClosure {
rootModules = config.boot.initrd.availableKernelModules ++ config.boot.initrd.kernelModules;
kernel = modulesTree;
allowMissing = true;
};
# Some additional utilities needed in stage 1, like mount, lvm, fsck
# etc. We don't want to bring in all of those packages, so we just
# copy what we need. Instead of using statically linked binaries,
# we just copy what we need from Glibc and use patchelf to make it
# work.
extraUtils = pkgs.runCommand "extra-utils"
{ buildInputs = [pkgs.nukeReferences];
allowedReferences = [ "out" ]; # prevent accidents like glibc being included in the initrd
doublePatchelf = pkgs.stdenv.isArm;
}
''
set +o pipefail
mkdir -p $out/bin $out/lib
ln -s $out/bin $out/sbin
copy_bin_and_libs () {
[ -f "$out/bin/$(basename $1)" ] && rm "$out/bin/$(basename $1)"
cp -pdv $1 $out/bin
}
# Copy BusyBox.
for BIN in ${pkgs.busybox}/{s,}bin/*; do
copy_bin_and_libs $BIN
done
# Copy some utillinux stuff.
copy_bin_and_libs ${pkgs.utillinux}/sbin/blkid
# Copy dmsetup and lvm.
copy_bin_and_libs ${pkgs.lvm2}/sbin/dmsetup
copy_bin_and_libs ${pkgs.lvm2}/sbin/lvm
# Add RAID mdadm tool.
copy_bin_and_libs ${pkgs.mdadm}/sbin/mdadm
# Copy udev.
copy_bin_and_libs ${udev}/lib/systemd/systemd-udevd
copy_bin_and_libs ${udev}/bin/udevadm
for BIN in ${udev}/lib/udev/*_id; do
copy_bin_and_libs $BIN
done
# Copy modprobe.
copy_bin_and_libs ${pkgs.kmod}/bin/kmod
ln -sf kmod $out/bin/modprobe
${config.boot.initrd.extraUtilsCommands}
# Copy ld manually since it isn't detected correctly
cp -pv ${pkgs.glibc}/lib/ld*.so.? $out/lib
# Copy all of the needed libraries for the binaries
for BIN in $(find $out/{bin,sbin} -type f); do
echo "Copying libs for bin $BIN"
LDD="$(ldd $BIN)" || continue
LIBS="$(echo "$LDD" | awk '{print $3}' | sed '/^$/d')"
for LIB in $LIBS; do
[ ! -f "$out/lib/$(basename $LIB)" ] && cp -pdv $LIB $out/lib
while [ "$(readlink $LIB)" != "" ]; do
LINK="$(readlink $LIB)"
if [ "${LINK:0:1}" != "/" ]; then
LINK="$(dirname $LIB)/$LINK"
fi
LIB="$LINK"
[ ! -f "$out/lib/$(basename $LIB)" ] && cp -pdv $LIB $out/lib
done
done
done
# Strip binaries further than normal.
chmod -R u+w $out
stripDirs "lib bin" "-s"
# Run patchelf to make the programs refer to the copied libraries.
for i in $out/bin/* $out/lib/*; do if ! test -L $i; then nuke-refs $i; fi; done
for i in $out/bin/*; do
if ! test -L $i; then
echo "patching $i..."
patchelf --set-interpreter $out/lib/ld*.so.? --set-rpath $out/lib $i || true
if [ -n "$doublePatchelf" ]; then
patchelf --set-interpreter $out/lib/ld*.so.? --set-rpath $out/lib $i || true
fi
fi
done
# Make sure that the patchelf'ed binaries still work.
echo "testing patched programs..."
$out/bin/ash -c 'echo hello world' | grep "hello world"
export LD_LIBRARY_PATH=$out/lib
$out/bin/mount --help 2>&1 | grep -q "BusyBox"
$out/bin/blkid --help 2>&1 | grep -q 'libblkid'
$out/bin/udevadm --version
$out/bin/dmsetup --version 2>&1 | tee -a log | grep -q "version:"
LVM_SYSTEM_DIR=$out $out/bin/lvm version 2>&1 | tee -a log | grep -q "LVM"
$out/bin/mdadm --version
${config.boot.initrd.extraUtilsCommandsTest}
''; # */
# The initrd only has to mount / or any FS marked as necessary for
# booting (such as the FS containing /nix/store, or an FS needed for
# mounting /, like / on a loopback).
fileSystems = filter
(fs: fs.neededForBoot || elem fs.mountPoint [ "/" "/nix" "/nix/store" "/var" "/var/log" "/var/lib" "/etc" ])
(attrValues config.fileSystems);
udevRules = pkgs.stdenv.mkDerivation {
name = "udev-rules";
buildCommand = ''
mkdir -p $out
echo 'ENV{LD_LIBRARY_PATH}="${extraUtils}/lib"' > $out/00-env.rules
cp -v ${udev}/lib/udev/rules.d/60-cdrom_id.rules $out/
cp -v ${udev}/lib/udev/rules.d/60-persistent-storage.rules $out/
cp -v ${udev}/lib/udev/rules.d/80-drivers.rules $out/
cp -v ${pkgs.lvm2}/lib/udev/rules.d/*.rules $out/
${config.boot.initrd.extraUdevRulesCommands}
for i in $out/*.rules; do
substituteInPlace $i \
--replace ata_id ${extraUtils}/bin/ata_id \
--replace scsi_id ${extraUtils}/bin/scsi_id \
--replace cdrom_id ${extraUtils}/bin/cdrom_id \
--replace ${pkgs.utillinux}/sbin/blkid ${extraUtils}/bin/blkid \
--replace /sbin/blkid ${extraUtils}/bin/blkid \
--replace ${pkgs.lvm2}/sbin ${extraUtils}/bin \
--replace /sbin/mdadm ${extraUtils}/bin/mdadm \
--replace /bin/sh ${extraUtils}/bin/sh
done
# Work around a bug in QEMU, which doesn't implement the "READ
# DISC INFORMATION" SCSI command:
# https://bugzilla.redhat.com/show_bug.cgi?id=609049
# As a result, `cdrom_id' doesn't print
# ID_CDROM_MEDIA_TRACK_COUNT_DATA, which in turn prevents the
# /dev/disk/by-label symlinks from being created. We need these
# in the NixOS installation CD, so use ID_CDROM_MEDIA in the
# corresponding udev rules for now. This was the behaviour in
# udev <= 154. See also
# http://www.spinics.net/lists/hotplug/msg03935.html
substituteInPlace $out/60-persistent-storage.rules \
--replace ID_CDROM_MEDIA_TRACK_COUNT_DATA ID_CDROM_MEDIA
''; # */
};
# The binary keymap for busybox to load at boot.
busyboxKeymap = pkgs.runCommand "boottime-keymap"
{ preferLocalBuild = true; }
''
${pkgs.kbd}/bin/loadkeys -qb "${config.i18n.consoleKeyMap}" > $out ||
${pkgs.kbd}/bin/loadkeys -qbu "${config.i18n.consoleKeyMap}" > $out
'';
# The init script of boot stage 1 (loading kernel modules for
# mounting the root FS).
bootStage1 = pkgs.substituteAll {
src = ./stage-1-init.sh;
shell = "${extraUtils}/bin/ash";
isExecutable = true;
inherit udevRules extraUtils modulesClosure busyboxKeymap;
inherit (config.boot) resumeDevice devSize runSize;
inherit (config.boot.initrd) checkJournalingFS
preLVMCommands postDeviceCommands postMountCommands kernelModules;
resumeDevices = map (sd: if sd ? device then sd.device else "/dev/disk/by-label/${sd.label}")
(filter (sd: sd ? label || hasPrefix "/dev/" sd.device) config.swapDevices);
fsInfo =
let f = fs: [ fs.mountPoint (if fs.device != null then fs.device else "/dev/disk/by-label/${fs.label}") fs.fsType fs.options ];
in pkgs.writeText "initrd-fsinfo" (concatStringsSep "\n" (concatMap f fileSystems));
setHostId = optionalString (config.networking.hostId != null) ''
hi="${config.networking.hostId}"
${if pkgs.stdenv.isBigEndian then ''
echo -ne "\x''${hi:0:2}\x''${hi:2:2}\x''${hi:4:2}\x''${hi:6:2}" > /etc/hostid
'' else ''
echo -ne "\x''${hi:6:2}\x''${hi:4:2}\x''${hi:2:2}\x''${hi:0:2}" > /etc/hostid
''}
'';
};
# The closure of the init script of boot stage 1 is what we put in
# the initial RAM disk.
initialRamdisk = pkgs.makeInitrd {
inherit (config.boot.initrd) compressor prepend;
contents =
[ { object = bootStage1;
symlink = "/init";
}
{ object = pkgs.writeText "mdadm.conf" config.boot.initrd.mdadmConf;
symlink = "/etc/mdadm.conf";
}
{ object = pkgs.stdenv.mkDerivation {
name = "initrd-kmod-blacklist-ubuntu";
builder = pkgs.writeText "builder.sh" ''
source $stdenv/setup
target=$out
${pkgs.perl}/bin/perl -0pe 's/## file: iwlwifi.conf(.+?)##/##/s;' $src > $out
'';
src = "${pkgs.kmod-blacklist-ubuntu}/modprobe.conf";
};
symlink = "/etc/modprobe.d/ubuntu.conf";
}
];
};
in
{
options = {
boot.resumeDevice = mkOption {
type = types.str;
default = "";
example = "/dev/sda3";
description = ''
Device for manual resume attempt during boot. This should be used primarily
if you want to resume from file. If left empty, the swap partitions are used.
Specify here the device where the file resides.
You should also use <varname>boot.kernelParams</varname> to specify
<literal><replaceable>resume_offset</replaceable></literal>.
'';
};
boot.initrd.prepend = mkOption {
default = [ ];
type = types.listOf types.str;
description = ''
Other initrd files to prepend to the final initrd we are building.
'';
};
boot.initrd.checkJournalingFS = mkOption {
default = true;
type = types.bool;
description = ''
Whether to run <command>fsck</command> on journaling filesystems such as ext3.
'';
};
boot.initrd.mdadmConf = mkOption {
default = "";
type = types.lines;
description = ''
Contents of <filename>/etc/mdadm.conf</filename> in stage 1.
'';
};
boot.initrd.preLVMCommands = mkOption {
default = "";
type = types.lines;
description = ''
Shell commands to be executed immediately before LVM discovery.
'';
};
boot.initrd.postDeviceCommands = mkOption {
default = "";
type = types.lines;
description = ''
Shell commands to be executed immediately after stage 1 of the
boot has loaded kernel modules and created device nodes in
<filename>/dev</filename>.
'';
};
boot.initrd.postMountCommands = mkOption {
default = "";
type = types.lines;
description = ''
Shell commands to be executed immediately after the stage 1
filesystems have been mounted.
'';
};
boot.initrd.extraUtilsCommands = mkOption {
internal = true;
default = "";
type = types.lines;
description = ''
Shell commands to be executed in the builder of the
extra-utils derivation. This can be used to provide
additional utilities in the initial ramdisk.
'';
};
boot.initrd.extraUtilsCommandsTest = mkOption {
internal = true;
default = "";
type = types.lines;
description = ''
Shell commands to be executed in the builder of the
extra-utils derivation after patchelf has done its
job. This can be used to test additional utilities
copied in extraUtilsCommands.
'';
};
boot.initrd.extraUdevRulesCommands = mkOption {
internal = true;
default = "";
type = types.lines;
description = ''
Shell commands to be executed in the builder of the
udev-rules derivation. This can be used to add
additional udev rules in the initial ramdisk.
'';
};
boot.initrd.compressor = mkOption {
internal = true;
default = "gzip -9n";
type = types.str;
description = "The compressor to use on the initrd image.";
example = "xz";
};
boot.initrd.supportedFilesystems = mkOption {
default = [ ];
example = [ "btrfs" ];
type = types.listOf types.string;
description = "Names of supported filesystem types in the initial ramdisk.";
};
fileSystems = mkOption {
options.neededForBoot = mkOption {
default = false;
type = types.bool;
description = ''
If set, this file system will be mounted in the initial
ramdisk. By default, this applies to the root file system
and to the file system containing
<filename>/nix/store</filename>.
'';
};
};
};
config = mkIf (!config.boot.isContainer) {
assertions = [
{ assertion = any (fs: fs.mountPoint == "/") (attrValues config.fileSystems);
message = "The fileSystems option does not specify your root file system.";
}
{ assertion = let inherit (config.boot) resumeDevice; in
resumeDevice == "" || builtins.substring 0 1 resumeDevice == "/";
message = "boot.resumeDevice has to be an absolute path."
+ " Old \"x:y\" style is no longer supported.";
}
];
system.build.bootStage1 = bootStage1;
system.build.initialRamdisk = initialRamdisk;
system.build.extraUtils = extraUtils;
system.requiredKernelConfig = with config.lib.kernelConfig; [
(isYes "TMPFS")
(isYes "BLK_DEV_INITRD")
];
boot.initrd.supportedFilesystems = map (fs: fs.fsType) fileSystems;
};
}