nixpkgs/pkgs/build-support/setup-hooks/multiple-outputs.sh
Tuomas Tynkkynen aeeb23853a stdenv: Don't move info pages to the 'man' output
Because if you were to disable man pages via 'programs.man.enable',
the "man" output wouldn't be installed and the info pages would go
missing.
2017-08-11 21:32:55 +03:00

209 lines
7.6 KiB
Bash

# The base package for automatic multiple-output splitting. Used in stdenv as well.
preConfigureHooks+=(_multioutConfig)
preFixupHooks+=(_multioutDocs)
preFixupHooks+=(_multioutDevs)
postFixupHooks+=(_multioutPropagateDev)
# Assign the first string containing nonempty variable to the variable named $1
_assignFirst() {
local varName="$1"
local REMOVE=REMOVE # slightly hacky - we allow REMOVE (i.e. not a variable name)
shift
while [ $# -ge 1 ]; do
if [ -n "${!1}" ]; then eval "${varName}"="$1"; return; fi
shift
done
echo "Error: _assignFirst found no valid variant!"
return 1 # none found
}
# Same as _assignFirst, but only if "$1" = ""
_overrideFirst() {
if [ -z "${!1}" ]; then
_assignFirst "$@"
fi
}
# Setup chains of sane default values with easy overridability.
# The variables are global to be usable anywhere during the build.
# Typical usage in package is defining outputBin = "dev";
_overrideFirst outputDev "dev" "out"
_overrideFirst outputBin "bin" "out"
_overrideFirst outputInclude "$outputDev"
# so-libs are often among the main things to keep, and so go to $out
_overrideFirst outputLib "lib" "out"
_overrideFirst outputDoc "doc" "out"
_overrideFirst outputDevdoc "devdoc" REMOVE # documentation for developers
# man and info pages are small and often useful to distribute with binaries
_overrideFirst outputMan "man" "$outputBin"
_overrideFirst outputDevman "devman" "devdoc" "$outputMan"
_overrideFirst outputInfo "info" "$outputBin"
# Add standard flags to put files into the desired outputs.
_multioutConfig() {
if [ "$outputs" = "out" ] || [ -z "${setOutputFlags-1}" ]; then return; fi;
# try to detect share/doc/${shareDocName}
# Note: sadly, $configureScript detection comes later in configurePhase,
# and reordering would cause more trouble than worth.
if [ -z "$shareDocName" ]; then
local confScript="$configureScript"
if [ -z "$confScript" ] && [ -x ./configure ]; then
confScript=./configure
fi
if [ -f "$confScript" ]; then
local shareDocName="$(sed -n "s/^PACKAGE_TARNAME='\(.*\)'$/\1/p" < "$confScript")"
fi
# PACKAGE_TARNAME sometimes contains garbage.
if [ -n "$shareDocName" ] || echo "$shareDocName" | grep -q '[^a-zA-Z0-9_-]'; then
shareDocName="$(echo "$name" | sed 's/-[^a-zA-Z].*//')"
fi
fi
configureFlags="\
--bindir=${!outputBin}/bin --sbindir=${!outputBin}/sbin \
--includedir=${!outputInclude}/include --oldincludedir=${!outputInclude}/include \
--mandir=${!outputMan}/share/man --infodir=${!outputInfo}/share/info \
--docdir=${!outputDoc}/share/doc/${shareDocName} \
--libdir=${!outputLib}/lib --libexecdir=${!outputLib}/libexec \
--localedir=${!outputLib}/share/locale \
$configureFlags"
installFlags="\
pkgconfigdir=${!outputDev}/lib/pkgconfig \
m4datadir=${!outputDev}/share/aclocal aclocaldir=${!outputDev}/share/aclocal \
$installFlags"
}
# Add rpath prefixes to library paths, and avoid stdenv doing it for $out.
_addRpathPrefix "${!outputLib}"
NIX_NO_SELF_RPATH=1
# Move subpaths that match pattern $1 from under any output/ to the $2 output/
# Beware: only globbing patterns are accepted, e.g.: * ? {foo,bar}
# A special target "REMOVE" is allowed: moveToOutput foo REMOVE
moveToOutput() {
local patt="$1"
local dstOut="$2"
local output
for output in $outputs; do
if [ "${!output}" = "$dstOut" ]; then continue; fi
local srcPath
for srcPath in "${!output}"/$patt; do
# apply to existing files/dirs, *including* broken symlinks
if [ ! -e "$srcPath" ] && [ ! -L "$srcPath" ]; then continue; fi
if [ "$dstOut" = REMOVE ]; then
echo "Removing $srcPath"
rm -r "$srcPath"
else
local dstPath="$dstOut${srcPath#${!output}}"
echo "Moving $srcPath to $dstPath"
if [ -d "$dstPath" ] && [ -d "$srcPath" ]
then # attempt directory merge
# check the case of trying to move an empty directory
rmdir "$srcPath" --ignore-fail-on-non-empty
if [ -d "$srcPath" ]; then
mv -t "$dstPath" "$srcPath"/*
rmdir "$srcPath"
fi
else # usual move
mkdir -p "$(readlink -m "$dstPath/..")"
mv "$srcPath" "$dstPath"
fi
fi
# remove empty directories, printing iff at least one gets removed
local srcParent="$(readlink -m "$srcPath/..")"
if rmdir "$srcParent"; then
echo "Removing empty $srcParent/ and (possibly) its parents"
rmdir -p --ignore-fail-on-non-empty "$(readlink -m "$srcParent/..")" \
2> /dev/null || true # doesn't ignore failure for some reason
fi
done
done
}
# Move documentation to the desired outputs.
_multioutDocs() {
local REMOVE=REMOVE # slightly hacky - we expand ${!outputFoo}
moveToOutput share/info "${!outputInfo}"
moveToOutput share/doc "${!outputDoc}"
moveToOutput share/gtk-doc "${!outputDevdoc}"
# the default outputMan is in $bin
moveToOutput share/man "${!outputMan}"
moveToOutput share/man/man3 "${!outputDevman}"
}
# Move development-only stuff to the desired outputs.
_multioutDevs() {
if [ "$outputs" = "out" ] || [ -z "${moveToDev-1}" ]; then return; fi;
moveToOutput include "${!outputInclude}"
# these files are sometimes provided even without using the corresponding tool
moveToOutput lib/pkgconfig "${!outputDev}"
moveToOutput share/pkgconfig "${!outputDev}"
moveToOutput lib/cmake "${!outputDev}"
moveToOutput share/aclocal "${!outputDev}"
# don't move *.la, as libtool needs them in the directory of the library
for f in "${!outputDev}"/{lib,share}/pkgconfig/*.pc; do
echo "Patching '$f' includedir to output ${!outputInclude}"
sed -i "/^includedir=/s,=\${prefix},=${!outputInclude}," "$f"
done
}
# Make the "dev" propagate other outputs needed for development.
# Note: with current cross-building setup, all packages are "native" if not cross-building;
# however, if cross-building, the outputs are non-native. We have to choose the right file.
_multioutPropagateDev() {
if [ "$outputs" = "out" ]; then return; fi;
local outputFirst
for outputFirst in $outputs; do
break
done
local propagaterOutput="$outputDev"
if [ -z "$propagaterOutput" ]; then
propagaterOutput="$outputFirst"
fi
# Default value: propagate binaries, includes and libraries
if [ -z "${propagatedBuildOutputs+1}" ]; then
local po_dirty="$outputBin $outputInclude $outputLib"
set +o pipefail
propagatedBuildOutputs=`echo "$po_dirty" \
| tr -s ' ' '\n' | grep -v -F "$propagaterOutput" \
| sort -u | tr '\n' ' ' `
set -o pipefail
fi
# The variable was explicitly set to empty or we resolved it so
if [ -z "$propagatedBuildOutputs" ]; then
return
fi
local propagatedBuildInputsFile
if [ -z "$crossConfig" ]; then
propagatedBuildInputsFile=propagated-native-build-inputs
else
propagatedBuildInputsFile=propagated-build-inputs
fi
mkdir -p "${!propagaterOutput}"/nix-support
for output in $propagatedBuildOutputs; do
echo -n " ${!output}" >> "${!propagaterOutput}"/nix-support/$propagatedBuildInputsFile
done
}