nixpkgs/nixos/modules/services/networking/hylafax/systemd.nix
Yarny0 c2af1ff281 nixos/hylafax: enable ProtectKernelLogs for most services
Also document that `ProtectClock` blocks access to serial line.
I couldn't found out why this is the case,
but faxgetty complains about the device file
not being accessible with `ProtectClock=true`.
2021-05-14 22:55:50 +02:00

250 lines
8.9 KiB
Nix

{ config, lib, pkgs, ... }:
let
inherit (lib) mkIf mkMerge;
inherit (lib) concatStringsSep optionalString;
cfg = config.services.hylafax;
mapModems = lib.forEach (lib.attrValues cfg.modems);
mkConfigFile = name: conf:
# creates hylafax config file,
# makes sure "Include" is listed *first*
let
mkLines = lib.flip lib.pipe [
(lib.mapAttrsToList (key: map (val: "${key}: ${val}")))
lib.concatLists
];
include = mkLines { Include = conf.Include or []; };
other = mkLines ( conf // { Include = []; } );
in
pkgs.writeText "hylafax-config${name}"
(concatStringsSep "\n" (include ++ other));
globalConfigPath = mkConfigFile "" cfg.faxqConfig;
modemConfigPath =
let
mkModemConfigFile = { config, name, ... }:
mkConfigFile ".${name}"
(cfg.commonModemConfig // config);
mkLine = { name, type, ... }@modem: ''
# check if modem config file exists:
test -f "${pkgs.hylafaxplus}/spool/config/${type}"
ln \
--symbolic \
--no-target-directory \
"${mkModemConfigFile modem}" \
"$out/config.${name}"
'';
in
pkgs.runCommand "hylafax-config-modems" { preferLocalBuild = true; }
''mkdir --parents "$out/" ${concatStringsSep "\n" (mapModems mkLine)}'';
setupSpoolScript = pkgs.substituteAll {
name = "hylafax-setup-spool.sh";
src = ./spool.sh;
isExecutable = true;
faxuser = "uucp";
faxgroup = "uucp";
lockPath = "/var/lock";
inherit globalConfigPath modemConfigPath;
inherit (cfg) sendmailPath spoolAreaPath userAccessFile;
inherit (pkgs) hylafaxplus runtimeShell;
};
waitFaxqScript = pkgs.substituteAll {
# This script checks the modems status files
# and waits until all modems report readiness.
name = "hylafax-faxq-wait-start.sh";
src = ./faxq-wait.sh;
isExecutable = true;
timeoutSec = toString 10;
inherit (cfg) spoolAreaPath;
inherit (pkgs) runtimeShell;
};
sockets.hylafax-hfaxd = {
description = "HylaFAX server socket";
documentation = [ "man:hfaxd(8)" ];
wantedBy = [ "multi-user.target" ];
listenStreams = [ "127.0.0.1:4559" ];
socketConfig.FreeBind = true;
socketConfig.Accept = true;
};
paths.hylafax-faxq = {
description = "HylaFAX queue manager sendq watch";
documentation = [ "man:faxq(8)" "man:sendq(5)" ];
wantedBy = [ "multi-user.target" ];
pathConfig.PathExistsGlob = [ "${cfg.spoolAreaPath}/sendq/q*" ];
};
timers = mkMerge [
(
mkIf (cfg.faxcron.enable.frequency!=null)
{ hylafax-faxcron.timerConfig.Persistent = true; }
)
(
mkIf (cfg.faxqclean.enable.frequency!=null)
{ hylafax-faxqclean.timerConfig.Persistent = true; }
)
];
hardenService =
# Add some common systemd service hardening settings,
# but allow each service (here) to override
# settings by explicitely setting those to `null`.
# More hardening would be nice but makes
# customizing hylafax setups very difficult.
# If at all, it should only be added along
# with some options to customize it.
let
hardening = {
PrivateDevices = true; # breaks /dev/tty...
PrivateNetwork = true;
PrivateTmp = true;
#ProtectClock = true; # breaks /dev/tty... (why?)
ProtectControlGroups = true;
#ProtectHome = true; # breaks custom spool dirs
ProtectKernelLogs = true;
ProtectKernelModules = true;
ProtectKernelTunables = true;
#ProtectSystem = "strict"; # breaks custom spool dirs
RestrictNamespaces = true;
RestrictRealtime = true;
};
filter = key: value: (value != null) || ! (lib.hasAttr key hardening);
apply = service: lib.filterAttrs filter (hardening // (service.serviceConfig or {}));
in
service: service // { serviceConfig = apply service; };
services.hylafax-spool = {
description = "HylaFAX spool area preparation";
documentation = [ "man:hylafax-server(4)" ];
script = ''
${setupSpoolScript}
cd "${cfg.spoolAreaPath}"
${cfg.spoolExtraInit}
if ! test -f "${cfg.spoolAreaPath}/etc/hosts.hfaxd"
then
echo hosts.hfaxd is missing
exit 1
fi
'';
serviceConfig.ExecStop = "${setupSpoolScript}";
serviceConfig.RemainAfterExit = true;
serviceConfig.Type = "oneshot";
unitConfig.RequiresMountsFor = [ cfg.spoolAreaPath ];
};
services.hylafax-faxq = {
description = "HylaFAX queue manager";
documentation = [ "man:faxq(8)" ];
requires = [ "hylafax-spool.service" ];
after = [ "hylafax-spool.service" ];
wants = mapModems ( { name, ... }: "hylafax-faxgetty@${name}.service" );
wantedBy = mkIf cfg.autostart [ "multi-user.target" ];
serviceConfig.Type = "forking";
serviceConfig.ExecStart = ''${pkgs.hylafaxplus}/spool/bin/faxq -q "${cfg.spoolAreaPath}"'';
# This delays the "readiness" of this service until
# all modems are initialized (or a timeout is reached).
# Otherwise, sending a fax with the fax service
# stopped will always yield a failed send attempt:
# The fax service is started when the job is created with
# `sendfax`, but modems need some time to initialize.
serviceConfig.ExecStartPost = [ "${waitFaxqScript}" ];
# faxquit fails if the pipe is already gone
# (e.g. the service is already stopping)
serviceConfig.ExecStop = ''-${pkgs.hylafaxplus}/spool/bin/faxquit -q "${cfg.spoolAreaPath}"'';
# disable some systemd hardening settings
serviceConfig.PrivateDevices = null;
serviceConfig.RestrictRealtime = null;
};
services."hylafax-hfaxd@" = {
description = "HylaFAX server";
documentation = [ "man:hfaxd(8)" ];
after = [ "hylafax-faxq.service" ];
requires = [ "hylafax-faxq.service" ];
serviceConfig.StandardInput = "socket";
serviceConfig.StandardOutput = "socket";
serviceConfig.ExecStart = ''${pkgs.hylafaxplus}/spool/bin/hfaxd -q "${cfg.spoolAreaPath}" -d -I'';
unitConfig.RequiresMountsFor = [ cfg.userAccessFile ];
# disable some systemd hardening settings
serviceConfig.PrivateDevices = null;
serviceConfig.PrivateNetwork = null;
};
services.hylafax-faxcron = rec {
description = "HylaFAX spool area maintenance";
documentation = [ "man:faxcron(8)" ];
after = [ "hylafax-spool.service" ];
requires = [ "hylafax-spool.service" ];
wantedBy = mkIf cfg.faxcron.enable.spoolInit requires;
startAt = mkIf (cfg.faxcron.enable.frequency!=null) cfg.faxcron.enable.frequency;
serviceConfig.ExecStart = concatStringsSep " " [
"${pkgs.hylafaxplus}/spool/bin/faxcron"
''-q "${cfg.spoolAreaPath}"''
''-info ${toString cfg.faxcron.infoDays}''
''-log ${toString cfg.faxcron.logDays}''
''-rcv ${toString cfg.faxcron.rcvDays}''
];
};
services.hylafax-faxqclean = rec {
description = "HylaFAX spool area queue cleaner";
documentation = [ "man:faxqclean(8)" ];
after = [ "hylafax-spool.service" ];
requires = [ "hylafax-spool.service" ];
wantedBy = mkIf cfg.faxqclean.enable.spoolInit requires;
startAt = mkIf (cfg.faxqclean.enable.frequency!=null) cfg.faxqclean.enable.frequency;
serviceConfig.ExecStart = concatStringsSep " " [
"${pkgs.hylafaxplus}/spool/bin/faxqclean"
''-q "${cfg.spoolAreaPath}"''
"-v"
(optionalString (cfg.faxqclean.archiving!="never") "-a")
(optionalString (cfg.faxqclean.archiving=="always") "-A")
''-j ${toString (cfg.faxqclean.doneqMinutes*60)}''
''-d ${toString (cfg.faxqclean.docqMinutes*60)}''
];
};
mkFaxgettyService = { name, ... }:
lib.nameValuePair "hylafax-faxgetty@${name}" rec {
description = "HylaFAX faxgetty for %I";
documentation = [ "man:faxgetty(8)" ];
bindsTo = [ "dev-%i.device" ];
requires = [ "hylafax-spool.service" ];
after = bindsTo ++ requires;
before = [ "hylafax-faxq.service" "getty.target" ];
unitConfig.StopWhenUnneeded = true;
unitConfig.AssertFileNotEmpty = "${cfg.spoolAreaPath}/etc/config.%I";
serviceConfig.UtmpIdentifier = "%I";
serviceConfig.TTYPath = "/dev/%I";
serviceConfig.Restart = "always";
serviceConfig.KillMode = "process";
serviceConfig.IgnoreSIGPIPE = false;
serviceConfig.ExecStart = ''-${pkgs.hylafaxplus}/spool/bin/faxgetty -q "${cfg.spoolAreaPath}" /dev/%I'';
# faxquit fails if the pipe is already gone
# (e.g. the service is already stopping)
serviceConfig.ExecStop = ''-${pkgs.hylafaxplus}/spool/bin/faxquit -q "${cfg.spoolAreaPath}" %I'';
# disable some systemd hardening settings
serviceConfig.PrivateDevices = null;
serviceConfig.RestrictRealtime = null;
};
modemServices =
lib.listToAttrs (mapModems mkFaxgettyService);
in
{
config.systemd = mkIf cfg.enable {
inherit sockets timers paths;
services = lib.mapAttrs (lib.const hardenService) (services // modemServices);
};
}